Server :: Redirect / Forward Mail To Another User From Specific Address?
Jun 30, 2009
I wish to intercept/forward emails that is sent to one user on multi user mail server.I only want email from one specific address or group,to be redirected and it will be redirected to another user on same server.The email should not arrive in original users inbox.".forward" file can not give me such solution,because ".forward" file will forward all mails to another specific mail id,which i don't want. I want only specific users mails onto another local user.Is this possible in sendmail?Anybody have clear idea of "virtusetable" & "aliases" file?
View 1 Replies
ADVERTISEMENT
Jan 5, 2011
i have configured sendmail server in my lan and it is working fine for me.but there is one little problem for me. i want mails send sunita should be received by vinita.sunita and vinita both are normal users on same pc.
for this i made entry in
Code:
/etc/aliases sunita: vinita
View 14 Replies
View Related
Jan 12, 2010
i have problem with my configuration iptables, i have configured for transparent like this,
for masquerade -> iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
for transparent -> iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 3128
how to make a rule if there 1 address i dont want to redirect to port 3128? in other words 1 specific address just run on port 80.
View 3 Replies
View Related
Nov 13, 2010
I'm having a problem whereby I'm able to send mail to a mailbox from several different email addresses and SMTP servers (gmail, RoadRunner broadband), but I'm unable to send mail to the same address from one particular account, the SMTP server for which runs on a mediaTemple (dv) 3.0 box with CentOS 5 Final.I've spent a full workday on the forums, trying to troubleshoot the issue, and I'm running out of ideas.The server on which I'm having the mail processing problem is a mediaTemple (ve) running Ubuntu 10.04 x64 (Linux 2.6.18-028stab070.7 #1 SMP Fri Oct 1 13:53:00 MSD 2010 x86_64 GNU/Linux), with ISPConfig 3. Here's how I setup the mail-related aspects of the Ubuntu box:
Code:
apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d
[code]....
View 2 Replies
View Related
Jul 1, 2009
I configure squid to work with squidGuard , and all thing work properly , but there is problemfirst look to this squidGuard.confdhhome /usr/local/squidGuard/dblogdir /usr/local/squidGuard/log
src blacklist {
ip 10.0.0.5
}
[code]...
View 1 Replies
View Related
Jan 21, 2011
Can this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
View 1 Replies
View Related
Jun 9, 2009
i am using openssh 5.2-p1, i want to restrict user "admin" to login to the server from a specific IP address, for this purpose i have tried the following blocks in sshd_config file.Following is the part of the sshd_config file which i have modified
#The following commands will only allow specific IP to login to ssh.
#AllowUsers admin user1 user2
#AllowGroups
# override default of no subsystems.Subsystem sftp internal-sftp
Match Group sftpgroup
ChrootDirectory /home
AllowTCPForwarding no[code].....
i want to restrict admin user to login to the server only from 172.16.100.221 IP which can be done by using AllowUser line, but i dont want to use AllowUser line,
View 1 Replies
View Related
Sep 4, 2009
I hv Cent OS 5.3 installed as server. I hv a network of approx 100 desktops and laptops. For a security purpose i want to block certain laptops from gaining a the network access using dhcp. Can we block the ip address leasing if a specific MAC address request for a ip lease?
View 7 Replies
View Related
May 26, 2010
Recently I need to redirect domain name that is a mobile minisite called m.domain.com/abc to external hosting web server ip with like 123.123.123.123/abc in our apache web server. This website is hosting in external. Our apache is 2.0.53, because I am new in Linux, so I don't know how to work out this. I want to know that how can I achieve this? Is it just use the DNS to map it or need to config our apache to work out this? I really urgent to know what can I do for it?
View 5 Replies
View Related
Aug 30, 2010
I vae Ubuntu, postfix. I need to forward e-mail based on sender. Can I do it with .forward ?
E-mail that comes from user@yahoo.com destined to user@mydomain.com to be forwarded to user@gmail.com. Other e-mail that comes from any addresse must not be forwarded.
View 2 Replies
View Related
Feb 26, 2011
im unable to forward a mail with attachment my problem is as below cat /root/data|mail -s "subject" [URL] its not forwarding mail and not throwing any error my attached file is more than 100MB ,will any one me with correct syntax how much length of file can be attached maximum i also tried like this mail -s "subject" [URL] < /root/data its also not working
View 2 Replies
View Related
May 8, 2011
I want to setup a mail virtualserver in apache so that a mail. subdomain whats pointed to the box will automatically goto my roundcube install. i have all of the document root stuff working, however, mail.* doesnt work for a server name.
