I'm running Thunderbird 3.0.6 on openSUSE 11.2 (x86_64). When I add a message filter rule, it disappears upon restart. This behavior is reproducible at all times. I suspected a write permission issue, but I checked permissions for the file msgFilterRules.dat and it is rwx for the owner.
View 4 RepliesI want a mail server that can work just like MDaemon. The reason is, I want to have an email content filter rule that does some thing like this.
1. If the To Header contains "support@thisdomain" then run a program.
What this means is that, there is a program here in the office, and if some one sends an email to the support address, with an attachment of .exe and that person is a customer, then the program should be run. The only thing I need here is if there is a rule or script that can filter email header and run a program.
2. If the Exit Code from a previous 'Run program' rule is in the range of 1 to 100 and if the To Header contains "support@thisdomain" then send note1 "to<email address>" from <$SENDER$" "SUBJECT <AM ...>
and delete this message.
3. If the EXIT CODE from a previous 'Run program' rule is =0 and if the TO HEADER contains "support@thisdomain" then send note1 "to<email address>" from <$SENDER$" "SUBJECT <AM ...>
and delete this message.
Please what will it take me to write a perl full functioning program to filter emails for specific rules? Will that be possible? The actual thing am trying to get is to write a perl program and attach to a mail server so that, when the mails come in, the perl script get call and then the perl program will let another external program that is not on the server run and check or filter the mails.
View 8 Replies View RelatedDoes anyone know why firefox and thunderbird menus occasionally disappear from the global menu in unity. This makes impossible to click on buttons for properties and addons
View 1 Replies View RelatedI need to create filename 70-android.rules in the directory /etc/udev/rules.d/I have Adm privileges in my user account properties, but when I use sudo to create this file the Ubuntu OS does not allow me the privilege... I am running Ubuntu 10.04 LTS and here's the Terminal output below:daddy@gatomon-laptop:/etc/udev/rules.d$ sudo cat > 70-android.rulesbash: 70-android.rules: Permission denieddaddy@gatomon-laptop:/etc/udev$ ls -ltotal 8drwxr-xr-x 2 root root 4096 2011-03-16 18:03 rules.d-rw-r--r-- 1 root root 218 2010-04-19 04:30 udev.conf
View 2 Replies View RelatedI have installed 11.4, and it seems (seemed) to work OK so far. I installed Thunderbird via the opensuse "1 click install". the installation ran smoothly, but now a click on the Thunderbird icon does not activate any mail client; the only success is that Thunderbird icon jumps joyfully and then disappears.
View 9 Replies View RelatedI'm a KDE fan, but I installed GNOME 3 to give it a test drive. I like some aspects, but I don't care for all the clutter in the menu, in the form of KDE apps that duplicate the functions of native GNOME apps. So I just opened alacarte and un-checked all those KDE apps. Simple, cleaned up the menu beautifully. Then I booted into my main environment, right-clicked on my launcher to open its editor and delete the GNOME apps. All of my KDE apps were gone!
Deleting GNOME apps from KDE works fine: They stay gone in KDE but they're still present in GNOME. The reverse is not true. Is there a better way than what I tried? Besides installing a GNOME distro in a vbox; I tried that and found it too sluggish. I could also replicate a menu structure on a dock (Cairo), but I thought I'd check with the experts first in case there's a less clunky approach.
I want to install l7-filter application on my opensuse 11.3 . I couldn't install it alone according to this guide :
Layer 7 Userspace HOWTO
the download link is :
Linux layer 7 packet classifier - Browse Files at SourceForge.net
Kmail is crashing on me when trying to create a new filter. Both ways it crashes:
1) Right click on message -> Create Filter -> Filter on From
2) Settings -> Configure Filters.
I'm running KDE 4.4.3-160.1.
[Code]...
Is l7-filter support available in opensuse 11.3? When running a shaper script I get the following:
Code:
iptables v1.4.8: Couldn't load match `layer7':/usr/lib/xtables/libipt_layer7.so:
cannot open shared object file: No such file or directory
I have the xtables addons installed. Any ideas where I can obtain the missing library?
I mount a smb share in suse 11.2 like so mount //ip/share /mnt/point That's fine. It works. A few days later I find all shares I've mounted like that have mysteriously disappeared. I can't find out why, nothing in logs, no obvious causes. When I say disappear I mean its like something did an umount /mnt/point. They no longer appear in the mount list, they are no longer mounted, and I need to type in the mount command for them to come back.
I tend to leave the boxes running until they crash or need a reboot, and always have. This problem I've only seen in 11.2. I have a 11.1 and 11.0 boxes running too, and the mounts are stable on those. I can't find any references anywhere to this behaviour.
I've installed Visualboy advance on OpenSuse 11.2 and it is no where to be found. YaSt says its installed but it is not in kick-off or when using run application. In Kick-off the computer section that has yast and run command and another app. YaSt and the other app (I can't remember what it was) have disappeared and only run command is left.
