I want to learn perl CGI. I tried to configure it on apache server. But when I was searching about it in the net, I faced some difficulties. Each and every post has been leaded me in different way. I am confused now. I have done this,
1. Installed this libapache2-mod-perl2 module
2. Then I checked the /etc/apache2/mods-available/ using ls command for checking the module availability.Here I mentioned the output of ls command.
Very new to Ubuntu (linux) in general and read various forum and threads to get .pl file to run on a new Ubuntu 9.10.My cgi-bin is in /var/www/site/cgi-bin. The server will run 2 websites site1 and site 2. Site2 is html only and site1 has some cgi and pl files. Everytime i get to the cgi-bin/other_director the browser tries download the file or even if going directly to index.pl. Please find attached my site-available for both default and site1 for your consideration. I also ran a2ensite site1 and a2ensite site2, the reloaded the apache2 serverQuote:
I am new to linux. Currently I am using ubuntu 8.10 desktop operating system. As part of my academic project. I need to configure webserver to access from external. I installed all these using apt-get packages but when it comes to configuration. I am really not understanding. I read some documentation about this configuration but I couldn't get and fully in confused. I formatted my machine 3 times. When I tried to use localhost in firefox its working fine.
1. I need to change port from 80 to 7574. In port.conf I changed, in place of 80. I kept 7574. After that I restart and tried to access but its not working.
2. My admin provide to me. 7574 port to route it into my machine. When the user hits for suppose: 59.160.188.190:7574/project/route.html It should goes to: 192.168.202.236:7574/project/route.html Project folder is in /var/www I wrote the form, to update user vehicle details. They can able to update their details in mysql server from any where.
3. Just I need the application user can access my files and update from their desktop by using path: 59.160.188.190:7574/project
How to update user details (there is no login form is directly visible to every one) in server from their desktop. What I need to configure.
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80 no listening sockets available, shutting down Unable to open logs failed!
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
I am new here and want to lern CentOS. Current I have installed CentOS 5.5 x64 and Perl 5.8.8. Now i have install Perl 5.12.1 which located to /usr/local/bin/perl. But how I can move it to /usr/bin/perl so root based on Perl 5.12.1?
Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
I have scoured the internet in search of a way to implement this 301 redirect on Apache2 to no avail. My distro is Debian 5.0 Lenny. I want all request to sepserver.net to be 301 redirected to [URL]. Does anyone know how to do this? I have never done this before so I could really use a detailed explanation of how to implement this type of 301 that will work.
Having tried different approaches to install (and run!) a webserver certificate from StartSSL on an Apache2 webserver, I had no success at all since three days. There are many web pages out there in the internet, each is naming it other ways, i.e. one speaks from server./etc/ssl/certs/server.pem, another name it /etc/ssl/private/server.key etc. etc.
Is there a common-sense description how to name a private key, how to name the public key, and just important again, where to place them and what what rights they must have to protect them? And, still important, which config file to adopt (default-ssl, or default-ssl.conf).
By the way, I implemented already the certificates in an other environments, and they are all working (tested with the ssl checker [URL] .....).
How to find a common-sense web page for Apache2 on Debian 8.1?
I am trying in debian 8.2 but i am not found packet libapache2-mod-auth-radius whereas i have been include dvd1-3 debian and dvd1-2 update debian in my system. Where is that packet stand?
I've been working on my servers, one of them is Ubuntu and the other one is Debian (Newest), and both seams to have a problem with charset configuration.
They wont register ISO-8859-1, insted it says no value when i look at it with phpinfo() function. It's importen that i feel this is working.
I'm running an up-to-date install of Squeeze, and I'm having an annoying issue where php5 won't parse in userdirs (/home/*/public_html), although it works fine in the main document root (/var/www). I found this bug: [URL] Which seems to say the issue is fixed. However, the last comment for this bug suggests it is still an issue for some.
I've had a look at: /etc/apache2/mods-enabled/php5.conf and commented out the lines suggested in the comment:
[Code]....
..and it still doesn't work. I've googled this and can't find an answer. Anybody know? Am I missing something simple?
I have some perl Web Interfaces for some project tools running on a Linux (Ubuntu) machine, they're in the /var/www directory and I want to view them from other computers on our network.
I have backed up then edited the /etc/apache2/sites-available/default file from:
</Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny
I am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?
