I've enabled popb4smtp in my mail server. Is this because of the IP 117.58.246.10 don't have a dns record? How can I sending email from this type of Ip which don't have dns entry?. But if I enable SMTP auth I can send email form this same ip. Another thing is I can connect to port 587 from the email client to send email but can't connect to port 25.
View 1 RepliesI have enforced to use the Linux /etc/passwd file to authenticate myself from Outlook, Postfix will accept mail from any IPs. However, I'm not able to send mails from my Outlook via my mail server to someone else on the Internet. Am seeing the following in Postfix's log.
Code:
Mar 11 21:07:39 production postfix/smtpd[16366]: connect from pcdxxxxx.netvigator.com[203.218.211.256]
Mar 11 21:07:39 production postfix/smtpd[16366]: NOQUEUE: reject: RCPT from pcdxxxxx.netvigator.com[203.218.211.256]: 554 5.7.1 <someone@hotmail.com>: Relay access denied; from=<mate@mydomain.com> to=<someone@hotmail.com> proto=ESMTP helo=<Windows>
Mar 11 21:07:42 production postfix/smtpd[16366]: disconnect from pcdxxxxx.netvigator.com[203.218.211.256]
Here are my Postfix settings.
[Code]...
I have an ubuntu server running postfix 2.6.5 (configured using DTC). If a user tries to send an email to more than one recipient, and one recipient address is bad, then the server returns an error and no mail is sent (even to the good addresses), rather than letting the good ones through. Error displayed by thunderbird is
Code:
"An error occurred while sending mail. The mail server responded: 5.1.1 [URL]: Recipient address rejected: User unknown in virtual mailbox table. Please check the message recipient noreply@domain.com.au and try again." and mail.log shows ...
Code:
Oct 6 20:35:08 www1 postfix/smtpd[22716]: connect from xxxxxx [xxx.xxx.xxx.xxx]
Oct 6 20:35:08 www1 postfix/smtpd[22716]: B62F92A44: client=xxxxxx [xxx.xxx.xxx.xxx], sasl_method=PLAIN, sasl_username=blake@domain.com.au
[code].....
I have this strange error - I switched from postfix 2.6.5 to 2.8.2 and I some mailservers cannot send mail to me. One of them was some sendmail server. I have virtual alias maps in mysql. It works fine for almost all server that are sending mail to me, but some of them seems to send mails as user@FQDN instead of user@virtualdomain my machine name is x49.tvujweb.cz, and mz email is kamil.horky@servis-it.net but in server logs is that user kamil.horky@x49.tvujweb.cz cannot be found in virtual alias maps.
here is my postconf:
Code:
2bounce_notice_recipient = postmaster
access_map_defer_code = 450
access_map_reject_code = 554
address_verify_cache_cleanup_interval = 12h
[Code]....
I've recently followed a guide I found online [1] and installed Postfix and Courier on my server machine. I can send emails from the server to any email address but unfortunately I can only receive emails sent from the server - it's only accepting emails sent locally from the host.
View 3 Replies View RelatedI've got an uber simple test mail script in php on my awesome new dev machine running Ubuntu:
PHP Code:
Unfortunately, something is preventing mail delivery. I can't tell from this error log whether it's the remote machine rejecting me or whether it's my machine rejecting the self-signed cert on the remote machine:
Code:
I'm wondering what I could change in my postfix configuration to remedy this problem.
I tried setting smtp_tls_security_level = may = may but this did not change anything.
This seems like a relatively simple question, but I haven't been able to figure it out from the documentation after a couple of hours of searching. I'm running postfix on my mail server, and the vast majority of my spam has the sender address spoofed to match the recipient address. I've got spamassassin up and running, and very little gets through that, so it's not a serious problem, but if possible I would like to be able to reject the mail before it arrives to reduce the system load.
Mail is sent locally via webmail, relaying is denied, so the only way that mail should be sent from the domain is via a connection from localhost. The basic idea I'm thinking of is if the MAIL FROM sender claims to be an address at the receiving domain, but is connected from a remote IP, the mail should be rejected.
On the postfix mailserver of our company I'm seeing several of these messages in the deferred queue (apologies for the terrible formatting, I couldn't get it any better) code...
looking at the headers, there is probably something wrong with our DNS-server, which we will investigate, but I still have some questions about the failure notice:
- why are the failure notices refused? Is that a fault on the sender side, for example sending the wrong return address?
