Server :: Postfix 2.8.2 Rejecting Some Mail With User Unknown?

Apr 22, 2011

I have this strange error - I switched from postfix 2.6.5 to 2.8.2 and I some mailservers cannot send mail to me. One of them was some sendmail server. I have virtual alias maps in mysql. It works fine for almost all server that are sending mail to me, but some of them seems to send mails as user@FQDN instead of user@virtualdomain my machine name is x49.tvujweb.cz, and mz email is kamil.horky@servis-it.net but in server logs is that user kamil.horky@x49.tvujweb.cz cannot be found in virtual alias maps.

here is my postconf:

Code:
2bounce_notice_recipient = postmaster
access_map_defer_code = 450
access_map_reject_code = 554
address_verify_cache_cleanup_interval = 12h

[Code]....

View 1 Replies


ADVERTISEMENT

Server :: Postfix Rejecting Mail From Outlook?

Mar 16, 2011

I have enforced to use the Linux /etc/passwd file to authenticate myself from Outlook, Postfix will accept mail from any IPs. However, I'm not able to send mails from my Outlook via my mail server to someone else on the Internet. Am seeing the following in Postfix's log.

Code:
Mar 11 21:07:39 production postfix/smtpd[16366]: connect from pcdxxxxx.netvigator.com[203.218.211.256]
Mar 11 21:07:39 production postfix/smtpd[16366]: NOQUEUE: reject: RCPT from pcdxxxxx.netvigator.com[203.218.211.256]: 554 5.7.1 <someone@hotmail.com>: Relay access denied; from=<mate@mydomain.com> to=<someone@hotmail.com> proto=ESMTP helo=<Windows>
Mar 11 21:07:42 production postfix/smtpd[16366]: disconnect from pcdxxxxx.netvigator.com[203.218.211.256]
Here are my Postfix settings.

[Code]...

View 8 Replies View Related

Server :: Rejecting Mail Where Sender Matches Recipient In Postfix?

Aug 22, 2009

This seems like a relatively simple question, but I haven't been able to figure it out from the documentation after a couple of hours of searching. I'm running postfix on my mail server, and the vast majority of my spam has the sender address spoofed to match the recipient address. I've got spamassassin up and running, and very little gets through that, so it's not a serious problem, but if possible I would like to be able to reject the mail before it arrives to reduce the system load.

Mail is sent locally via webmail, relaying is denied, so the only way that mail should be sent from the domain is via a connection from localhost. The basic idea I'm thinking of is if the MAIL FROM sender claims to be an address at the receiving domain, but is connected from a remote IP, the mail should be rejected.

View 3 Replies View Related

Server :: PostFix - ISPConfig Mail Return - Unknown User" Or "no Such User Here

Feb 9, 2010

I have set up a debian 5 server with ISPConfig and PostFix using Perfect Server toturial [url].

Now i have huge problem i'm getting eather "No such user here" message from SMTP server hosted at hosting provider or Unknow User: name from my ISP's SMTP server (free mails they provide)...

Mail LOG:

Code:

View 1 Replies View Related

Software :: Rejecting Continuously Changing Incoming Mail In Postfix?

Apr 4, 2011

I've read many post close to my subject regarding blacklisting incoming emails, but non of them described what I really want:How can I reject a continuously changing email from my postfix, here is what I mean:

abduooo+bncCIr7stnbBBCssufsBBoEzTHSKg@googlegroups.com
abduooo+bncCMfZgc-iExCKr-fsBBoEMzorbA@googlegroups.com
abduooo+bncCLf5kv6MHRCtmefsBBoEjYnAAQ@googlegroups.com

I think you got what I mean, the thing I've taken from the posts I've read is that I created a sender_access file hashed it and added the:smtpd_recipient_restrictions = check_sender_access hash:/etc/postfix/sender_accessto postfix main.cf configurationThe sender access file reads:abduooo*@googlegroups.com REJECTBut that didn't work, I know that there is some magical slashes and dots to be added to the sender_access, but I don't know which.