View 9 Replies View RelatedWhenever I start Desktop Activity Settings by shortcut or right clicking the desktop KDE window interface disappears all together showing only a black screen. Applications there were running continue to run. Is there a way I can 'reset' the KDE config?
View 2 Replies View RelatedI don't know how, but from onw time to another the menu of the gwenview application disappear. I don't know how to bring it back.
View 3 Replies View RelatedI recently download the new 11.3 suse. I Install from the cd, and choose the update option to make it all auto-.Now I Found out that I have no Mozilla repository, Packman repository, OpenOffice one, as well as others. Then I go the repositories packages screen that repositories aren't displayed. Where can I found them ?What's new on this website that take those repositories apart ?
View 3 Replies View RelatedThe Linux Wacom Project It says that"December 15, 2009 - Updated serial Tablet PCs support. Added 5 new Bamboo tablets support. - kernel patch submitted by K Gingerich. - xorg by Enrico Ros <enrico.ros@gmail.com. Label 0.8.5-7½. So I install the newest driver(0.8.5-8.1.x86_64) in the opensuse 11.1 x64 from the opensuse.com,but my bamboo pen doesn't work.I run "wacomcpl",there is no device to choose. then I open the file " etcudev ules.d60-wacom.rules":
[Code]...
The idprodut of the Bamboo pen CTL-460 is 00d4, I can't find it in this file. Can this driver support the bamboo pen
can I deny the access to my server for a specific OS? I have one PC which I want to give it acces from winxp, but if it's boot into ubuntu I want to deny all access to my server, same IP, same ethernet card
View 8 Replies View RelatedSo I've been testing Gnome Do and I now want to activate docky. To do that I have to activate the desktop effects, so I installed drivers for my graphics card which work fine. But I have an infamous issue with my compiz which causes all title bars of windows to disappear. Is there a solution in which I can activate docky and still have my title bars?
View 1 Replies View RelatedI have trouble when typing in Open Office Writer, Kmail, and zim, among other applications. It's not due to unintentional use of the 'insert' key, either.When I type in these applications, the word I am typing often disappears entirely if I don't add a space, return, or punctuation at the end of the word, or use the arrow keys. For example, when setting up a profile in Kmail, I typed my email address into the settings dialog box, and it kept removing the last part of the address: "myname@univ.edu" would always become "myname@univ." unless I added a space after the edu.
When I first encountered this behavior, in Writer, I thought it was a bug with the AutoComplete feature. But now that I've seen it in other applications, I think it is something more general. how to stop the unexpectedly deletion of words while typing?
I set up a squid transparent proxy and I have a problem with an iptable rules. I have a rule to redirect all request to port 80 to go on port 3128. To do so, I'm using this iptables command :
Code:
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128
This command is working like a charm. The only problem is, for some unknown reasons, this rule will be dropped at some point. I did not manage to identify what is causing this to happen. It occurs during night, but I have nothing about that in my log files. messages / firewall / ...) The only way I managed to reproduce this 'dropping' is this one: I type the command like as root. The command is effective and working fine. I open yast, I go to the firewall module, the I do a simple "save changes and restart firewall" (without changing anything). As soon as this process is finished, the iptables rule is gone.
-How can I make this rule permanent ?
-Is there a place where I can launch a script executing this rule, after the yast firewall module is 'touched' or something ?
Wondering if any one else is having this problem lately under 11.4. My Skype does not want to launch any more. When I click to open Skype, the tray icon will pop up for 1 second and then just disappear. Have tried launching from command line to see if there are any messages, but it just says aborted when you try launch it.
I noticed this started happening randomly when I had the laptop in hibernate and then would resume, Skype would then just disappear and then I would just relaunch it and it would be find again.
I need assistance with my Snort Installation. I used Bodhi Zazen's Network Intrusion Detection System post and found it easier than the previous time I had done it. I am currently running Ubuntu 10.04 server and Snort 2.8.6.1 with BASE 1.4.5. I followed Bodhi Zazen's instructions and when I tested snort it ended with a Fatal Error due to ERROR: /etc/snort/rules/exploit.rules(264) => 'fast_pattern' does not take an argument
Fatal Error, Quitting.. Here is the entire output once I ran the test command: snort -c /etc/snort/snort.con -T Running in Test mode
[Code]...
I have problem with VLC player. The problem, from the image below, appears whenever I open video file. I click Ok, and a everything is ok, until I jump to another time sequence, when sound and subtitles disappear.
Terminal log:
In the not so distant past, I was able to hide arrays/encrypted arrays from nautilus with udev rules as follows:
Code:
## HIDE Encrypted "dm" partitions from nautilus
SUBSYSTEM=="block", KERNEL=="dm-*", ENV{ID_FS_USAGE}=="crypto", ENV{DKD_PRESENTATION_HIDE}="1"
[Code].....
