Server :: Home Network With Two XP Laptops And 10.04 LTS Desktop
Feb 12, 2011
I am a novice who prefers using the GUI. I am trying to connect a home network of two Windows XP Pro laptops with a Linux desktop (Kubuntu 10.04 LTS). The Linux machine connected easily to the Internet through the network gateway and can see both Windows machines. It can read Shared Documents on one Windows machine without authentication but cannot access the second (perhaps because the second is connected directly to the router instead of a hub like the other two).
On the second Windows machine authorization is requested for Shared folders but Administrator and User names and passwords don't work. All machines can be pinged, and Kubuntu has a fixed network IP address. I have read many HowTos and followed some command-line instructions for setting up Samba but may have confused the setup. Now when I get Kubuntu program updates there is an error report for "samba-common". I would like to be able to share files and printers, and also transfer files from Windows to a Linux folder.
View 14 Replies
ADVERTISEMENT
Oct 31, 2010
the title of this thread said it all. I've never ever seen a server (unless I've never paid attention) nor used it in my entire life. Having that said, I think you know I'm level 0 when it comes to servers.I start reading here:[URL]Also, I found two threads here which answered couple of questions I had.What I'm planning to do and why?1- Have a home server. I always had that idea of having one sever at home and connect all the other machines (PCs/Laptops) to that server.2- Backup.3- Sharing Files, Pictures, etc.
4- Connect to the interent through the home server. I live in a big house and we have only one ADSL Router/Modem. Obviously, I can't access the internet from any room unless I'm close to the router. The server will be in a place where I could connect to the interent even if I'm very far from the router.5- I've never used Servers before so I'd like to try it now especially I started to use Linux and stopped using Windows and yes, I don't want to go back to Windows no matter what.
My Hardware:In my signature, you can see some of my hardware but I'll list them here:MB - GigabyteIntel P4 @3.00GHz2GB RAM500 SATA HDDLAN - Built inWireless Adapter - D-LinkADSL Router - CableWireless (the brand name)Laptops - Not mine but will be connected to the serverMy current PC has 9 OS's installed (Multi-Boot System). Other laptops have Windows and I'm planning to use Linux on one of them which is PII with 64MB RAM and 4GB HDD.y Questions: Again, this is my first time so 1- Do I have to remove all the other 9 OS's and keep that PC solely for Ubuntu 10.04 32-bit Server? or it's OK to keep them? If yes, then shall I be able to boot into Ubuntu 10.04 Server after choosing it from GRUB2 Menu?
2- I read about Server Types but as mentioned above, my usages are limited and I don't need Web Server, Mail Server, etc. So, do I really need a Server (Ubuntu 10.04) OS to do that? or Ubuntu 10.04 Desktop Edition is up to this job?3- I guess this should be the first Question. Do I need any particular skills to deal with Servers? or just general knowledge will be enough?I believe in one thing. No matter how much you read about something and learn, the real experience or the practical experience is something else.When you do something by yourself, you will never forget it.
4- Probably this is same as Question #2. I'm very bad in CLI I know very few commands only and I know that GUI is disabled in Servers OS. How hard that could be for someone like me? I read a reply by a friend of mine (HermanAB) at one of the threads here. He said if someone wants to use GUI on a Server then it's better to use the Desktop Edition. Thing is, I'm very interested to try and use a server but as I mentioned, I'm very weak in CLI.5- If Ubuntu 10.04 Desktop Edition could offer all the tasks I want (listed above) so what exactly do I need to know/learn?
View 9 Replies
View Related
Oct 2, 2010
How do I setup a host computer to accept display from laptops in a group of laptops?
I have a group of people each set to manage a specific task. I have a projector in the middle of the room hooked up to a computer. How can each user push their screens to the host computer? All computers are on a lan
View 3 Replies
View Related
Sep 8, 2011
I may have to work in another state for some time, and I'd like to access my home machine desktop remotely, like this: Server - home machine, oS 11.4 64-bit, KDE 4.7, 1920 x 1200 screen (currently set to 24-bit color depth), 1 Mbps upload speed, behind a Dlink DL-524 router I manage.
Client: laptop, oS 11.4 64-bit, KDE 4.6.5, 1280 x 800 screen (also 24-bit color depth), unknown up/down speed - probably huge at work, crappy at apart hotel. I'd like to keep the server resolution, if possible, even if the client's is smaller. I want to be able to star/stop KDE apps in the server, move files between folders, and fix the issues that only happen when my wife is at the keyboard (it's a machine conspiracy, she says ). So I'd need to connect to the server's current session/user (which is myself, i.e., same login/password).
What do you recommend for this? I've read Swerdna's tutorial for 11.2/11.2 (a million seen malcomlewis xrdp 0.6 packages for 11.4 (you rock, malcomlewis!), as well as this thread: RDP into OpenSUSE 11.2, however most seem concerned with rdp between windows and linux boxes. Is there something better/faster/simpler for oS-to-oS RDP or should I use xrdp all the same?