View 1 Replies View Related

CentOS 5 Server :: Unknown User Error With Postfix?

Mar 22, 2011

why no matter what email I send to a user I get this error relay1 postfix/local[4023]: 75941291D4: to=<username@domainname.com>, relay=local, delay=0.14, delays=0.07/0.02/0/0.05, dsn=5.1.1, status=bounced (unknown user: "username")

View 2 Replies View Related

Server :: POSTFIX - Virtual Domain And Alias Maps Results In 'unknown User'

Aug 16, 2009

I've setup postfix using mysql tables and all works except for sending to an alias. The mysql logs show that postfix is only looking at the mailbox table for where to deliver the mail for the alias. However it is not looking in the virtual alias maps table. There are no complaints from postfix on startup to indicate that there is anything wrong, and if I send to a virtual domain listed as a relay on the server it does look up the virtual alias table... even though the domain is not hosted on the server....

So the question I have is where to look next? The mysql log shows the expected lookups from postfix EXCEPT for the virtual alias map queries.... why would it not be checking the table? Since it is not looking up the virtual alias it bounces the addresses back to sender complaining that the user doesn't exist... It does deliver to a virtal mailbox, however again it never checks the vitual alias table.... so it only delivers since there's a mailbox for it rather than needing an alias...

View 2 Replies View Related

Server :: Postfix Rejecting Mails

May 17, 2011

I've enabled popb4smtp in my mail server. Is this because of the IP 117.58.246.10 don't have a dns record? How can I sending email from this type of Ip which don't have dns entry?. But if I enable SMTP auth I can send email form this same ip. Another thing is I can connect to port 587 from the email client to send email but can't connect to port 25.

View 1 Replies View Related

Server :: Server Refuses Mail With 550 5.1.1 : Recipient Address Rejected: User Unknown?

Nov 13, 2010

I'm having a problem whereby I'm able to send mail to a mailbox from several different email addresses and SMTP servers (gmail, RoadRunner broadband), but I'm unable to send mail to the same address from one particular account, the SMTP server for which runs on a mediaTemple (dv) 3.0 box with CentOS 5 Final.I've spent a full workday on the forums, trying to troubleshoot the issue, and I'm running out of ideas.The server on which I'm having the mail processing problem is a mediaTemple (ve) running Ubuntu 10.04 x64 (Linux 2.6.18-028stab070.7 #1 SMP Fri Oct 1 13:53:00 MSD 2010 x86_64 GNU/Linux), with ISPConfig 3. Here's how I setup the mail-related aspects of the Ubuntu box:

Code:
apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d

[code]....

View 2 Replies View Related

Server :: Mail Is Not Forwarding For Particular User From Postfix To Exchange

Sep 16, 2010

I have an issue in my organisation that a particular user X's mail not able to forward from my linux server MTA postfix to my second windows exchange (HUB)mail server. We use linux mail server as SMTP Gateway we have implemented fetchmail for doing this job. and its MTA is postfix OS is SUSE. Rest users mail are able to come in exchange HUB server via linux mail server. When I see that purticular user X mail in linux I am able see its spool file in /var/spool/mail and also via mail or mutt command. My question is why postix not able to forward that user X mail to our exchange HUB server.

View 120 Replies View Related

Server :: Postfix 2.6.5 Rejecting Email To All Recipients If One Recipient Is Bad?

Oct 6, 2010

I have an ubuntu server running postfix 2.6.5 (configured using DTC). If a user tries to send an email to more than one recipient, and one recipient address is bad, then the server returns an error and no mail is sent (even to the good addresses), rather than letting the good ones through. Error displayed by thunderbird is

Code:

"An error occurred while sending mail. The mail server responded: 5.1.1 [URL]: Recipient address rejected: User unknown in virtual mailbox table. Please check the message recipient noreply@domain.com.au and try again." and mail.log shows ...

