I'm in a bit dilemma on how to set IP based forwarding to specific URL. I have internal staff from 207.173.4.xxx going to www.domain.com. I would like to forward them to www2.domain.com when they are offsite and working remotely from different IP address range. Is there way to achieve this with Apache? If not, is there a software solution to achieve this effect?
View 6 RepliesI'm running a server with Ubuntu 10.04 installed. I recently set up a VirtualHost (I'll call it my.website.com), like I have in the past without any problems. But this time, I'm stumped. When I connect to my.website.com, it should hit port 80, right? It doesn't; rather, it hits port 8000. I don't have any rewrites/redirections (I checked wherever possible) and checked apache2.conf (httpd.conf is empty).
View 5 Replies View RelatedHere my setup of Apache :
I have two virtual hosts on separate IP and on both I am using port :80 one is main website domain.name and another webmail.domain.name. And to get full link path I am using index.html with redirection derectives. My question how I can setup each Vhost to he is own redirection directive to set two full link like:
when type webmail.domainname -----> redirect to webmail.domainname/horde/imp/file.php
and www.domainname ------> redirect to www.domainname/csr/
Right now working only one of this Vhosts, just problem to separate them when I type www.domainname -----> apache redirect to webmail.domainname.
index.html
<html>
<head>
<title>WebSite</title>
<meta http-equiv="REFRESH" content="1;url=http://www.domainname/csr/"></HEAD>
<BODY>REDIRECTION</BODY>
</HTML> .....
We are using a webserver and application server for our portal. When my JBoss application is down on the application server, a maintenance page is shown to the user when the user tries to access the portal. When the JBoss application on the application server is up, the webserver redirects the request to the JBoss application server. Now, while the JBoss application is up and I replace the contents of index.html page in apache with the maintenance page contents.
Still the webserver redirects the request to the JBoss application server and the contents of index.html are not shown to the user. I am not able to find out any configurations for this automatic redirection in webserver. By automatic, I mean if the JBoss application is up, then redirect the request to the application server, else show maintenance page. What I want to do is show maintenance page even when my JBoss application is up.
I try to fix bugs on my web server. The remote web server allows redirects to arbitrary domains. Description : The remote web server is configured to redirect users using a HTTP 302, 303 or 307 response. However, the server can redirect to a domain that includes components included in the original request. A remote attacker could exploit this by crafting a URL which appears to resolve to the remote server, but redirects to a malicious location.
View 1 Replies View RelatedI am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies View RelatedSo I am brand new to the Ubuntu Server realm and Linux in general (15 years MS development utilizing MS Servers), and so far have been able to tackle some of the most pain in the butt installs and configs ever (VMWare Server being the worst and least stable, but running good now). I have done the site search thing to find out if there were similar issues surrounding Apache and if the answers were found within those posts.
The issue that I am having is in utilizing Apache as a proxy server for redirecting web traffic on one external IP to multiple internal IP addresses. I have multiple virtual servers and I need apache to act as a pass through / redirection proxy for web traffic. So far, it worked for a bit, then it becomes flaky and starts failing randomly while clicking through some of my sites. The worst offender being my SharePoint site.I rebooted the linux server, and when I try to access one of my pass-through sites, all I received was an error message about server difficulties and possibly too much traffic. After some time had passed, and few refreshes later, I finally received the authentication prompt from my windows web server, but this whole configuration is still unreliable. I sometimes get the password prompt several times where it does not allow me to login with my proper credentails, etc, and other times it just fails to display the page full stop.This is an externally facing SharePoint site.
So there's the Windows side. I also have a WordPress site that has similar issues. With WordPress it's even more odd as I have set the WP site settings to not include the directory /wordpress/ and setup my Proxy to point to the http://xxx.xxx.xxx.xxx/wordpress/ landing. Yet on some actions (i.e. browsing themes) it decides to throw in the wordpress directory causing it to 404, and in other sections it doesn't. This actually sounds more likely a WordPress bug than a Apache bug. file: Default (from available sites):
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
[code]....
We are trying to define an appliance based on Suse for an application server and Web server Apache, so we would like to know configuration best practices for network and security, is there any paper/doc about best practices?
View 3 Replies View RelatedI setup apache server in order to gain access for the smokeping network monitoring system.
I am accessing the system using [URL]
But I want this page access using [URL]
My httpd.conf file looks like :
Alias /smokeping/ "/usr/local/smokeping/htdocs/"
<Directory /usr/local/smokeping/htdocs/>
AllowOverride AuthConfig
DirectoryIndex smokeping.cgi
Options -Indexes ExecCGI
</Directory>
I got a peculiar request at work, and maybe you folks can help me out.I want to rewrite URL 'foo.com' as 'bar.com' (in the browser address bar) still display the content of 'foo.com'
View 2 Replies View RelatedI have a problem about redirection over Apache2 over Debian Lenny. We have build a LAMP, and our programmer make a software with these features:
When you put on your browser (i.e.) [URL], you access to the program in /var/www/vhosts/hugohome/inside. And when you put [URL] you access to the program in /var/www/vhosts/hugohome/outside. Today, if you just put [URL] our Apache answers 403 (forbidden), because we had blocked folder access. (You know....isn't the right way). Our Apache's Document Root is in /var/www/vhosts/hugohome.
Our goal is to change definitely [URL] to access -> /var/www/vhosts/hugohome/inside. This is our main intention. Also, we can continue with [URL] pointing to /var/www/vhosts/hugohome/outside. I thought, hmm easy!: I can change the DocumentRoot to /var/www/vhosts/hugohome/inside and try with an Alias to outside. But the problem is that the programmer has taken the software reference with /var/www/vhosts/hugohome and when I tried to change the Document Root the programs didn't work fine (loops, error 404, etc).
