Please what will it take me to write a perl full functioning program to filter emails for specific rules? Will that be possible? The actual thing am trying to get is to write a perl program and attach to a mail server so that, when the mails come in, the perl script get call and then the perl program will let another external program that is not on the server run and check or filter the mails.
View 8 RepliesI want a mail server that can work just like MDaemon. The reason is, I want to have an email content filter rule that does some thing like this.
1. If the To Header contains "support@thisdomain" then run a program.
What this means is that, there is a program here in the office, and if some one sends an email to the support address, with an attachment of .exe and that person is a customer, then the program should be run. The only thing I need here is if there is a rule or script that can filter email header and run a program.
2. If the Exit Code from a previous 'Run program' rule is in the range of 1 to 100 and if the To Header contains "support@thisdomain" then send note1 "to<email address>" from <$SENDER$" "SUBJECT <AM ...>
and delete this message.
3. If the EXIT CODE from a previous 'Run program' rule is =0 and if the TO HEADER contains "support@thisdomain" then send note1 "to<email address>" from <$SENDER$" "SUBJECT <AM ...>
and delete this message.
I've been looking for a way to filter out emails on my postfix server by GeoIP data. I couldn't find anything that fitted the bill so wrote my own in Python as a postfix policy. Thought I'd post it here to see if it's of any use to anyone else. I've attached a tar of the files as the Python formatting will get mucked up by the forum code. Comments/improvements are welcome (be kind ) First file is : policyd-geoip which is owned by root:root and placed in /usr/bin with 755 perms
[Code]...
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
I'm running Thunderbird 3.0.6 on openSUSE 11.2 (x86_64). When I add a message filter rule, it disappears upon restart. This behavior is reproducible at all times. I suspected a write permission issue, but I checked permissions for the file msgFilterRules.dat and it is rwx for the owner.
View 4 Replies View RelatedI want to read my emails locally using Evolution & Thunderbird or some other mail client. I have bought a new domain and would want incoming emails sent to this domain ids to be scanned by a virus scanner & spam filter.I have read that MailScanner + SpamAssasin is a good combination/option. Are there any others for my requirement.I am not a Linux/Ubuntu expert - so a detailed step by step tutorial to set this up is what i am looking for.I am using Ubuntu 10.04 home user.
View 2 Replies View RelatedI would like to ask if there's a program that can archive all emails from my employees to a certain server and can generate reports. specifically all types of emails incoming and outgoing. My employees are aware of my policy due to many confidential files within our office.
View 1 Replies View RelatedI am running a basic squid + privoxy combo for web caching/filtering proxy and it works fine. I'm basically running a stock config w/ a few minor edits to allow the relevant hosts access etc.now I am trying to find an easy way to specify privoxy to not filter a specific site (which it breaks). I have tried wading through the privoxy manual + google but I find the config file incredibly complicated. Are there any experts out there who can tell me: what is the easiest way to tell privoxy to 'pass through' a specific website?
View 2 Replies View RelatedI'm working on a new conky script, and I had the idea to use text from a [URL]... The command I'm using to pull the file is:
Code:
curl -s http://www.thefuckingweather.com/?zipcode=33186 | grep 'ITS FKING *'
However, this gives me the entire line of code this line appears in.
Code:
<br />ITS FKCING NICE</div><div id="remark"><br />
How can I limit this to simply the text?
Sorry about the foul language btw...the words obviously aren't misspelled when I enter them in the terminal
can I deny the access to my server for a specific OS? I have one PC which I want to give it acces from winxp, but if it's boot into ubuntu I want to deny all access to my server, same IP, same ethernet card
View 8 Replies View RelatedIs it possible to apply a rule to a specific local IP? For example lets say I have a two IP's assigned to my server, 1.1.1.1 and 2.2.2.2.;.I want to deny all connections going to 1.1.1.1 only asides from a couple of trusted IP's I will define.
View 1 Replies View RelatedI'm fairly new to Perl and regular expressions. I have a large collection of files with their file names in the following general format: string - another string with spaces (2004) [year].ext I would like to know how I could create a regex to separate out:
the first string
another string with spaces
year
extension
If you know of a better way of doing it without regular expressions, I would be happy to hear that way too.
What is a good IP filter/firewall program? Seeing as how I like free softwares, I download a lot of torrents. When I was using Windows, I used PeerBlock (the newer fork of PeerGuardian), however, it's not available for Linux. What would be a good alternative for this in Linux? I tried iplist as it has a GUI, and it was extremely buggy and blocked random web pages even after I put them on the exceptions list. And MoBlock has no GUI from I understand, nor has it been updated in years.
View 9 Replies View RelatedI am new here and want to lern CentOS. Current I have installed CentOS 5.5 x64 and Perl 5.8.8. Now i have install Perl 5.12.1 which located to /usr/local/bin/perl. But how I can move it to /usr/bin/perl so root based on Perl 5.12.1?