Code:

Oct 6 20:35:08 www1 postfix/smtpd[22716]: connect from xxxxxx [xxx.xxx.xxx.xxx]
Oct 6 20:35:08 www1 postfix/smtpd[22716]: B62F92A44: client=xxxxxx [xxx.xxx.xxx.xxx], sasl_method=PLAIN, sasl_username=blake@domain.com.au

[code].....

View 1 Replies View Related

Software :: Postfix Server Rejecting Emails Sent From Outside Host

Jul 29, 2011

I've recently followed a guide I found online [1] and installed Postfix and Courier on my server machine. I can send emails from the server to any email address but unfortunately I can only receive emails sent from the server - it's only accepting emails sent locally from the host.

View 3 Replies View Related

Server :: Spamassassin Amavisd Reject Unknown User Before Process Mail?

Mar 23, 2010

start working with SA+Amavis+clamd+postfix+dovecot.will be my filter:spamassassin+amavisd-new+clamd. 1 Server will be my mail server: postfix+dovecot. Like u see, the emails from the outside reach first the filter, latter the mailbox. Now, I have seen in my log files, that if I receive a email to a "unknown user", the filter doesn't detect this and process the email and send it to the mail server. Exist a way to setup the filter to first check if the user exist and them apply all hard work and latter send the email to the mail server

View 3 Replies View Related

Server :: Postfix Rejecting Self-signed Cert On Remote Smtp Server?

Jun 24, 2011

I've got an uber simple test mail script in php on my awesome new dev machine running Ubuntu:

PHP Code:

Unfortunately, something is preventing mail delivery. I can't tell from this error log whether it's the remote machine rejecting me or whether it's my machine rejecting the self-signed cert on the remote machine:

Code:

I'm wondering what I could change in my postfix configuration to remedy this problem.

I tried setting smtp_tls_security_level = may = may but this did not change anything.

View 10 Replies View Related

CentOS 5 :: Postfix Mail Server Will Not Start Tried To Change Postfix Smtp Port?

Oct 4, 2010

so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens

View 7 Replies View Related

Ubuntu Servers :: Migrate Postfix Mail Server To Exchange 2010 Mail Server

Nov 3, 2010

I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?

View 1 Replies View Related

CentOS 5 Server :: Postfix And Hosts File - The Mail Server Could Not Deliver Mail

Mar 20, 2011

I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:

<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)

View 14 Replies View Related

Server :: Postfix Logs - Difference Between The Mail.log And Mail.info Files?

Jul 27, 2010

I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.

What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...

Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.

View 2 Replies View Related

Server :: Configure Postfix To Relay Mail To Multiple Internal Mail Servers With Different Domains?

Aug 6, 2010

Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.

I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.

View 2 Replies View Related

Server :: Configure Mail With Postfix & Cyrus-imap - Cannot Send Mail Through Command Line

Nov 19, 2010

I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.

[Code]....

View 9 Replies View Related

Server :: Can't Get Postfix Mail Boxes From /var/mail To ~/Maildir?

May 31, 2010

I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.

View 6 Replies View Related

Software :: Postfix - Address Verification Is Rejecting Too Much?

Mar 24, 2011

There is a mail server formed by debian4 + postfix 2.3.8 . Some messages aren't received or take too loong to be received. Here is a example or error in mail.log:

Code:
Mar 24 10:30:42 myserver postfix/smtpd[7467]: NOQUEUE: reject: RCPT from n7b.bullet.mail.re1.yahoo.com[69.147.103.218]: 450 4.1.7 <sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com>: Sender address rejected: unverified address: Address verification in progress; from=<sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com> to=<myname@mydomain.com> proto=SMTP helo=<n7b.bullet.mail.re1.yahoo.com>

[Code]...

