Debian :: E - Can't Perform Immediate Configuration On 'perl'?
Aug 24, 2011
I'm getting the following error when I'm trying to install from 'testing' repo. E: Could not perform immediate configuration on 'perl' I'm doing apt pinning to install XFCE 4.8 on Squeeze. I've already added all the necessary sources and my /etc/apt/preferences file looks like this.
Package: *
Pin: release a=testing
Pin-Priority: 400
Package: *
Pin: release a=unstable
Pin-Priority: 300
Here is what I'm trying to install.
I am on a friend's box and we are atm transitioning from stable to sid on his box. Instead of doing the whole thing at one shot via update-manager we are doing it using the apt tools. Now while upgrading, I'm not able to update any of the perl 5.12 packages, perhaps due to circular dependencies or what. This is the error I'm seeing :-
while trying to get a game to work on wine I was surprised to find out that the wine version that ships with sid is 1.0.1 released in October 2005. So I installed the latest release I found at [URL] like this :
dpkg -i wine_1.1.42~winehq1-1_amd64.deb
The install failed, I think because I hadn't remove the old wine version, and that's when the joy-ride started. Impossible to remove wine to restart properly. (apt-get remove libwine wine and apt-get -f install didn't) After some googling I tried this :
This did install the wine version I wanted, and the game ran fine after that. However the result was a borked apt-get. Tried to remove wine again with the above commands, resulting in apt-get failing to do so because it tried installing wine-unstable and reported errors similar to these : E: Could not perform immediate configuration on 'wine-unstable'. see man 5 apt.conf under APT::Immediate-Configure for details. (2)
i use synaptic manager to get the updates. I tried to get the required plugins like gstreamer 0.10 plugins bad. I downloads the all the required files but at last it show the following
E: Internal Error, Could not perform immediate configuration (2) on mountall
I ran into this problem myself, and I've seen that others have had the same problem when updating from Karmic to Lucid via apt-get. There is a bug in apt for Lucid, and it has been noted on one of the Ubuntu lists
This is a simple how-to and a work-around to the upgrading with apt-get:
1) Update your sources.list file to replace all instances of 'karmic" to 'lucid' : $ sudo sed -i 's/karmic/lucid/g' /etc/apt/sources.list
2) Run apt-get update: $ sudo apt-get update
3) Run a regular upgrade; $ sudo apt-get upgrade -y
Here is where the problem comes in. Apt is looking for the util-linux package, which is part of upstart-job, but someone apparenlty forgot to write the code to tell apt-about this (whoops!)
So, you now need to install upstart-job by itself. By skipping this step you will get the error message when you try to run step 5: "E: Could not perform immediate configuration on 'util-linux'.Please see man 5 apt"
4) $ sudo apt-get install upstart-job
5) Now you can run apt-get dist-upgrade: $ sudo apt-get dist-upgrade -y
I have been having trouble installing packages. Every package I try to install gives me the same error - Quote: E: Could not perform immediate configuration on 'libattr1'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2)
I have tried Synaptic, the Update Manager, apt-get, and aptitude. I noticed that someone has filed a bug report on launchpad (link), for seemingly the same reason, and so far there hasn't been any changes made.
i recently got a server and it was going fantastically well, but just recently when i tried installing something using apt-get install .... ( i tried irssi, firefox/iceweseal, tightvncserver) it downloads asks for a questions i press y for yess then i get this error E: Internal Error, Could not perform immediate configuration (2) on mountall and then it doesnt install, this is really frustrating.
I did an unsuccessful update and got a lock un apt. But instead of removing /var/lib/dpkg/lock, i by accident removed /var/lib/dpkg. Yes, i don`t have backups, and i regret it very much now. I created a new /var/lib/dpkg folder but now if i do a apt-get upgrade, it tries to install all applications, because apt thinks i dont have any. Any chance to rebuild the database? Also, if i hit "yes" and try to reinstall them all, i get this error message:
Code: "E: Could not perform immediate configuration on 'multiarch-support'. Please see man 5 apt.conf under APT::Immediate-Configure for details. (2)"
I have a couple of Lenny LAMP servers, and a backup server. (virtual testing environment)
1. What is the best way to perform a backup? (system state as well as individual files) Although system state can also be accomplished through the hypervisor.
2. Between Windows computers, I access shared directories simply by \hostnamesharedmap or \host_IPsharedmap. Between Windows and linux i use SAMBA. But there must be a simple way to copy 2 files between linux hosts?
3. I've searched a lot, and only found people with the same question without a good answer: is there a linux equivalent for robocopy?
How do we perform offline patch management with Debian? This isn't a question about which tools to use on Debian to load the patch once it is on a CD and transferred to said offline computer via sneaker net. More, how do I keep said offline (or strictly firewalled) computer in synch?
Pardon me while I make a comparison to Solaris. I am in no way stating Solaris is better. It just happens to be my baseline of experience.In Solaris, I can download Cluster Patch Updates (CPU). So if I build a Solaris box with a CD that is a year or more old, I can download the latest CPU and get the box patched up to date, and from that point on sneaker-net patches as they appear.
I am using debian 5.04 + LXDE. In the past, I sometime encounter problems such as the distro broken after performed a full apt dist-upgrade or upgrade. Now, I am more conservative, I am using apt safe-upgrade.
I want to know are there anyway to do a better safe upgrade for debian without breaking the distro?
I want to learn perl CGI. I tried to configure it on apache server. But when I was searching about it in the net, I faced some difficulties. Each and every post has been leaded me in different way. I am confused now. I have done this,
1. Installed this libapache2-mod-perl2 module
2. Then I checked the /etc/apache2/mods-available/ using ls command for checking the module availability.Here I mentioned the output of ls command.