- where does this mxcorp1.pacific.net.sg[192.169.41.21] come from anyway? I don't see it anywhere in the headers.
I have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
530 mail.domainX.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
530 mail.domainY.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
How do I make my postfix mail server auto delete mails from user mailboxes after say 1 or 2 months?
View 1 Replies View RelatedSo, I have mail server ( posfix ) and ldap server, they works fine. I can add/delete users from posfix, and they can send / receive mails to/from any address. At same time my ldap server works fine, I have also users in it, my "simple" question would be...if I have user "test1" in ldap, what I have to do to connect--enable that user to send mails ?
View 1 Replies View Relatedhow can I best transfer my mails that are sitting on my old exim server to my new postfix server?
View 1 Replies View RelatedI have configured dns, postfix, dovecot, https, squirrel mail on fedora11 everything working very well. While configuring out look the same domain users getting mails the virtual users not receiving mails it showing pop3 error. But he can able to receive mails in his home directory.
View 1 Replies View RelatedThere is a mail server formed by debian4 + postfix 2.3.8 . Some messages aren't received or take too loong to be received. Here is a example or error in mail.log:
Code:
Mar 24 10:30:42 myserver postfix/smtpd[7467]: NOQUEUE: reject: RCPT from n7b.bullet.mail.re1.yahoo.com[69.147.103.218]: 450 4.1.7 <sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com>: Sender address rejected: unverified address: Address verification in progress; from=<sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com> to=<myname@mydomain.com> proto=SMTP helo=<n7b.bullet.mail.re1.yahoo.com>
[Code]...
I recently set up a machine with Ubuntu 10.4 LTS to help to replace an aging VAX mailserver that was the DMZ mailserver for the company I work for. I set up a default install of postfix (via apt-get) to function as a DMZ border device that routes between two internal mailservers based on subdomain aliasing via internal DNS.
The problem is that although I have installed no anti-spam or anti-virus options, mail sent to this machine from any outside source containing a password-protected zip file is being rejected with error:
552 Password protected zip file found inside of the email
At first I'd thought that possibly it was the sending mailserver issuing this error, but after further testing I found that no matter the source, any password protected zip file is immediately rejected. Being as we're in a HIPAA-sensitive environment, this has been relied upon as a backup for people to do one time encrypted file sends via email. The file in question is relatively small, and I do not have any quotas on, and the same test file sent two ways (one encrypted zip and one non-encrypted zip) caused the encrypted zip only to fail.
As stated before, I do not use any type of antivirus or antispam measures, no header or body checks have been put in place, and in the course of trying to troubleshoot this problem, have probably opened my server up more than is strictly wise. I really need to enable this feature as being unable to take encrypted zips puts the entire migration at risk.
I've read many post close to my subject regarding blacklisting incoming emails, but non of them described what I really want:How can I reject a continuously changing email from my postfix, here is what I mean:
abduooo+bncCIr7stnbBBCssufsBBoEzTHSKg@googlegroups.com
abduooo+bncCMfZgc-iExCKr-fsBBoEMzorbA@googlegroups.com
abduooo+bncCLf5kv6MHRCtmefsBBoEjYnAAQ@googlegroups.com
I think you got what I mean, the thing I've taken from the posts I've read is that I created a sender_access file hashed it and added the:smtpd_recipient_restrictions = check_sender_access hash:/etc/postfix/sender_accessto postfix main.cf configurationThe sender access file reads:abduooo*@googlegroups.com REJECTBut that didn't work, I know that there is some magical slashes and dots to be added to the sender_access, but I don't know which.
can i just copy/backup postfix mail queues in /var/spool/postfix and paste that folder back in after i done migrating all users and mails to a new mailserver?
View 3 Replies View RelatedI've got a Fedora postfix server that I just upgraded from 9 to 10 using preupgrade. Starting yesterday, some messages were rejected by servers because the IP address had a poor "reputation". The odd thing is, the IP address they're registering isn't the IP address the server is sending from.
When I look at the full headers of our outgoing e-mail, the e-mail is listed as coming from ***.***.***.11, which is the correct address. But these services are somehow tying the e-mails back to ***.***.***.12, which is used for a different purpose entirely. Since this *.12 address doesn't match the MX record, I'm assuming that's why the mails are being blocked, but I'm not sure how the mails are being identified as coming from that address in the first place. It's odd that this just started when I upgraded.