View 5 Replies View Related

General :: Postfix Smarthost Not Relaying Mail To Exchange For One User

Sep 14, 2009

I have a RHEL 4.5 with Postfix 2.2.10 configured as a smart host for an Exchange 2003 server. Its been running well for three years like this. We have some users that are configured with alternate SMTP addresses for a secondary email domain in Exchange. One user is not getting his email for the secondary SMTP. All the others are. After some digging, the maillog indicates Postfix is not relaying his email to Exchange but to the Postfix local mail folder under /var/spool/mail. What in the configuration would cause this? His email is in the relay_recipients file as the others are.

View 1 Replies View Related

Ubuntu Servers :: Postfix Rejecting Password Protected Zip Files?

Mar 25, 2011

I recently set up a machine with Ubuntu 10.4 LTS to help to replace an aging VAX mailserver that was the DMZ mailserver for the company I work for. I set up a default install of postfix (via apt-get) to function as a DMZ border device that routes between two internal mailservers based on subdomain aliasing via internal DNS.

The problem is that although I have installed no anti-spam or anti-virus options, mail sent to this machine from any outside source containing a password-protected zip file is being rejected with error:

552 Password protected zip file found inside of the email

At first I'd thought that possibly it was the sending mailserver issuing this error, but after further testing I found that no matter the source, any password protected zip file is immediately rejected. Being as we're in a HIPAA-sensitive environment, this has been relied upon as a backup for people to do one time encrypted file sends via email. The file in question is relatively small, and I do not have any quotas on, and the same test file sent two ways (one encrypted zip and one non-encrypted zip) caused the encrypted zip only to fail.

As stated before, I do not use any type of antivirus or antispam measures, no header or body checks have been put in place, and in the course of trying to troubleshoot this problem, have probably opened my server up more than is strictly wise. I really need to enable this feature as being unable to take encrypted zips puts the entire migration at risk.

View 1 Replies View Related

General :: Debian Mail Server As A User Send A Mail With Attachment Maximum Wight Is 5 Mb

Jun 8, 2011

How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.

View 3 Replies View Related

Server :: Postfix As Spam Mailscanner To Protect Mail Server Running Sendmail?

Jul 27, 2011

I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:

<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,

[code]....

View 1 Replies View Related

Server :: Sended Mail Go To Trash Folder Of Reciver Using Postfix In Smtp Server?

Nov 26, 2010

my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.

my main.conf
sample_directory = /usr/share/doc/postfix-2.3.3/samples
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES

[code]...

View 3 Replies View Related

Server :: Basic Postfix And Dovecot Mail Server For A Test Environment?

Sep 16, 2009

I did a a basic install of postfix and dovecot instead of using courier-pop and courier-imap. This is only send and receiving e-mail locally within the test network 10.7.0.X and 10.0.0.X. I used:

[URL]

my postfix.conf is;

PHP Code:

[code]....

This is the error when I send an email from a local machine on the 10.0.0.X network.

PHP Code:

Jan 20 17:05:48 testbox postfix/smtpd[2491]: warning: Illegal address syntax from unknown[10.0.0.111] in MAIL command: <test@10.0.0.112> 

View 8 Replies View Related

SUSE :: Cannot POP Postfix Mail Server

Feb 28, 2010

Iv setup a postfix mail server.. and setup my MX records within DNS. I configured the posfix mail server with the Mail accounts.I sent the accounts a test message. They end up in the Maildir for the user. But for some reason i cannot POP the mail server from a client. I can telnet to the SMTP server.. But cannot telnet to the POP3. Iv opened the ports in the firewall correctly. and even tried disabling the Firewall but when i try to Telnet to port 110 or POP port 110 i get an error saying "connection refused"

View 1 Replies View Related

Server :: Cannot Send Mail Outside LAN With Postfix

Apr 4, 2010

My problem is that I cannot send mail with postfix. For all mail I get connection timeout Example: (delivery temporarily suspended: connect to [URL] Connection timed out)

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved