Server :: Need Info On Ovzkernel-PAE 2.6.18-53 Package For RHEL 5 2.6.18-53 Server
May 24, 2010
I have a RHEL 5 server with 32 bit architechture that is not recognizing more that 4 GB of RAM and I am trying to locate a version of the kernel-PAE package that will work well with the 2.6.18-53 kernel. I found something on Open VZ called ovzkernel-PAE that is built for the 2.6.18-53 kernel [URL]
and wanted to find out if there were any known issues with this release before I attempted to install it. Is anyone aware of any issues with any rpms on openvz.org or with this particular rpm in general?
View 1 Replies
ADVERTISEMENT
May 6, 2011
find and install EXPECT package in RHEL5 to TELNET servers.
View 2 Replies
View Related
Mar 2, 2011
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies
View Related
Feb 1, 2011
We are planning to migrate our LINUX server from RHEL 3to RHEL 5. What are the configuration difference between RHEL 3 to RHEL 5 for webserver installations?
View 1 Replies
View Related
May 24, 2010
I am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
View 2 Replies
View Related
Oct 9, 2010
RHEL 5 is my proxy server. i want to remove temp files and cache . How do i remove cache and temp files.
View 3 Replies
View Related
Apr 11, 2010
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
View 5 Replies
View Related
Aug 11, 2010
I cannot ssh into an RHEL 5.5 server (192.168.20.104) from another RHEL 5.5 server (192.168.20.101) unless server debug is turned on 192.168.20.104, and even then, I have to wait several minutes before the connection is established. scp to and from the 104 server is also not working.Here is the debug output on the 101 server when server debug is not enabled on the 104 server-:
Code:
[applmgr@tclg-clone-01 ~]$ ssh -vvv 192.168.20.104
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
[code]...
View 6 Replies
View Related
Jun 21, 2010
Having some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
View 1 Replies
View Related
Oct 29, 2010
In oreder to run an application software on RHEL 3 ES server, I created a link forcefully using following command from root id:
# cd /lib64/tls/
# ln -sf libc-2.3.4.so libc.so.6
before that I copied file libc-2.3.4.so from a workstation with OS RHEL 4 WS so that a link can be created.
Now I am unable to run any command except cd & pwd and it gives error messaage as given below:
ls:relocation error:/lib64/tls/libc.so.6:symbol _rtld_global_ro,version GLIBC_PRIVATE not defined in file ld-linux-x86-64.so.2with link time reference.
Before running this command libc.so.6 was pointing to libc-2.3.so file in path /lib64/libc-2.3.2.so.
I am now unable even to open a new window on the server.Please send me some solution as early as possible because this server is running production data and many users are runnig application on this server.
View 3 Replies
View Related
Mar 12, 2010
we are running a Red Hat Enterprise Linux ES release 3 (Taroon Upd 5) Kernel 2.4.21-32.ELsmp since several years. The server hosts an old ERP system who will be replaced at the end of the year.However it is necessary that some collegues are able to write some files to that server regulary. Since we are running Windows 7 on several machines, those users aren't anymore able to write to the samba share. Getting files from the share works fine.
But the problem seems not to be situated at the samba service because also the transfer using SSH (WINSCP) from any Win7 system to the server doesn't work.During testing we recogniced that transfering files smaller then 1kb works fine ... any file greater then 1kb ends up in an connection abort. This works with samba and also using SSH.All the workarounds editing some registry entries in Win7 for improving the interoperability between vista / win7 and samba don't work for us ... and also seem not to be the source of the problem.Is there a general known incompatibility between our RHEL version / kernel and Windows 7 regarding file transfers?
View 6 Replies
View Related
Aug 16, 2011
I have a RedHat box that I have configured, security, audit rules, latest updates, etc. I want to be able to "image" that configuration so I can kick other boxes with that "image", that way no other configuration/updating needs to be done on the newly kicked boxes. What is the best way to accomplish this? To make things more difficult, it would be near to impossible for me to pull any software off the internet for this.