View 1 Replies
View Related
Oct 31, 2010
Location and syntax of named.conf in Ubuntu's version of BIND 9. I already have an HTTP server (in the form of Apache) along with forum software set up on my Acer netbook. However, the only way I can access the forum software is if I type in my IP address. How do I set up my named.conf to get the IP address to redirect to a domain? I already have my resolv.conf configured to allocate a domain to the IP address, but testing the ping of the site returns a "No such domain" error.
View 1 Replies
View Related
Nov 3, 2010
I have one Centos Server and I want to forward root mail to 1 external account: [URL] I installed sendmail and created /root/.forward with this content: [URL] and I sent a test mail with this command: /usr/sbin/sendmail root <prueba.txt But nothing was forwarded.
After that I ran the same command with the verbose option:
/usr/sbin/sendmail -v root <prueba.txt
And this is the output:
root... Connecting to [127.0.0.1] via relay...
220 localhost.localdomain ESMTP Sendmail 8.13.8/8.13.8; Wed, 3 Nov 2010 21:09:39 -0600
>>> EHLO localhost.localdomain
250-localhost.localdomain Hello myfriend [127.0.0.1], pleased to meet you
250-ENHANCEDSTATUSCODES
[code]....
For some reason sendmail tried to connect to example.com smtp server and couldn't reach it. I am sure this is because the smtp server for example.com domain is not example.com is mail.example.com. Besides mail.example.com requires authentication, username , password and the smtp port is not the default 25 is 9999. configure sendmail to forward root mail to a smtp server that requires authentication, username, password with a not the default 25 port?
View 4 Replies
View Related
Jun 8, 2011
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies
View Related
Mar 18, 2011
how to forward a user to a Microsoft IIS server under the SAME domain name (e.g. www.MySite.com) depending upon url parameter. My goal is to do this without using a subdomain (e.g. events.MySite.com). The diagram below depicts my goal. I want my linux server to decide whether to forward the user to an IIS server or serve them content from apache based on the url (e.g. www.MySite.com/Events).
View 2 Replies
View Related
Jun 28, 2010
The question is pretty much the same as the subject. I have a bunch of debian servers - most of them running exim4 default installations configured as internet site using dpkg-reconfigure exim4-config. It can send mails fine from php scripts and some other applications, but I can't seem to find a way to forward all root mail to some external address. I have tried adding "root: someaddress@example.com" to /etc/aliases and run newaliases command, but it doesn't seem to work.
View 3 Replies
View Related
May 8, 2010
I would like to COMPLETELY block a specific IP address using iptables. I found this one:
Code:
iptables -A INPUT -p tcp -s xxx.xxx.xxx.xxx -j REJECT --reject-with tcp-reset
Will this work? How do I undo the changes later?
View 2 Replies
View Related
Jun 30, 2010
I have create distro groups in zimbra and have add member sin there. when i connect an account on mapi etc. [URL] i have create a persona in order client to send from [URL] rather than [URL] How can i restrict inside postfix to relay using [URL]?
View 1 Replies
View Related
Jul 16, 2010
I m using sendmail-8.13.8-2.el5 along with MailScanner-4.79.11-1
i want to set a rule so that user1@mydomain.com can send only to anotherdomain.com domain. sending mail to any other domain will be rejected. can it be done by sendmail or MailScanner ??
View 1 Replies
View Related
Apr 27, 2011
I'm running gnome desktop on squeeze system. When I boot my system seems to be using my internet modem as its dhcp server. The rest of the machines on my lan are correctly using my router for that purpose. As a result, what happens then is that my debian machine frequently gets a duplicate ip address assigned to it. I would like to specify to my debian computer that I want it to use the specific fixed ip address of my router for dhcp purposes.
View 9 Replies
View Related
Jun 1, 2011
I am trying to setup forward mails to a user in my linux server to procmail. But that doesn't work. My $HOME/.forward looks like the following
[Code]....
View 7 Replies
View Related
May 16, 2011
How do I redirect all the UDP traffic on port 27016 of my current dedicated server to a new IP port 27015 using IP tables?