This worked in OpenSUSE 11.2; it does not work in either FC13 or OS11.3
I have trouble with opensuse susefirewall 2 and my own rules. since i have installed a suspicious download manager, i detect outgoing traffic in the monitor and i want to block ougoing traffic except some apps like firefox, jinchess ...
1) I had to modify FW_CUSTOMRULES="" with FW_CUSTOMRULES="/etc/sysconfig/scripts/SuSEfirewall2-custom" in /etc/sysconfig/SuSefirewall2
2) I had to add my own rules in /etc/sysconfig/scripts/SuSEfirewall2-custom in the appropriate hook
3) I don't know if rules are good.. they seem to work because for example jinchess can't access his server with the DROP rule until i add the ACCEPT rule BUT in fact the download manager still access internet and amarok too when it searches for songs lyrics ! i have discovered it's because the others apps use port 80
I give here the file /etc/sysconfig/scripts/SuSEfirewall2-custom
How to to make firefox use another specified port ? i wanted to use privoxy with tor but it doesn't work .. is there input/output controler on linux (something like zonealarm on XP) ? the trouble is that all outgoing traffic is permitted by default!
I had a portable apps version of Thunderbird (windows) that runs off a thumb drive and wanted to take the settings and transfer them to my Thunderbird that's on my Linux computer.
This is what I did:
First, I installed thunderbird on my Ubuntu 10.04 Linux box and opened it, and closed it (so that it would create the /home/<username>/.thunderbird folder in the user account).
Then, I renamed the linux /home/<username>/.thunderbird folder to .thunderbird_ORIGINAL
Then, I created a new /home/<username>/.thunderbird folder
Then, I took the windows e:ThunderbirdPortableDataprofile folder and copied it to the /home/<username>/.thunderbird folder.
Then, I looked into the /home/<username>/.thunderbird_ORIGINAL folder and wrote down the name of the folder with the ".default" extension.
Then, I renamed the profile folder (that came from the windows e:ThunderbirdPortableData folder) "<name-I-wrote-down>.default".
And then, I copied the profiles.ini folder from /home/<username>/.thunderbird_ORIGINAL to the /home/<username>/.thunderbird folder.
I opened up Thunderbird in Linux and everything seems fine! (I'll definitely be keeping a backup just in case)
My question is: is this fine and dandy, or a recipe for disaster?
Thanks to Lucid not working properly on i845, i855 and other 8xx chips, had to re-install Karmic on my mum's computer.I saved all the data from her old install and I ve managed to get all her old emails from thunderbird, but I cant import her address book.In Thunderbird/tools/import/addressbooks it only allows importing of LDIF, .tab, .csv and .txt files, but I cant find any of these files in any of the Thunderbird, .Thunderbird, Mozilla-Thunderbird or Mozilla folders in Home folder or anywhere, all I can find is "abook.mab" which IS supposed to be her address book, but when I try and import it the entries are blank and/or indecipherable (prob cos not a compatible file type).
Its one of those "simple" things to do, thats taken hours and hours of time, but that I cant actually find out how to do.
Both Firefox and SeaMonkey have updated to the most recent versions of FF 3.6.16 and SM 2.0.13. In fact SM updated to a more recent 2.0.13 version today.
Thunderbird 3.1.9 was released the same day and has yet to show up in the repository I have for Mozilla which is Index of /repositories/mozilla/openSUSE_11.3
Any idea when this version will be available?
This is a fresh install of 11.2 KDE-4.3.1.
After reviewing all of the 11.2 Milestone 64-bit DVDs, Milestone 1 - 8 - I was always able to launch Firefox from Thunderbird in search of add-ons or an html link.
It stopped working in RC1, RC2.
I thought this was resolved for openSUSE 11.2. The problem still exists!
Now, thinking the problem was with Thunderbird 3.0.4b. I navigated to Configure Desktop --> Personal Settings --> General --> Default Applications:
Changed Email Client from KMail to Thunderbird
From within KMail I can launch Firefox. However, Thunderbird 3.0.4b does NOT launch Konqueror nor Firefox 3.5.4 !!
In addition the Thunderbird 3.04b Help does NOT work.
Could the setting of Default Applications be broken in KDE-4.3.1 " release 6 " ??
I'm sure I cannot be the only one experiencing this at home???
at my work we have upgraded suse to 11.2, thus we also got an upgrade of thunderbird 2 to 3.
When I now save attachments to our network disks it writes them as user=rw (600), and no longer as 644. I do not want to do chmod for every attachment.When creating a file by csh or bash terminal or downloading a file by firefox it does write the file as 644, which is good.
Can someone please give me a suggestion of how I can solve this problem? Is there something I have to change in the prefs.js file?