View 5 Replies
View Related
Dec 14, 2010
what are the major differences between rhel 5.2 and rhel 5.4
View 2 Replies
View Related
Dec 9, 2009
I have a database server running RHEL 5.1 32 bit that suffered some catastrophic failures about 6 months ago. We were able to patch it back together and keep it running, but now the manufacturing site it supports is going to shut down for two weeks and I would like to replace it permenantly. Does anyone have any guidance for that sort of thing? I'd like to have the new server up and running before hand, basically changing the hostname/ip and restoring the databases only on conversion day. I've done this in the past with HP UX - Red Hat conversions, but this is my first red hat to red hat move. Any advice or shortcuts?I forgot to add the other wrinkle. The new server will be running 64bit linux.
View 1 Replies
View Related
May 20, 2010
I am trying to look at installing the PAE module on a RHEL 5 2.6.18-53 system and I cannot seem to find that around. I had hoped to find out if installing the CentOS 5 2.6.18-128 or 2.6.18-164 kernel-PAE modules would have a lot of negative consequences? Perhaps one of you could direct me to a download site that would provide kernel-PAE for a 2.6.18-53 build?
View 4 Replies
View Related
Sep 26, 2010
How do i know the version of RHEL I am running? Any command or way to know this.
View 1 Replies
View Related
Jan 13, 2010
I was wondering if there is a way of knowing what is the current set timezone for a linux server. I know that "date +%Z" gives the 3 letter abbreviation of the timezone, but then CST can be interpreted as Central Standard Time (US) and as China Standard Time. I'm looking for a way I could tell what is the real timezone, e.g. "Asia/Jerusalem", "Europe/London", etc. I know that I can set the timezone by symlinking /usr/share/zoneinfo/<Timezone Name> to /etc/localtime, but when I freshly install CentOS and choose my timezone, /etc/localtime isn't a symlink at all so I can't use this info...
View 3 Replies
View Related
Aug 5, 2009
I need information to configure squid proxy server in centos 5.3 i need that urgent.
View 1 Replies
View Related
May 28, 2010
Server with 4 disk partitions in an RAID 5 array using md. Yesterday the array failed with two devices showing as faulty. After rebooting from rescue, I was able to force the assembly and start the array and everything looks to be okay as far as the data goes, but when I run:
Code:
mdadm --examine /dev/sda3
I get (truncating to the interesting bits):
Code:
Raid Level : raid5
Raid Devices : 4
Avail Dev Size : 1448195216 (690.55 GiB 741.48 GB)
Array Size : 4344585216 (2071.66 GiB 2224.43 GB)
Used Dev Size : 1448195072 (690.55 GiB 741.48 GB)
Array Slot : 0 (0, 1, 2, failed, 3)
Array State : Uuuu 1 failed
And
Code:
mdadm --detail /dev/md1
yields:
Code:
Array Size : 2172292608 (2071.66 GiB 2224.43 GB)
Used Dev Size : 1448195072 (1381.11 GiB 1482.95 GB)
Raid Devices : 4
Total Devices : 4
Active Devices : 4
Working Devices : 4
Failed Devices : 0
Spare Devices : 0
Additionally, the 'slot' for devices a-d line up like this:
a - 0
b - 1
c - 2
d - 4 (!)
The first number 'Array Size' from examine is twice as big as sit should be based on the output from detail and comparing to twinned server, and why does the 'Array State' and 'Array Slot' from examine indicate there's a 5th device that's not indicated anywhere else?
View 2 Replies
View Related
May 19, 2011
I've got a system that is maxing out CPU. Running "mpstat -P ALL 3 5" shows the following.
Quote:
08:30:21 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
08:30:24 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1001.00
08:30:24 PM 0 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1001.00
[code]....
All 5 groups show the same. My first question is why would CPU0 be the only one with intr/s and the others do not? Info.The OS is RHEL 5.4 running as a VM on ESXi 4.1. Memory doesn't appear to be an issue, the system has 8 GB and its only using about 1.5 GB. Second question, I'm positive the process that is the problem is the tomcat process. Does anyone know a good way to see whats happening with a specific process?
View 6 Replies
View Related
Feb 3, 2011
When we assemble a raid array, from where does it load configuration information for that array? I thought it refers to /etc/mdadm.conf file, but in my system, mdadm.conf file doesn't even contain all information. Still it is able to successfully assemble previously created device.
# cat /etc/mdadm.conf
DEVICE /dev/sd[bcdjkl]1
DEVICE /dev/loop[012345]
[code]...
View 2 Replies
View Related
Feb 11, 2011
If I have to overwrite, I don't know if this will be done automatically when re-installing or If the new Ubuntu Server will be stored elsewhere on my HDD.