Very new to Ubuntu (linux) in general and read various forum and threads to get .pl file to run on a new Ubuntu 9.10.My cgi-bin is in /var/www/site/cgi-bin. The server will run 2 websites site1 and site 2. Site2 is html only and site1 has some cgi and pl files. Everytime i get to the cgi-bin/other_director the browser tries download the file or even if going directly to index.pl. Please find attached my site-available for both default and site1 for your consideration. I also ran a2ensite site1 and a2ensite site2, the reloaded the apache2 serverQuote:
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
Many software available for patch managment like OCSinventry, cfengine,puppet,redhat satellite server for linux. I want to perform patch management for my Linux server (centOS, debian) My question is how to find out which patches available for Linux and which patches i need to apply. Is there any way to find out require patches?
I am new here and want to lern CentOS. Current I have installed CentOS 5.5 x64 and Perl 5.8.8. Now i have install Perl 5.12.1 which located to /usr/local/bin/perl. But how I can move it to /usr/bin/perl so root based on Perl 5.12.1?
I recently reinstalled the B module for perl. Now I found out it didn't just do that, it installed a whole new copy of perl into /usr/local/bin/perl. When I type 'which perl' at the terminal, it says '/usr/local/bin/perl' instead of '/usr/bin/perl'. Normally, this wouldn't bother me. But I installed the one in local/bin without threading support. The one that comes with the system already is build with threading support, which is why I want to switch back to the system perl, and possibly remove the one in /usr/local/bin.
So how do I change it so that the result of 'which perl' returns as '/usr/bin/perl'? And what do I have to do to remove /usr/local/bin/perl?
The reason I need threading support is because I'm designing a file copier that copies several chunks of a file simultaneously to speed up the copying process. Guaranteed a useful script if it works.
I'm new in perl programming and linux OS. What is the difference between perl and perl-devel? What does mean devel? Iwant to install Catalyst and before install as required I have to check if make, gcc and perl-devel are installed in my system. make and gcc are installed. But I have to install perl-devel. First I searched for make, gcc and perl-devel in YAST Software Management and search did not find perl-devel. I visited the software.opensuse.org and wrote "perl-devel" and searched. The result was many similar zips with a prefix perl-devel and I can not choose one for needed perl-devel.
I'd like to build a .deb file which will contain my Perl program. I just want it to be deployed with dpkg -i on debian systems later. So it's just a matter of having the good arborescence in my .deb package. For that purpose, in the debian/rules file, I'm declaring some dh_install lines in the install rule.
My issue is that I know how to achieve my goal, but only with writing a ton of dh_install lines (one line, for one file...)
example : clean: dh_testdir dh_clean install: build
I'm trying to write a Perl script that will convert text to ASCII. I'm particularly interested in converting files created with MS Windows, so I used Notepad to create a few test files.
I have had some success with the following script: [[ Script Deleted -- see subsequent posts ]]
After coming back /home/ to Debian, I used file to examine the file types: $ file ansi.txt unicode_big-endian.txt unicode.txt utf8.txt ansi.txt: ASCII text, with CRLF line terminators unicode_big-endian.txt: Big-endian UTF-16 Unicode character data, with CRLF line terminators unicode.txt: Little-endian UTF-16 Unicode character data, with CRLF, CR line terminators utf8.txt: UTF-8 Unicode (with BOM) text, with CRLF line terminators
Everything appears good: $ file new_ansi.txt new_unicode_big-endian.txt new_unicode.txt new_utf8.txt new_ansi.txt: ASCII text new_unicode_big-endian.txt: ASCII text new_unicode.txt: ASCII text new_utf8.txt: ASCII text
But the "little-endian file" does not convert properly: $ md5sum new_ansi.txt new_unicode_big-endian.txt new_unicode.txt new_utf8.txt c4def7932bc151b9e786b6ca1299162c new_ansi.txt c4def7932bc151b9e786b6ca1299162c new_unicode_big-endian.txt 5b62a013dced4f2c2c0af45ea6388c1e new_unicode.txt c4def7932bc151b9e786b6ca1299162c new_utf8.txt
When I use cat to print the new_unicode.txt file in an Emacs terminal, a ^@ appears on the last (empty) line. When I open the new_unicode.txt with KWrite, a warning message tells me that the file is a "binary" and "saving it will result in a corrupt file."
I have a directory of orchestral music .ogg files from a family member. Each track is from a different artist and the CDDB entry adds a ":" character after the artist name in the track title.
I would like to parse file names in any given directory and search for the string Code: Select all: and replace it with Code: Select all_ According to this post on stackoverflow, I can use Perl to accomplish this task. I've tried Code: Select allperl -i.bak -pe 's/:/_/' but since I am still learning Perl I'm probably commiting a PEBKAC error.
How would I go about solving this issue with regular expressions using Perl?
As I mentioned on another thread, I have 2 Ubuntus - Jaunty and Meerkat - as separate drives on my secondary IDE channel. I am removing Jaunty. Meerkat blows it away. And is certainly my preferred OS. However I am looking for a replacement for Jaunty that is more flexible in certain key areas than Ubuntu appears to be.I dont want to be restricted to Debian versions of things like Perl, MySQL, PHP and others. I can run LAMPP, but I would prefer to compile and have the versions of my choice as part of a main test system (apart from Meerkat that is).
I have had enough nightmares in Jaunty with things getting broken and spiralling out of control. I want a distro that doesnt rely on the GUI and its attendant utilities, but can run them when called. Meerkat is stable and has resisted me breaking it so far, but I do not want to push my luck. I have too much time invested in it. I intend to use Meerkat as my primary system on the machine, but want an alternative to *PLAY* with.
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