View 7 Replies View RelatedI am tryng to get values BBA 204- BBA 324 from a log file.
this is my script:
zmore log.gz | perl -nle 'print for m/BBAs[2|3][0-9][0-4]/g' | sort -u | perl -ne 'print if /^BBAs204$/../^BBAs324$/'
the first perl one liner gives me everything from BBA 200 to BBA 394, and the second perl one liner cuts it down to BBA 204 to BBA 324
Is there a elegant regex that will allow me to skip the second perl one liner and just take out the BBA 204 - BBA 324
I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
View 12 Replies View RelatedNormally I just use the backup feature in evolution but how would I go about saving my emails if I wanted to import them into another email program?I am going to install Mint 9 KDE on a separate partition and I have found evolution does not play nicely in KDE so was hoping there was a way of importing my evolution mail into Mints KDE email program.
View 3 Replies View RelatedI'm trying to configure our mail server to block email from a specific sender reaching a specific recipient. In other words, if one of our employees is getting harassed by a 'stalker', how would one go about blocking, at the MTA (Sendmail) level, a specific sender email address from reaching a particular users inbox? We do not want to capture the email - simply block it before it consumes server resources.The Sendmail server (MTA) is a front end to our Exchange server so no user accounts exist on the Linux server. We simply use it as a SPAM and Virus scanner then forward clean email to the Exchange server.
View 6 Replies View RelatedI am unable to run perl-cgi script in my cent os Apache server. I have used locate perl command in terminal window and it gives following result:
[code]....
tell which is the path to perl for example "usr/bin perl"
I'd like to build a .deb file which will contain my Perl program. I just want it to be deployed with dpkg -i on debian systems later. So it's just a matter of having the good arborescence in my .deb package. For that purpose, in the debian/rules file, I'm declaring some dh_install lines in the install rule.
My issue is that I know how to achieve my goal, but only with writing a ton of dh_install lines (one line, for one file...)
example :
clean:
dh_testdir
dh_clean
install: build
[Code].....
I am very much interested in Postgres db.
I have installed the DBI and DBD drivers.
Created the Tables.
Can any one help me ..how to access POSTGRES through a PERL program.
I configure squid to work with squidGuard , and all thing work properly , but there is problemfirst look to this squidGuard.confdhhome /usr/local/squidGuard/dblogdir /usr/local/squidGuard/log
src blacklist {
ip 10.0.0.5
}
[code]...
I am trying to write to the parallel port pins from a Perl program running Ubuntu Linux, to light up led's on a bread board. I've already accomplished this on this same box using a C program, but I cannot get my code below to work. I believe the problem is with the line:
$parport = Device::ParallelPort->new('auto:0');
I've tried different variables between the ('') ticks, but nothing has worked. I use Perl on my web pages for forms, but this has stumped me.
Code is below:
#!/usr/bin/perl require "subparseform.lib"; &Parse_Form; print "Set-cookie:
cart_id=1234; user_id=123;
"; print "Content-type: text/html
"; use strict; use CGI; use Device::ParallelPort;
# use Device::ParallelPort::drv; # use Device::ParallelPort::drv::linux # use Device::ParallelPort::drv::parport
# Set up your parallel port object and tell it what driver to use.
#my $parport = Device::ParallelPort->new('auto:0'); print "It works!!!";
I need to create filename 70-android.rules in the directory /etc/udev/rules.d/I have Adm privileges in my user account properties, but when I use sudo to create this file the Ubuntu OS does not allow me the privilege... I am running Ubuntu 10.04 LTS and here's the Terminal output below:daddy@gatomon-laptop:/etc/udev/rules.d$ sudo cat > 70-android.rulesbash: 70-android.rules: Permission denieddaddy@gatomon-laptop:/etc/udev$ ls -ltotal 8drwxr-xr-x 2 root root 4096 2011-03-16 18:03 rules.d-rw-r--r-- 1 root root 218 2010-04-19 04:30 udev.conf
View 2 Replies View RelatedI use the below perl program csv2xls.pl can convert a csv to xls file , it works fine , but I found that it only work for all English characters , I tried to use it to convert a csv file ( with Japanese characters ) , it does work , I also tried the perl "unicode_utf16_japan.pl" , it also did not work , can advise what can i do ?
View 13 Replies View Relatedwhat distro do you recomend to use creat a server to filter and cacheall internet activity?
this is for a cybercafe each pc will have some restritions others not
We have a CentOS server which has beed restarted due to some reason. Now we have ping to the server and we can reboot it via KVM, but the server loads to some messaageThis is filter.unknown_domain (Linux ...)Filter Login:and then it stops. Do you have an idea what might be the problem and how can we fix it?
View 2 Replies View RelatedCan I set up my system to use a specific processor to do one task, and another processor for normal applications.
Say for example, I'm using a program that relies heavily on your processor, I have a dual core, so I can use one core for that, and another for normal applications.
I installed Perl Audio Converter, The system recognizes the install, When I type perl in the terminal it says "Perl is already the newest version" And the perl files appear in my "bin" directory, However the program does not appear in the menu, Is this a common problem?, How do I fix it?
View 1 Replies View RelatedOne thing I have had to do to launch Maya every time is disable SELinux.
echo 0 >/selinux/enforce
I type that each time before I launch maya. If I don't it wont start.
Not sure why. Essentially it makes it so I need to be su to run maya.
If I was setting up the workstation to be used by others as well how would I disable SELinux just for starting Maya but nothing else? Or how to do I tell SELinux maya is ok for regular users to run?