I've registered a top-level domain site.com pointing to my IPv6 address (6to4 tunnel). Everything looks ok, dig command, nslookup command shows requested output, but: I'm not able to connect to mail.site.som on 110 port. I still get an error messaged, that connection has been refused. I've populated the ip6tables with commands to open desired port but with no success. I'm listening on 25, am able to connect to this port, but not to 110.
Command netstat -an | grep "LISTEN " shows that I'm not listening on 110 port, although I'm just added this port to the firewall exceptions. Telnet to ::1/tunneled IPv6 address is successful. Postfix installed, configured properly, ping6 working. Everytime I try to send email from external domain, I'm advised that the mail domain is not pointing to A record.
I am running vsftp on one of my systems and when trying to connect to it it errors out with this: vendion@Loki:~> ftp 192.168.1.100 Connected to 192.168.1.100. 500 OOPS: could not bind listening IPv6 socket
I have tried stopping the firewall and even disabling IPv6 nothing changed, any clues as to what is going on?
I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
I'm running a native dual-stack (ipv4 & ipv6) dsl connection.So, I've been adding firewall rules, cleaning up unwanted processes, etc to tighten security.I'm left with only 3 processes that are listening to ports. mysql, ipp & ssh.Still not quite sure I need mysql. I run Amarok but without using a database, so I don't actually use sql for anything that I'm aware of.Anyway, my question is;Is it possible to make any any of these processes listen to ipv4 only or ipv6 only? Is there a distinction there at all?
Example- ssh is currently listening to port 22 on both tcp & tcp6. I do all my ssh connections using 'ssh -6', so, Can I make ssh listen to tcp6 only, or ignore tcp ?
I added an init script numbered just before bind9 starts, which needs to see the ipv6 link-local address on eth0. Sometimes this address is not configured, yet. In all cases it eventually is configured.
I am unable to find any script that is configuring the ipv6 link-local address (which is in part based on the MAC address). Does anyone know if there is some script or program that is supposed to be doing this, or is it an internal kernel function?
One workaround I am considering is making this init script go into a loop around sleep 1 to keep checking for the ipv6 address. But I'm concerned this might cause some problems. Any suggestions? I don't want to let it move on to start bind9 until the configuration this script does (more ipv6 addresses) is done.
This is on Ubuntu 9.10 server (for which there is not a prefix choice).
I'm having a problem whereby I'm able to send mail to a mailbox from several different email addresses and SMTP servers (gmail, RoadRunner broadband), but I'm unable to send mail to the same address from one particular account, the SMTP server for which runs on a mediaTemple (dv) 3.0 box with CentOS 5 Final.I've spent a full workday on the forums, trying to troubleshoot the issue, and I'm running out of ideas.The server on which I'm having the mail processing problem is a mediaTemple (ve) running Ubuntu 10.04 x64 (Linux 2.6.18-028stab070.7 #1 SMP Fri Oct 1 13:53:00 MSD 2010 x86_64 GNU/Linux), with ISPConfig 3. Here's how I setup the mail-related aspects of the Ubuntu box:
I reinstalled unbuntu server recently and i am trying to get it to only allow one computer to accsess it. So after doing this etc/ssh/ sudo nano sshd_config I uncomment #ListenAddress 0.0.0.0 Ok so i am trying to accsess my server from a windows machine so i tpyed ipconfig /all to find my ip I found the IPV4 address and i put that address like so ListenAddress 192.168.1.22 But when i try and connect it says connection refused.
I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
I just set up a new router for our home office. I've enabled traffic logging, and I'd like to have the logs emailed to me. However, in order to configure email-notification, the router needs and outgoing mail server. Forgive me, but I don't really understand the terminology being used here. I've googled this a bit, but I'm not sure I now what "outgoing" vs "incoming" mean in the context. I tried using my gmail account as the outgoing mail server (smpt.gmail.com) but it requires TTLS encryption, and there's no option for that on my router.
So I figured I'd setup a simple mail server on my local network. I have a dedicated server machine, so I'd just configure a mail server there. But I got stumped at the first input box (in the yast module):"Outgoing Mail Server".That's what I wanted to use this server for. What is this "outgoing mail server"? I understand it in a normal emai context (I think) but this is confusing me. I've read through the HowTo on the openSUSE wiki, but it still doesn't answer this question.Isn't there some way to have a simple, local mail server (without MX records and the like) so I can send email from a local machine?
I have configured qmaill with mysql database and i am using squirrel mail as a webbase client. I have used qmailadmin to create users email id. user which are create using qmailadmin or vpopadmin are able to login into squirrel mail webbase client. But I am not see those user in squirrel mail global address book. please help and provide me prodedure to create global addres book where i can see all user created using qmailadmin or vpopmail.
I have setup mail server on Ubuntu 9.10 and it's is working fine.I am using Webmin to addministrate my mail server.My Ubuntu server name abcs.I send a test mail from Wedmin for user gom.Why it keep adding InfoNet. What I would like is setup as gom@abcs.com.
I wish to intercept/forward emails that is sent to one user on multi user mail server.I only want email from one specific address or group,to be redirected and it will be redirected to another user on same server.The email should not arrive in original users inbox.".forward" file can not give me such solution,because ".forward" file will forward all mails to another specific mail id,which i don't want. I want only specific users mails onto another local user.Is this possible in sendmail?Anybody have clear idea of "virtusetable" & "aliases" file?
