I have a new home server I built this weekend with 4 x 320 GB Seagate Barracuda SATA drives. I am going to load my O.S. this week however I don't have a RAID controller so I would like to utilize 'Software RAID' via 'mdadm' package. My question is since this is a general home server with no specific function rather than hold my data reliabily and resonably fast, how do you guys recommend I configure my partitions for RAID? What level would be best with my 4 drive configuration? RAID5 or RAID10? Should I use a 3 drive RAID and use the 4th as a spare? Please let me know what you recommend as I don't have a lot of expertise with what is not practical or useless when it comes to Mdadm RAID.
I am rebuilding two microsystems servers and I need some advice to make my dreams come true.I want to setup the servers in a RAID configuration and want to install a GUI Linux application to manage a file server, manage a subnet, and host a Moodle on my subnet.I am planning to use Asus eee netbooks running Linux as my client computers. I basically need to be able to get my kids on the web and be able to have them use some open source office suite tools. No major crunching. I'll have two Macs for that.
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
I have 2 windows pc's in my home and an office computer that have my files strewn about. I wanted to have them all in one central location that keeps a backup copy, so i used an old machine to start building a file server. I installed debian 5.0 on the machine, command line interface only. I have gotten ssh working so that i can do all my work on the box from one of my windows pc's by logging in with putty.my current problem is how to easily use the box hard drive for storing my files in an easily accessible way. i'm still working on getting samba to work so that i could map the /home directory to a drive letter on my two home pc's, but i'd also like to access files from my work pc. Before i do that, though, i wanted to know if this is safe and secure to map a drive on a remote machine through the internet? Are there any other security concerns I need to be addressing by having this file server set up?
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf zone "net.local" in { type master; file "/etc/bind/net.local.ns"; allow-update { none; };
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
i recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I am running single drive Ubuntu server 9.10 with a lot of software. Now I want to add one more disk (same size and type) and to convert this to RAID 0 without need of reinsallation. Is it possible and if yes how? I didn't find nothing for RAID 0. It sounds simple, but probably is not.
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
I install 1 of the server build hardware raid 10 with hotspare. now the problem i cant monitor the raid. since it shows as single disk.
So if i need to see any crash disk/failure disk i cant monitor or get logs. can someone advise where to get and how to install the hp smart start for linux or any alternate way available in linux to perform such tasks.
I have a problem configuring a RAID server under Ubuntu 9.10 (kernel 2.6.31.17) with mdadm (v2.6.7.1). First I had some hardware issues that finally got solved by using another motherboard. Now I am dealing with the software part.In order to ease things, I am trying to configure a RAID 5 with three partitions in one disk. I have two HD's, one IDE where the OS lies (recognized as sda), and another where I intend to build the RAID (recognized as sdb). In this second drive I have made three partitions (sdb1, sdb2 & sdb3) of the same size.I've already re-installed Ubuntu 9.10 a couple of times, zeroed the superblocks of the partitions, repartitioned the disks with different partition sizes (I am using 5 GB partitions to save time). I've gone through this process several times, and I really don't know how to move forward now. If RAID is about trust and reliability, this is exactly what I'm not able to get.
I want to install a DLNA server on my ubuntu home server. It will primarily be used for photo browsing on my PS3, but general media support would be nice. (I use Squeezebox server for music.) What are my options, and what are the main difference between them.
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
I have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.
I'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.
Is it possible to do this with no router and only a DSL ISP connection?
I have a home DNS server that has been working for some time today. Today I restarted to restarted it to clear the cache on it and now it refuses to answer and requests. Named starts fine with no errors. Here is named config file that worked for about 2 weeks fine and now doesn't want to work.
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I'd like to know what solutions do you, people, use to backup a live system that acts as a small home mail/file/irc/web server and some other purposes. For example, right now, to backup the mail, I have to stop fetchmail, kill vixie-cron to avoid any problem and then do the backup. Then restart vixie-cron.I wonder if there's any solution that will leave me do the backup without all this hassle.
I have several PCs running w7 and linux. I have a netbook Samsung N150 which has a large HD (250G) and interested in running 24h homeserver mainly for media files. Netbook will be hooked up to LAN and will be streaming wirelessly (have fast connection) thru out the house. Which of the recent distro.
I have both windows (xp and win7) and mac (osx snow leopard) running on my network. I'd like to find a unified system that I could use as a file server. Mainly, I'd like to have it hold music and movies, maybe run some automated backups from a win 7 desktop. I'd also like it to be a print server. I'd like to run the most simple and lightest weight OS for the server os. However, I don't think I have the basic linux knowledge to run Ubuntu Server as it is terminal based. I have installed it on my machine but I feel like im running in circles. I have it installed and can SSH in with my laptop no problem. I feel like I may be better off installing Ubuntu Desktop and removing what I dont need. at htis time the server has only a 40gig hdd in it, i also have a 500gb hdd i'd be using for the files.
I am trying to set up a web based FTP site on my home server, I got ftp up and running and I can log into it using an ftp client but I want to set it up so I can get to it from the web. I put the directory in the www/html folder but that does not seem to help it
If anyone could point me in the right direction that would be great. I also need to let anonymous users get access to it.