I only have the core install of US and was planning to build up what I want from there, starting with a GUI. There aren't any other OS's on the HDD and am using a Live CD of an UD.
View 3 Replies
View Related
Jun 5, 2010
I have a new lucid server. When I login to it via ssh it shows:
Code:
Linux syn 2.6.32-22-server #36-Ubuntu SMP Thu Jun 3 20:38:33 UTC 2010 x86_64 GNU/Linux
Ubuntu 10.04 LTS
[code]....
View 3 Replies
View Related
Nov 16, 2010
I'm new to, not just SUSE, but Linux(.) I saw the link to the newbie guide However it's asking for information, I choose not to make public, or or known.Also, Any info on running a game server for Source SDK games.
View 3 Replies
View Related
Dec 13, 2010
We have a situation where we have to set up a server to send traps with information regarding CPU, memory usage, etc. I know snmpd can be set up to allow another process to request snmp information about the server, but can it be done the other way around (have a host send information about itself to another server through snmp)?
View 4 Replies
View Related
Aug 5, 2009
I have seen and tried a lot of web information about issues with VNC and the RHEL 5.x implementation of VNC.
I can't seem to get the behavior I want. Let me explain.
With SLES 10, I can use YaST and with a few clicks end up with a system that when rebooted, accepts VNC viewer connections to :1 and displays the system login screen.
Here I can log in as root or any user. Once logged in, I can choose to use the command line to restart the system if necessary and eventually, I can reconnect with the vncviewer to the system login screen.
RHEL 5.2 has a "share your desktop" setting in preferences which works fine, but requires that I be logged in locally, which prevents remote restarts. There is also a system services dialog that refuses to start vncserver as a service. There are numerous tutorial in the RH knowledge base and the web that explain how to specifically setup individual displays, :1, :2 for specific users and claim that it can work after boot. I have not been able to get these working, but what I really want is a simpler, single display, :1, that will present the RHEL login screen so I can log in as any user I want. I am the only person accessing these servers and they are behind a firewall using secure protocols when remote.
I think Red Hat did not want to make this too easy as VNC users need to consider the security risks. Is there a way to get the SLES 10 VNC approach to work on RHEL 5?
View 5 Replies
View Related
May 7, 2009
Ubuntu ver 8.04.1 and Bind ver 9.4.2
I've set this up as a primary dns server, Bind is the only thing running on it, no gui, etc. I followed the default settings so I have a named.conf, named.conf.options, and named.conf.local file.
I have a log file I labeled as named.log in this path /var/log/bind. I'm using logrotate to rotate out the file.
My problem is that after syslogd restarts in the morning. My named.log file don't start logging info until I restart Bind. The new named.log file gets created and the old files rotate out and compress. All of the other log files in /var/log, syslog, messages, mail, etc, rotate out and compress like they should, after syslogd restarts.
I know that I could restart Bind using Cron but I shouldn't have to.
Below are snips of the files I'm using.
I named this one 'bind' and it's in the directory /etc/logrotate.d
View 8 Replies
View Related
Jul 21, 2010
I'm using java socket server program for transaction routing on rhel5. So I make a jar file of server to be run.
Now I need to add my application as a service. I just search in google how to do that, And i found some way and it is bellow,
#!/bin/bash
#
# chkconfig: 2345 85 15
# description: epic tle
# processname: epictle
[Code].....
I have written simple script (sh) to run jar file and I'm using bellow code for putting it as background
sh /opt/EpicTle/tle/run.sh >/root/.epicline/logs/debug/console.out 2>&1 &
I want to change 'console.out' file per day with date name rather than going with one file
View 6 Replies
View Related
Nov 25, 2010
I have a situation where I want to install various versions of RHEL on removable drive. My first option was a flash drive or an external USB hard disk, but its speed is too slow.Now I have been assigned a task to search for more options about this requirement. If anybody has experience in installing the same, then please share with me.
View 6 Replies
View Related
Dec 23, 2010
When I submit a job via lpr on RHEL 5 using lpr -P MYPRINTER filename and then do a lpstat -t, the actual file name is not listed...just a job identifier e.g MYPRINTER-8 On AIX the lpstat command shows the actual print file name Using -C, -J or -T options in lpr also makes no difference to waht is seen in lpstat
View 1 Replies
View Related