Server :: Redirection With Different Folders Over Apache2
Nov 6, 2010
I have a problem about redirection over Apache2 over Debian Lenny. We have build a LAMP, and our programmer make a software with these features:
When you put on your browser (i.e.) [URL], you access to the program in /var/www/vhosts/hugohome/inside. And when you put [URL] you access to the program in /var/www/vhosts/hugohome/outside. Today, if you just put [URL] our Apache answers 403 (forbidden), because we had blocked folder access. (You know....isn't the right way). Our Apache's Document Root is in /var/www/vhosts/hugohome.
Our goal is to change definitely [URL] to access -> /var/www/vhosts/hugohome/inside. This is our main intention. Also, we can continue with [URL] pointing to /var/www/vhosts/hugohome/outside. I thought, hmm easy!: I can change the DocumentRoot to /var/www/vhosts/hugohome/inside and try with an Alias to outside. But the problem is that the programmer has taken the software reference with /var/www/vhosts/hugohome and when I tried to change the Document Root the programs didn't work fine (loops, error 404, etc).
How can I do?. I have tried with Apache with many manners, but I just have a relative success with: "RedirectMatch ^/$ [URL]". It works, but the Browser shows the ugly [URL]. Our intention is just show [URL]. Unfortunately we can't work directly with the DNS servers, and I guess that I can resolve with (i.e.) Apache and Bind together.
I have a webserver apache2 on debian Lenny. I am using gateway as Dom0 and rest of the operating systems are different Dom's .Using a xen virtualization setup.
I want to have a few websites http://site1.myserver.com http://myserver.com and http://myserver.com/site2 I did set up a reverse proxy environment for doing this.
Code: Dom0 LAN IP ----> 192.168.1.1 Gateway (where reverse proxy is set) DomU1 LAN IP ----> 192.168.1.13 (here myserver.com and site1.myserver.com both are hosted.) Domu2 LAN IP ----> 192.168.1.17 myserver.com/site2 is here.
Configuration on Dom0 of sites site1.myserver.com and myserver.com Virtual Host Configurations on Dom0 in /etc/apache2/sites-enabled/myserver.com (on gateway)
Code: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName myserver.com ProxyRequests off <Proxy *> Order deny,allow Allow from all .....
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80 no listening sockets available, shutting down Unable to open logs failed!
I configured my apache2. On my Intrepid I had apache2.0 while on my Karmic I have a apache2.2. Aftere configuring I tested it and got a an error page when I tested it in my web browser. I looked into the log file that showed the following error "[client 127.0.0.1] (13)Permission denied: access to /my_dir/ denied".
It appears apache2.2 can't access directories in my home folder. File system rights for the files and folders are correct. There is no AppArmor profile for Apache. User settings in "/etc/apache2/apache2.conf" file are correct. The inaccessible folder in "/etc/apache2/sites-available/default" looks as follows:
[Code]...
A trick using symbolic links didn't work either. On my previous Intrepid with Apache 2.0 my pages worked like a charm. Now on my current Karmic (before apache2.conf was pre configured, now it's not) with Apache 2.2 my pages are wrecked. how I can make Apache2.2 access folders in my home folder and which settings are needed in default file for that?
I got a peculiar request at work, and maybe you folks can help me out.I want to rewrite URL 'foo.com' as 'bar.com' (in the browser address bar) still display the content of 'foo.com'
I'm running a server with Ubuntu 10.04 installed. I recently set up a VirtualHost (I'll call it my.website.com), like I have in the past without any problems. But this time, I'm stumped. When I connect to my.website.com, it should hit port 80, right? It doesn't; rather, it hits port 8000. I don't have any rewrites/redirections (I checked wherever possible) and checked apache2.conf (httpd.conf is empty).
I'm in a bit dilemma on how to set IP based forwarding to specific URL. I have internal staff from 207.173.4.xxx going to www.domain.com. I would like to forward them to www2.domain.com when they are offsite and working remotely from different IP address range. Is there way to achieve this with Apache? If not, is there a software solution to achieve this effect?