View 9 Replies
View Related
Dec 2, 2010
I have both windows (xp and win7) and mac (osx snow leopard) running on my network. I'd like to find a unified system that I could use as a file server. Mainly, I'd like to have it hold music and movies, maybe run some automated backups from a win 7 desktop. I'd also like it to be a print server. I'd like to run the most simple and lightest weight OS for the server os. However, I don't think I have the basic linux knowledge to run Ubuntu Server as it is terminal based. I have installed it on my machine but I feel like im running in circles. I have it installed and can SSH in with my laptop no problem. I feel like I may be better off installing Ubuntu Desktop and removing what I dont need. at htis time the server has only a 40gig hdd in it, i also have a 500gb hdd i'd be using for the files.
View 14 Replies
View Related
Aug 7, 2011
Bought a couple new cards to do some bitcoin mining (just an experiment) and before I hook them up I want to know how to use p2pool. im not that good with ports and was wondering how to correctly configure it. I keep getting Bitcoin is downloading blocks errors.
Edit: Im also getting a low mhash rate of 1.5. Is this correct for a geforce 9400m? Im not too worried about it after I use these new cards. and is there a difference in using laptops vs a pci slot desktop video card?
View 1 Replies
View Related
Mar 21, 2009
I and my friend use FC10 on our laptops. We want to share our data by creating a wired network between our machines because a wireless router is something what our pockets can't afford. What should I do for it? What type of wires and stuffs do I need? I Googled for some link for doing so in FC10 but couldn't find.
View 6 Replies
View Related
Apr 28, 2010
I have two laptops with Ubuntu 9.10
I want to connect them with a wireless router. phillips snb5600 router.
So I can go online and share files with both laptops
My LG E500 laptop to function as a modem with a connection to the internet with a 3g usb modem.
There are built-in wireless LG E500.
My other laptop is an old webtech without wireless built in, but I have a wireless USB thing fully with snb5600 Router. Ubuntu can find the wireless USB thing. so it's not a problem.
Both laptops can also connect with the router with cable.
View 5 Replies
View Related
May 20, 2010
I was curious if I could have the home folder system from a desktop install point to a set of home folders over on the server? It would streamline my backups and make files a bit more central for accessing
View 3 Replies
View Related
Feb 8, 2010
15.4 inch laptops tend to be slightly cheaper than 14-inch laptops? Supply and demand? and if you do not mind answering another question, what's your perspective on uncle Larry eating Sun?
View 3 Replies
View Related
Feb 16, 2010
I'm about to set up file server for client, both win and osx and later on web server as well.first think is that i have an old box packardbell with 2.4 gh amd processor 1 gb of ram it's an oldie one 2000 i guess i think that there shouldn't be problem to install it as i was running opensuse on it before and accept sound card everything was running normally. I'm newbie in linux world but as much as i can understand is that i will need samba to make it work with win based os but what about mac's os x? is samba for it and how to set it up ?
View 9 Replies
View Related
Jul 8, 2010
I turned my home PC running Ubuntu 10.04 into a server, and so i am so lost, after reading like a 10-20 different guides and/or official docs, I am totally lost.
All I wanted was to create a custom 404 error page...i read about how people edited .htaccess files to customize error pages, i tried and failed also, editing apache2.conf, I got lost and i dont wanna mess up everything and also, how you're supposed to not touch either of those as its not how it should be done and instead you need to edit httpd.conf and i did and FAILED! again...
Also how do I make it so that I can make subdomain(s) on my site? and wth is a name server and where do I get one?
View 4 Replies
View Related
Apr 20, 2010
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies
View Related
Mar 17, 2011
I am having trouble with netatalk after rolling out 11.4 on my home server. I am using the same conf files from my previous 11.3 setup. I use netatalk for my macs as it tends to work better than samba.
I can access the afp volumes if I enter the full unc in finder (afp://server/data). The problem is that if I try to browse to the server via finder (click on the server icon) I get a connection fail. With 11.3 this would simply list out all available volumes.
View 1 Replies
View Related
Feb 14, 2011
I am trying to set a Ubuntu home server to be a Network Attached Drive, a Media server, and Backup server.All of the computers (mostly windows 7 machines) can see and connect with the shared ubuntu folders, and read write and execute files into the folders. The problem is when programs are installed onto the server they operating systems cannot have "Full control", or change the owner of a file.
This is an issue when using the Ubuntu shared folders as remote hard drive locations because when Windows goes to run the files it keeps popping up with the "Open file - Security Warning" preventing files from being natively run.
View 1 Replies
View Related
Dec 28, 2010
How could I configure Ubuntu to be setup as follows...
Wireless Client ----> Wireless Router ----> Home Server ----> Internet
What is needed to make all of the wireless traffic go to my internet connection port. I will be having two ethernet cables plugged into the system one from the wireless router and one to my internet router.