View 1 Replies
View Related
Feb 23, 2011
I've registered a top-level domain site.com pointing to my IPv6 address (6to4 tunnel). Everything looks ok, dig command, nslookup command shows requested output, but: I'm not able to connect to mail.site.som on 110 port. I still get an error messaged, that connection has been refused. I've populated the ip6tables with commands to open desired port but with no success. I'm listening on 25, am able to connect to this port, but not to 110.
Command netstat -an | grep "LISTEN " shows that I'm not listening on 110 port, although I'm just added this port to the firewall exceptions. Telnet to ::1/tunneled IPv6 address is successful. Postfix installed, configured properly, ping6 working. Everytime I try to send email from external domain, I'm advised that the mail domain is not pointing to A record.
View 6 Replies
View Related
Feb 15, 2010
I just set up a new router for our home office. I've enabled traffic logging, and I'd like to have the logs emailed to me. However, in order to configure email-notification, the router needs and outgoing mail server. Forgive me, but I don't really understand the terminology being used here. I've googled this a bit, but I'm not sure I now what "outgoing" vs "incoming" mean in the context. I tried using my gmail account as the outgoing mail server (smpt.gmail.com) but it requires TTLS encryption, and there's no option for that on my router.
So I figured I'd setup a simple mail server on my local network. I have a dedicated server machine, so I'd just configure a mail server there. But I got stumped at the first input box (in the yast module):"Outgoing Mail Server".That's what I wanted to use this server for. What is this "outgoing mail server"? I understand it in a normal emai context (I think) but this is confusing me. I've read through the HowTo on the openSUSE wiki, but it still doesn't answer this question.Isn't there some way to have a simple, local mail server (without MX records and the like) so I can send email from a local machine?
View 2 Replies
View Related
Apr 5, 2011
I have configured qmaill with mysql database and i am using squirrel mail as a webbase client. I have used qmailadmin to create users email id. user which are create using qmailadmin or vpopadmin are able to login into squirrel mail webbase client. But I am not see those user in squirrel mail global address book. please help and provide me prodedure to create global addres book where i can see all user created using qmailadmin or vpopmail.
View 7 Replies
View Related
Dec 1, 2009
I have setup mail server on Ubuntu 9.10 and it's is working fine.I am using Webmin to addministrate my mail server.My Ubuntu server name abcs.I send a test mail from Wedmin for user gom.Why it keep adding InfoNet. What I would like is setup as gom@abcs.com.
View 1 Replies
View Related
Nov 4, 2009
My ISP blocks outgoing email if it does not login properly with a valid account. I successfully configured sendmail to use SMART_HOST and confAUTH_OPTIONS with confAUTH_MECHANISM set to LOGIN PLAIN.
It successfully sends email because I tested it with evolution sending through 127.0.0.1, but I need to specify myacount@mydomain.com as the email address for root.
But it doesn't work for logwatch because it sends as from root@localhost.localdomain, and my ISP's smtp server rejects it. The message I get back in root@localhost account is the following:
----- Transcript of session follows -----
... while talking to smtp.mydomain.com.:
>>> MAIL From:<root@localhost.localdomain> SIZE=581 AUTH=<>
<<< 550 5.7.1 Client does not have permissions to send as this sender
554 5.0.0 Service unavailable
I thought that I should masquerade all emails from this domain, so I configured sendmail as specified in [1] section "24.3.1.4. Masquerading", but it doesn't work. It seems that masquerading in sendmail is broken or something is wrong in the documentation.
[1] [URL]
I have sendmail 8.13.8-2 and centos-release-5-4.el5.centos.1.
Is there a way to specify the "From:myacount@mydomain.com" in logwatch ? or Is there a way to make it work the masquerading in sendmail so I can masquerade everything as coming from a specific account?
View 4 Replies
View Related
Sep 13, 2010
How can i limit user to their mailbox in specific size.
View 2 Replies
View Related
Nov 30, 2010
I have a real system user say 'test', created in a number of system groups, up to 3 additional groups (including ftp of course). Its set to the usual standard directory /home/test. But what if I wanted to use /home/test as their home directory but login to what would be unknown to them to be ProFTP to make them go in say [URL] or something random like that, how is this done? Just been through things like this:
Quote:
<VirtualHost 192.168.0.255>
ServerName "ftp.mydomain.com"
ServerAdmin "me@localhost"
[code]....
But nothing seems to work.
View 23 Replies
View Related