My ISP blocks outgoing email if it does not login properly with a valid account. I successfully configured sendmail to use SMART_HOST and confAUTH_OPTIONS with confAUTH_MECHANISM set to LOGIN PLAIN.
It successfully sends email because I tested it with evolution sending through 127.0.0.1, but I need to specify myacount@mydomain.com as the email address for root.
But it doesn't work for logwatch because it sends as from root@localhost.localdomain, and my ISP's smtp server rejects it. The message I get back in root@localhost account is the following:
----- Transcript of session follows ----- ... while talking to smtp.mydomain.com.: >>> MAIL From:<root@localhost.localdomain> SIZE=581 AUTH=<> <<< 550 5.7.1 Client does not have permissions to send as this sender 554 5.0.0 Service unavailable
I thought that I should masquerade all emails from this domain, so I configured sendmail as specified in [1] section "24.3.1.4. Masquerading", but it doesn't work. It seems that masquerading in sendmail is broken or something is wrong in the documentation.
[1] [URL]
I have sendmail 8.13.8-2 and centos-release-5-4.el5.centos.1.
Is there a way to specify the "From:myacount@mydomain.com" in logwatch ? or Is there a way to make it work the masquerading in sendmail so I can masquerade everything as coming from a specific account?
I have a problem with my ipv6 connection: although I can't get ipv6 address with DHCP, I can't use ipv6 network. I tried [URL], and the tortoise is static. I want to fix it out , so I use 'ifconfig' to see my network configuration:
Some people told me that the fisrt ipv6 address was wrong and unsuitable for ipv6 connecting. I tried /ect/init.d/networking restart but it didn't work. How can I use the second address as my ipv6 address and fix the problem out ? Now it seems there is not problem with the ip adress but the route. After watching some video, I suddenly could use ipv6. I did 'ifconfig' again and nothing was different. However, the result from the command 'ip -f inet6 route' changed: the last default route was gone and there was only one default route.
I have a networking problem with my computer. Under Windows, the computer can get both v4 and v6 address via DHCP. However, the same computer can only get v4 address under Ubuntu. Does anybody know how to solve this problem?
and to do a test i want to disable or delete the ipv6 address, but mainteining the other configured parameters. Looking on the ifcfg config file I have
I want to add an ipv6 address in linux. i am going to use the following command. # /sbin/ifconfig <interface> inet6 add <ipv6address>/<prefixlength> Can anyone explain how this command will works? Is that prefix length value is fixed to 64 or is it vary?if so,can you explain how it could be?
When I do ifconfig than IPv6 address is appearing on an interface. However when I run the system-config-network and select to edit same interface than it shows the normal ip4 192.168.1.x address. Why is it like that? ipv4 at one place and ipv6 at other?
I have an Ubuntu 10.04 server/router with IPv6 internet connectivity (I have an internet routable /64 subnet). Since I have this abundance of IPv6 addresses I wanted to try and assign v6 addresses to specific users on the local system. I've been looking at ip6tables with packet mangling but I don't seem to be able to find out how to do this or if this is even possible.
Current configuration: eth0: Local network, has the /64 IPv6 public range active and the IPv4 LAN range. tun0: 6in4 tunnel with a ISP assigned public v6 address. eth1: Standard IPv4 internet connection.
All users on my system use the v6 address configured on tun0. I want to force them to use the /64 range which is configured on eth0. If I can force users to use a specific v6 address, I'll configure more then one v6 address on this interface based on the users userID on the system.
I use DNS on my server as a chasing DNS so its not fully configured. I seem to be having trouble with IPV6 addresses. I'm guessing this is linked to the 6to4 tunnel I have set up to my windows box, but I'm not really sure.
I've two WLAN AP's with both a different IPv6 subnet. When I change from one AP to the other, my IPv6 Global address stays valid and so is the default IPv6 gateway. After a while I get another Global address from the second AP's subnet and another default IPv6 gateway for the second subnet. Both have the same metric. IPv6 connectivity is broken now. When I disable wireless on the laptop and reenable it, it flushes all IP addresses and receives new ones and connectivity is restored. Does anyone know if this is normal behaviour or should it normaly flush all the addresses when changing network? It's a bit silly to have to disable/enable wireless all the time..
But, when I restart the network service this IPv6 address is gone. How could I make it as a permanent IPv6 address( that should be edited or deleted when I want but not when I only restart the network)to my interface?
On our Home LAN, we have several different SuSE machines running. Now, I have run into a problem which I cannot solve myself. One of the computers (a 11.2) just doesn't receive any IPv6 lease from the main router. The router has radvd running and distributes addresses to the other computers just fine. The network card on the box ist a
I can reach other hosts by means of their global addresses by either the IP address or hostname (that has the global address). What I want to (also) do is have a hostname that references the IPv6 link local IP address (an AAAA record in DNS, or just the fe80::<whatever> address in /etc/hosts) and use that host name in commands to access that host. The problem is, an interface ID is needed when making such a reference.
It sure looks like the programs just pass the host name string on to the resolver library, which does not understand the significance of the '%' even though it could find and see that the name preceding the '%' is consistent with that being an IPv6 link local address (e.g. the logic could have been "split at first % and see if preceeding name is found as a link local address and accept that if so, or ignore the split otherwise" ... but it isn't). Is there a different syntax for this ... or was it overlooked in the design of programming around IPv6?I want to be able to address a host by its link local address, while still using a mnemonic instead of having to type the IPv6 address.
My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