I have a site [URL] right now what you are seeing is a default Tomcat6 page. I am using mod_ajp as a front end and Apache vhost configuration for same is
Code: <VirtualHost *:80 > ServerName mysite.com ServerAdmin webmaster@localhost ProxyRequests off <Proxy *> Order deny,allow [Code]....
I am trying to use a smartcard with a remote windows computer via the terminal server client. I didn't see any settings in the UI, but I did see a redirectsmartcards property in the conf file. I tried setting it from 0 to 1 but it didn't seem to have any effect (still getting traditional login dialog on remote computer). Does anyone know if this setting is supported or not? I did install pcscd and friends and when I insert the usb smartcard pcscd does show up in /var/log/messages so I think the smartcard is working okay locally.
Here my setup of Apache : I have two virtual hosts on separate IP and on both I am using port :80 one is main website domain.name and another webmail.domain.name. And to get full link path I am using index.html with redirection derectives. My question how I can setup each Vhost to he is own redirection directive to set two full link like: when type webmail.domainname -----> redirect to webmail.domainname/horde/imp/file.php and www.domainname ------> redirect to www.domainname/csr/ Right now working only one of this Vhosts, just problem to separate them when I type www.domainname -----> apache redirect to webmail.domainname.
We are using a webserver and application server for our portal. When my JBoss application is down on the application server, a maintenance page is shown to the user when the user tries to access the portal. When the JBoss application on the application server is up, the webserver redirects the request to the JBoss application server. Now, while the JBoss application is up and I replace the contents of index.html page in apache with the maintenance page contents.
Still the webserver redirects the request to the JBoss application server and the contents of index.html are not shown to the user. I am not able to find out any configurations for this automatic redirection in webserver. By automatic, I mean if the JBoss application is up, then redirect the request to the application server, else show maintenance page. What I want to do is show maintenance page even when my JBoss application is up.
I try to fix bugs on my web server. The remote web server allows redirects to arbitrary domains. Description : The remote web server is configured to redirect users using a HTTP 302, 303 or 307 response. However, the server can redirect to a domain that includes components included in the original request. A remote attacker could exploit this by crafting a URL which appears to resolve to the remote server, but redirects to a malicious location.
I'm running 10.04 with Apache2/PHP5.x I wanted to test some basic cgi scripts, but my browser is displaying the code (#!...) If I run the scripts on the console, they work fine so CGI is not the problem, it's apache. To install the CGI module I ran sudo apt-get install libapache2-mod-perl2 with no problems. By the way, I installed Apache through apt-get instead of doing it manually, but it seems that the installation divides the conf file in different parts, so the regular apache2.conf has this:
Code: # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf [Code]....
I can't figure out what I need to do to get CGI working on my server.
I seem to be having a problem with mod_proxy and https websites. A simple connection to port 80 works fine but all calls to 443 fail.
I had a look at my firewall but can't see anything that would block port 443, although I get no tcpdump traffic on that port on the deb01 client when I try and connect to it. I disabled the firewall but still no luck.
My configuration consists of 3 VMs (KVM) each running a different website.
I get the following error when connecting to ssl deb01
Code: An error occurred during a connection to deb03.example.com.
SSL received a record that exceeded the maximum permissible length.
I am having some problems after installing apache2-mpm-itk on my Debian 5.4 server. From my understanding apache2-mpm-itk will run child processes as root until a http request is received. It then suid's to the username in the VirtualHost directive. This is all working fine, as I can see a few apache processes started by a specific user.
However, the problem is when I try to restart apache. It will kill all the processes running by root but wont kill any of the processes that have been suid'ed to another username.
When i attempt to restart I get this error:
Code: charged:/etc/apache2# /etc/init.d/apache2 restart Restarting web server: apache2 ... waiting (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
[Code]....
If I do a "ps aux | grep apache" before and after I see all the root processes killed, but processes running as specified users from VritualHost directive remaining.
Now I am not an extreme linux power user, but I know a bit.
I downloaded grails [URL]... and installed it. Created a sample application hello world. It was running successfully. In browser [URL].. I was able to see grails running. Now comes the problem. To be able to always start the grails application running after boot I wrote a script in /etc/init.d/software_grails its contents are
[code]...