I use this command to fetching mail from gmail it work good but it does not retrieved mails from server as I read from manual.
Quote:
fetchmail -d0 -F -K pop.gmail.com
What is wrong and what should I do?
I have Postfix set up to forward e-mails to two different addresses. This is my /etc/postfix/virtual:
Code:
I'm forwarding the message back to myself because that's the only way I know if the original message is even getting delivered in the first place.
The problem is that the e-mail isn't making it into my GMail inbox. I've checked my spam folder and it isn't there. And bafflingly, according to the logs, the message does seem to be getting sent:
Code:
I implemented postfix as mail gateway but i need to block the ability to send
mails via telnet
How can i achive this?
we have a Postfix mail relay server. Not to be an open relay we use check_sender_access restriction with allowed sender domains. Is there a way how to configure postfix to accept mails from any domain for a specified recipient? Something like
Code:
if (recipient_address==host@mydomain.com) accept; We have an admin mailbox and we need it to be accessible from everywhere.
Today I got a call from our chairman saying that he gets duplicate mails. When I checked the postfix logs, I found that it is the locks that are creating problems. The mail which duplicated was to an alias which included our chairman. In that alias, the mailbox of a user was locked since he was receiving his mails (I use dovecot for mail distribution), and hence the lock was on for that mailbox. When postfix tried to deliver the mails, it encountered the lock and the mail delivery was stopped, thus by requeuing the specific mail. While postfix retried the delivery, it found another lock with another mailbox and again the delivery was stopped, thus sending the mail back to queue
View 5 Replies View RelatedI have Postfix set up to forward e-mails to two different addresses. This is my /etc/postfix/virtual:
Code:
jason@woollymammothlabs.com jason@woollymammothlabs.com, jason.swett@gmail.com
I'm forwarding the message back to myself because that's the only way I know if the original message is even getting delivered in the first place.
The problem is that the e-mail isn't making it into my GMail inbox. I've checked my spam folder and it isn't there. And bafflingly, according to the logs, the message does seem to be getting sent code...
I've setup postfox on Fedora 13 in order to send emails to and from gmail. I thought this was working, but it is dropping approx 50% of mails with an error. The other 50% work OK. It seems completely random.
I've read the link but I stil dont quite understand.
My machine is just a PC, on talktalk's network in the UK.
I use dyndns to allocate a DNS alias (well several actually) to my dynamic IP address - not sure if this is relevent.
Is it failing due to a reverse DNS lookup on the dyndns host? Or is it because it cannot resolve my localhost.localdomain?
I used to have this running on opensuse and swear it used to work 100% of the time.
What am I doing wrong?
Quote:
Nov 14 18:12:40 linuxserver1 postfix/smtpd[14619]: connect from localhost.localdomain[127.0.0.1]
Nov 14 18:12:40 linuxserver1 postfix/smtpd[14619]: 367D428388: client=localhost.localdomain[127.0.0.1]
Nov 14 18:12:40 linuxserver1 postfix/cleanup[14622]: 367D428388: message-id=<20101114181240.367D428388@linuxserver1.localdomain>
Nov 14 18:12:40 linuxserver1 postfix/qmgr[2834]: 367D428388: from=<myaccount@gmail.com>, size=3309455, code....
I view my /var/log/maillog and see tons of lines like this code...
I think those are some kind of SMTP attacks from this host by I tried to block hit with Iptables but it seemes to peace them off and they keep coming...!
please some kind of postfix-configuration solution?
I'm facing the best problem which I ever had, where is the previous vendor don't do any documentation. So my task actually do some enhancement on the filtering solution actually, but what I found out is like this..
here my cat /var/log/maillog
Jan 31 09:47:02 mws postfix/cleanup[11028]: 998464290DB: hold: header Received: from mail.jkm.gov.my (webmail.jkm.gov.my [10.0.223.2])??by webmail.jkm.gov.my (Postfix) with ESMTP id 998464290DB??for <hidzuan@gmail.com>; Mon, 31 Jan 2011 09:47:02 +0800 (MYT) from webmail.jkm.gov.my[10.0.223.2]; from=<e1@jkm.gov.my> to=<hidzuan@gmail.com> proto=ESMTP helo=<mail.jkm.gov.my>
[Code].....
is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View Relatedso i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View RelatedI recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.