Anyone have a simple apache2 configuration file package I could get?I'm trying to serve a internal network site for files throughout my network, (music, video, etc). I remember when I did this with Redhat 5-6 and all I had to do was redirect the folder I wanted to share over apache and it worked. You could click on the file you wanted and it played, etc.For some reason I can't even get apache2 that ships with Ubuntu 10.04.02 to even have a "It worked!" internal site or anything. I haven't configured apache2 ever before. It seems to have grown from one or two configuration files to five or so!
I'm getting the following error when I'm trying to install from 'testing' repo. E: Could not perform immediate configuration on 'perl' I'm doing apt pinning to install XFCE 4.8 on Squeeze. I've already added all the necessary sources and my /etc/apt/preferences file looks like this.
Package: * Pin: release a=testing Pin-Priority: 400 Package: * Pin: release a=unstable Pin-Priority: 300 Here is what I'm trying to install.
I am on a friend's box and we are atm transitioning from stable to sid on his box. Instead of doing the whole thing at one shot via update-manager we are doing it using the apt tools. Now while upgrading, I'm not able to update any of the perl 5.12 packages, perhaps due to circular dependencies or what. This is the error I'm seeing :-
I'm using debian 5 x64 with xfce.Is there a way to configure (start/stop/restart) services (especially Apache2, mySQL and PHP) using a graphical or cli tool? I tried to use sysv-rc, sysv-rc-conf, rcconf and rc-conf in the terminal but Bash didn't find them (Although Synaptic show that sysv-rc is installed).
I'm running 10.04 with Apache2/PHP5.x I wanted to test some basic cgi scripts, but my browser is displaying the code (#!...) If I run the scripts on the console, they work fine so CGI is not the problem, it's apache. To install the CGI module I ran sudo apt-get install libapache2-mod-perl2 with no problems. By the way, I installed Apache through apt-get instead of doing it manually, but it seems that the installation divides the conf file in different parts, so the regular apache2.conf has this:
Code: # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf [Code]....
I can't figure out what I need to do to get CGI working on my server.
I seem to be having a problem with mod_proxy and https websites. A simple connection to port 80 works fine but all calls to 443 fail.
I had a look at my firewall but can't see anything that would block port 443, although I get no tcpdump traffic on that port on the deb01 client when I try and connect to it. I disabled the firewall but still no luck.
My configuration consists of 3 VMs (KVM) each running a different website.
I get the following error when connecting to ssl deb01
Code: An error occurred during a connection to deb03.example.com.
SSL received a record that exceeded the maximum permissible length.
I am having some problems after installing apache2-mpm-itk on my Debian 5.4 server. From my understanding apache2-mpm-itk will run child processes as root until a http request is received. It then suid's to the username in the VirtualHost directive. This is all working fine, as I can see a few apache processes started by a specific user.
However, the problem is when I try to restart apache. It will kill all the processes running by root but wont kill any of the processes that have been suid'ed to another username.
When i attempt to restart I get this error:
Code: charged:/etc/apache2# /etc/init.d/apache2 restart Restarting web server: apache2 ... waiting (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
[Code]....
If I do a "ps aux | grep apache" before and after I see all the root processes killed, but processes running as specified users from VritualHost directive remaining.
Now I am not an extreme linux power user, but I know a bit.
I downloaded grails [URL]... and installed it. Created a sample application hello world. It was running successfully. In browser [URL].. I was able to see grails running. Now comes the problem. To be able to always start the grails application running after boot I wrote a script in /etc/init.d/software_grails its contents are
[code]...
I have to open command prompt and go to /root/helloworld and then execute grails run-app. you dont have to write the name of application to run it. logging of boot messages is enabled /etc/default/bootlogd BOOTLOGD_ENABLE=Yes. then I opened /var/log/boot.
[code]...
But it does not work. If I am not wrong then above method will work ONLY WHEN some one Logs in not on boot time. Is there a way where I can embed grails in apache2 they [URL]... have not mentioned any thing about apache2 to deploy my applications.
I would like to ask how can I optimize apache2 load on my dedicated server. I am hosting Facebook applications on it, but most users will get a Timed Out message when they try to access it. I was tinkering with MaxClients directive in apache2 config, and it got better, but still it's not best. Programmers are trying their best to optimize the applications at their side, but I am afraid this is an server issue.