I have to open command prompt and go to /root/helloworld and then execute grails run-app. you dont have to write the name of application to run it. logging of boot messages is enabled /etc/default/bootlogd BOOTLOGD_ENABLE=Yes. then I opened /var/log/boot.
[code]...
But it does not work. If I am not wrong then above method will work ONLY WHEN some one Logs in not on boot time. Is there a way where I can embed grails in apache2 they [URL]... have not mentioned any thing about apache2 to deploy my applications.
I would like to ask how can I optimize apache2 load on my dedicated server. I am hosting Facebook applications on it, but most users will get a Timed Out message when they try to access it. I was tinkering with MaxClients directive in apache2 config, and it got better, but still it's not best. Programmers are trying their best to optimize the applications at their side, but I am afraid this is an server issue.
I want to learn perl CGI. I tried to configure it on apache server. But when I was searching about it in the net, I faced some difficulties. Each and every post has been leaded me in different way. I am confused now. I have done this,
1. Installed this libapache2-mod-perl2 module
2. Then I checked the /etc/apache2/mods-available/ using ls command for checking the module availability.Here I mentioned the output of ls command.
why apache2 won't run my shell script i made.So in detail this is what i want it to do. I have a apache2 web-server running on my mac and i found some shell commands that control itunes so i wrote a shell script that basically pause's itunes. Now i have put the shell script in the cgi executable folder. and the link for the webpage is http://10.10.0.110/cgi-bin/itunes.sh but when i goto the page in my browser it just keeps loading. I have run other scripts and they work and i don't think you need root access.
Im currently serving a web in apache2; no problems I recently set up squid to filter internet for my LAN users.
***i dont want squid to accelerate WEB requests in my apache2.
So the problem is that SQUID blocks my 192.168.1. LAN denied attemps, so far, its ok BUT IT ALSO BLOCKS ANY OF THE INTERNET USERS TRYING TO REACH MY HOSTED WEB.
Can i have both servers in the same box without interferring each other?
Its a silly problem but I am facing it.The OS is Debian Lenny ,apache2. I am having a webserver.www.mydomain.comand site1.mydomain.comsite1 is on a webserver which is on LAN.
On main server i.e. our Gateway in /etc/apache2/sites-available/ I have
I'm a web developer and I make plug-ins for various shopping cart softwares on demand. because of this I'm constantly installing carts and then immediately updating them/modifying them. The problem I'm having is that I'm having to update the permissions manually all the time (every time I copy a new cart into the /var/www folder). Instead of doing this I'd like apache2 to run under my user, so I don't ever have to update the permissions again. How do I do this?
I have recently downloaded and installed apache2 http server from tarball source (i'm running ubuntu but i think its more fun to use tarballs i don't know why but its how i am) anyway i just installed apache2 and when i go into the servers section of webmin and click on apache web server i get this message:
The Apache server executable /usr/local/apache2/conf/ does not exist. If you have Apache installed, adjust the module configuration to use the correct path. and when i go to the configuration menu i don't understand a word of it.
Dom0 is having public IP. I read a lot of blog and tutorials about name based and IP based hostings and also about mod_proxy. But I am unable to do.
Here is what I am trying to do. I have a webserver on public IP.Which is running Xen on it. There are 4 Guest Operating systems installed on top of Dom0 which are Dom1,Dom2,Dom3,Dom4 These are application servers which are going to serve the requests that come from the main server.Which is Dom0.
All I see is "It works" on all 4 of the hosts. On my LAN on any machine on same subnet if I do [url] of Domu1 message comes
Code:
in browser from LAN gives me a message
Code: It works.
What do I need to do on Dom0 so that requests are forwarded to the appropriate DomUs apache2 is running on all of them including Dom0.Some one suggested me to go for ReverseProxy in Apache2.
I have run a small webserver from my home computer and I can access it fine from computers on my local network, but cannot access it from other networks. I see in wireshark that the traffic is arriving at the computer and I have checked the firewall logs on my computer and nothing is being blocked(I use iptables as a firewall), and I can't see any reason why it shouldn't be working.