View 1 Replies
View Related
Aug 26, 2009
It it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
View 3 Replies
View Related
Feb 7, 2010
I am trying to setup Fedira 12 Linux Apache in my home network. I am able to access the hosted website from inside my home network without any problem. I am facing the problem to access it from outside. At the moment i have connected the Apache directly to DSL modem for testing purpose. I was reading "The ISP may have blocked the HTTP port 80. So check it by connecting the Apache directly to DSL modem." The temporary network connections for testing purpose are as follows..
DSL modem (SIEMENS Speed Stream 4200)-->Fedora 12/Linux Apache Server
I am even unable to PING the real ip (IP for DSL modem).(Firefox gave me error message "Connection Timed out) I have tried to ping it from the internet.I can PING the DSL from Apache without any problem.
1. Why i am even unable to PING the real IP of DSL modem at my home.?
2. Is it possible to run/setup Apache by using this type of DSL modem?
3. DSL modem has real IP. DSL MODEM assigns private IP (192.168.x.x) to Apache. So when a http request form the internet came to DSL modem on port 80, will it forward to Apache automatically.? or i have to made any changes.(I can not see anything in DSL modem to change/modify), OR do I have to use another DSL MODEM/Equipment (router)? This setup is just temporary. The actual design is as follows
DSL MODEM(Speed Stream 4200)-->Fedora 12 Linux ROUTER--->Internal network with DNS/Apache Server
View 9 Replies
View Related
Mar 4, 2011
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
View 1 Replies
View Related
Mar 29, 2009
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies
View Related
May 4, 2010
I am attempting to setup the following:
1.User login/authentication via a single NIS server.
2. User home directory should also be on the Same NIS server.
3. If possible to setup a single shared home directory for all users.
OpenSuse version 11.2 There are twelve workstations from which users will login using the NIS authentication. I have succeeded in setting up NI server. However login fails as the home directory is not accessible.
View 9 Replies
View Related
Aug 24, 2010
I would like to build a server to act as a file/print server for my home. My wife, sister in law, and myself would use it. I would like it to be friendly to both windows and linux. My sister and I are both dual boot and for now my wife is windows only. Pretty soon though I plan on setting her up on linux as well. What would I need? And are there any "good" guides to setting something like this up?
I would like to use the system to:
- Store media / files
- Maybe have KMyMoney on it and share with the wife
- Hook a printer to and use as common printer
View 2 Replies
View Related
Aug 23, 2010
I'd like to set up my home network with an Ubuntu file/internet server. In addition, I would use this server to monitor internet traffic. What hardware/software would be required?
My current network is as follows:
Laptop 1 Ubuntu 9.1
Laptop 2 Vista
Laptop 3 XP
Desktop Ubuntu 9.04 (would be used as server)
All connected thru linksys wireless router to cable modem.
View 2 Replies
View Related
Aug 13, 2010
Asterisk and its cousin technologies intrigue as well as confuse me. I'm wondering: Is it possible to set up an Asterisk (or other) server on a home computer with no special hardware and use it to route calls between mobile devices in remote locations? I'm hoping this could work similarly to Skype Mobile, Google Voice, etc., except on a WAY smaller scale. This is just something I'd use personally for calls to family and friends--nothing huge.
Since my computer is just a regular laptop with no 3G connectivity, I don't expect to use 3G for calls. I just think it would be cool, for instance, to go to a caf� with WiFi and use a SIP/VoIP client on my Android phone to call up a friend who also has a phone or PC with a SIP/VoIP client on it. I realize I could do the same thing far more easily with an account at Skype or some other provider. My interest in attempting this project is more for the learning experience than practical use.
If indeed this is possible to do with the hardware I already own, any tips for starting out? My computer is a MacBook Pro 5,5 (dual-booting Sabayon Linux and Mac OS X). I know I could install Asterisk from within Sabayon, install a specialized telephony distro to a new partition, or run a virtual Asterisk machine--but I'm not sure which option, if any, would be most appropriate here. I'm also not sure if Asterisk would accomplish what I want, or if I should look at other software.
View 6 Replies
View Related
Feb 1, 2010
share an external USB NTFS drive on my home network. The drive is attached to my desktop box running Debian Lenny. It's accessible on the desktop. I have a directory on the drive that I would like to make accessible to a Windows XP laptop. Read-only would be fine. The laptop has wireless access to the network.
View 8 Replies
View Related
Feb 7, 2010
I am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose.
Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem??
2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
View 6 Replies
View Related
Aug 9, 2010
I have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
View 6 Replies
View Related
Mar 26, 2010
I have a debian home server right now, I'm using samba for my file server but I was wanting to stream my movies and music to my other computers. My family (the other users on the network) are NOT computer savvy, and to top it off they are using both Windows (xp) and Mac (Snow Leopard) machines. So I'm looking for software that is simple to use that will allow other operating systems to use it. I would think the easiest way would be to stream the music/movies through a home website. I have seen quite a few programs out there that stream music, but none for movies.
View 3 Replies
View Related
May 30, 2010
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
View 3 Replies
View Related
Mar 27, 2011
Continuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
View 4 Replies
View Related