How can I do?. I have tried with Apache with many manners, but I just have a relative success with: "RedirectMatch ^/$ [URL]". It works, but the Browser shows the ugly [URL]. Our intention is just show [URL]. Unfortunately we can't work directly with the DNS servers, and I guess that I can resolve with (i.e.) Apache and Bind together.
I have a site [URL] right now what you are seeing is a default Tomcat6 page. I am using mod_ajp as a front end and Apache vhost configuration for same is
Code:
<VirtualHost *:80 >
ServerName mysite.com
ServerAdmin webmaster@localhost
ProxyRequests off
<Proxy *>
Order deny,allow
[Code]....
I am trying to use a smartcard with a remote windows computer via the terminal server client. I didn't see any settings in the UI, but I did see a redirectsmartcards property in the conf file. I tried setting it from 0 to 1 but it didn't seem to have any effect (still getting traditional login dialog on remote computer). Does anyone know if this setting is supported or not? I did install pcscd and friends and when I insert the usb smartcard pcscd does show up in /var/log/messages so I think the smartcard is working okay locally.
View 2 Replies View RelatedI have a webserver apache2 on debian Lenny. I am using gateway as Dom0 and rest of the operating systems are different Dom's .Using a xen virtualization setup.
I want to have a few websites
http://site1.myserver.com
http://myserver.com
and http://myserver.com/site2
I did set up a reverse proxy environment for doing this.
Code:
Dom0 LAN IP ----> 192.168.1.1 Gateway (where reverse proxy is set)
DomU1 LAN IP ----> 192.168.1.13 (here myserver.com and site1.myserver.com both are hosted.)
Domu2 LAN IP ----> 192.168.1.17 myserver.com/site2 is here.
Configuration on Dom0 of sites site1.myserver.com and myserver.com
Virtual Host Configurations on Dom0 in /etc/apache2/sites-enabled/myserver.com (on gateway)
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
ServerName myserver.com
ProxyRequests off
<Proxy *>
Order deny,allow
Allow from all .....
I have setup apache webserver on RHEL5 working fine for months now. Next task is to add another domain name to the webserver using the same IP address. I have been trying to set up apache name based virtual host for the past several days without success. Each time I try elinks [URL] it went to the main page sales.example1.com. Main page sales.example1.com is on DNS but 2nd domain [URL] is not created on DNS yet. I just doing testing first on /etc/hosts.
10.145.13.10 sales.example1.com sales
10.145.13.10 www.exampletst.com
I have tried googling, search forum, and read documentation. I have checked my httpd.conf file several times but there must be some simple step or config error that I might miss:
Apache version is 2.2.3. Output of my httpd.conf file:-
NameVirtualHost *:80
# Default Virtual Host
<VirtualHost *:80>
ServerName sales.example1.com
DocumentRoot /var/www/html
DirectoryIndex index.html index.shtml index.php
</VirtualHost>
<VirtualHost *:80>
ServerName www.exampletst.com
DocumentRoot /var/www/virtual/tours
ErrorLog /var/log/httpd/tours_error_log
CustomLog /var/log/httpd/tours_access_log common
DirectoryIndex index.html index.shtml
<Directory "/var/www/virtual/tours/">
Options Indexes FollowSymLinks Includes
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies View RelatedIm not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
we need to log web access of a certain set of users for analysis. We decided to setup a proxy server which just logs all the requests but does not do anything else like caching/access control etc.All users will be using a fixed set of computers and hence we can redirect their requests to the proxy. I came across Squid, but found it to be too heavy for our requirements. Is there any other proxy-server software that is good enough for what we want or is Squid the only way?
View 1 Replies View RelatedI need to redirect a domain to a subtree of another subdomain , for example : [URL] should be redirected to [URL] How should I do this ?
View 1 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
What is difference between Ip based server and Namebase Server in (Linux)?
View 4 Replies View RelatedI am trying to set up a web based FTP site on my home server, I got ftp up and running and I can log into it using an ftp client but I want to set it up so I can get to it from the web. I put the directory in the www/html folder but that does not seem to help it
If anyone could point me in the right direction that would be great. I also need to let anonymous users get access to it.
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
I notice that on DistroWatch, the descriptions include "debian based", "arch based", etc. For the newbie, is there any practical difference between the different bases, or is it a Coke vs Pepsi type question?
Is a distro based on Debian say, easier for a newbie to learn or work with than say one that is FreeBSD based?
I've got some source code that loads and plays WAV files through the OSS drivers (and USB audio). The code works even under 2.6.34. Is there any benefit to rewriting the code using the ALSA system?
View 1 Replies View RelatedI am working on a set up, and I like to be able to toggle compiz on and off, or toggle dualscreen on and off. The thing is, I also have conky on my desktop as well as a terminal window embedded in my desktop (that requires compiz). So, when I turn comiz off, or resize my desktop, I want to be able to reposition conky/embedded-terminal and the terminals position is relative to my conky position and the size of my virtual desktop.
I can do this all fine, except that to reposition the terminal I need to kill it then reopen it. But if I kill gnome-terminal it kills ALL gnome-terminals instead of just my embedded one. How can I specifically close my embedded one and leave any others untouched? Lets say that the title of my embedded terminal is "trans777"Also, the trans777 titled gnome-terminal will be killed when compiz is not running.
I want to make virtual name apache server in order to run http and https on my domain, but I found in apache documentation that it is not supported. I ask here because the docs can be old and in the newer version that could be possible.
I use apache vesrion 2.2 and this is waht I want to make:
1. configure my domain name to use http protocol
2. configure subdomain.domain to use https protocol
For now I can start https only in the domain and subdomain but can't do that separately.