Server :: Convert Dual-Boot Into Virtualized Configuration
Jun 27, 2011
I have these file systems for my linux distro. I dual boot with another OS that has its own file system. My primary disk drive has ten(10) partitions of various sorts to implement this. If I boot Linux, is there some way to point the virtualization parts at those other file systems to boot rather than load other different files into Linux file space?
Clearly, I'm missing something in how Wine, VirtualBox and similar virtualization currently happens. But what I describe above surely seems more attractive.
I've currently got a Dual-boot of Windows 7 SP1 and Ubuntu 10.10, I'm wanting to wipe off the Windows 7 and keep my Current Ubuntu 10.10 (And ofc add the extra space from the Win7 Partition)I had Win7 Installed first and I used this Guide --> [URL] Below is an image of how my hard drive is partitioned currently.
I'm trying to get a dual boot system. [URL] So i'm just following it. But but when i try to load Linux from the NTLDR i just get this error: BootPart 2.60 Bootsector (c) 1993-2005 Gilles Vollant [URL] Loading new partition Bootsector from C.H. Cannot load from harddisk. Insert Systemdisk and press any key.
One of the things holding me back from building a new system with nothing but Linux is the vague possibility that that I might need to use some proprietary program that only works on Wind'ohs in the future. So far it has been easy to keep dual boot systems around, but a new system will be > 4 Gb of RAM of course, so I can't just install one of my copies of Win XP on it. But buying a new 64-bit version of Wind'ohs for ~$200 seems a waste.Is it now possible to run XP in a "virtual" machine under Debian? More importantly, is it possible to install XP completely from within the virtual machine so it never sees the > 4 Gb or RAM and freaks out? What sort of hardware is required to do something like this? I presume a CPU with certain special capabilities is essential, but wouldn't those special instructions (whatever they are) be pretty standard now? Would the virtual XP install need its own partition?
I got a new laptop having windows 7 preinstalled. Now I want to dual boot it by installing ubuntu as second os. I will be using ubuntu as primary, and windows 7 only if its absolute necessary. How can i make home folder common for both os? I mean (Users/mithun in windows 7 should be mapped to my home folder in ubuntu). I would also like to know what others do (hd partitioning etc) while dual booting.
I've a Lenovo G50-80T with W8.1. I want to install Debian 8.1 in dualbooting mode. I've done this other times without problems. But this time I want encrypt the Linux partition (not the Windows partition). I'll use dm-crypt to do that. I want to know if this way is secure for protect the data on Linux partition or if I need encrypt the entire drive.
I'm currently dual-booting Squeeze & Windows XP on a machine i use frequently.
In my experience on the desktop, i now see no reason to have Windows XP as a boot option, & wanted to try & avoid a full re-installation of Debian in order to remove XP (merging it's partition with / ).
I have a checklist that i put together, but wanted to be sure this was all correct before going forward.
1. Perform full back-up of all data.
2. Boot into Debian, through GUI -
System Tools > Disk Utility
- Select HDD (80GB Hard Disk) - Select windows partition ( /dev/sda1 ) - Format /dev/sda1 to Ext4 Filsystem
3. Boot Live CD
- Use gParted to extend /dev/sda2 (was 38GB, will extend to 78GB)
4. Remove XP from the boot menu.
( Note: My ~ folder is on the same physical drive as / (same volume), but i actually store all Media on a separate physical drive which is formatted in NTFS. I plan on reinstalling XP using a virtual hard disk, & sharing that with the virtual machine.Here is a screenshot of my Disk Utility - [URL]
I have a Jessie with grub2. I've bought ssd and copied root partition onto it. I've also installed grub on this disc. I would like to have dual boot:
- First option: old root booted from hdd - second option: boot from copied ssd and use root from it.
So i would have two identical but independent configurations.
Both disc has different uids (changed after cloning).
I had a hope that i will change fstab to mount root partition from ssd, but it doesn't work. I need to change grub configuration, but how to add new position?
There is also problem that bios doesn't allow me to choose disc to boot from. So i would rather prefer to change grub configuration for dual boot from different disc.
I'm trying to get Gnome 3 to work on 11.04 under virtualbox (3D acceleration enabled) but I get the message that "it can't load session gnome" when I try to log in. The same message appears when I try to do this on an EC2 instance. Please let me know if someone got it to work on EC2.
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
I'm running an 8.04 server and I'd like to have a gui option for my goddaughter to use. For various reasons I don't want to make any changes to the server and also for various reasons I'd like the gui desktop to be 9.10.
I had 9.10 running on another machine but the motherboard died on me. If I just slot that hdd into the machine, edit grub etc, will I be able to reconfigure for the different hardware or will it simply fail to boot? Wiping the drive and installing again wouldn't be the end of the world but it would save a lot of time if it's not necessary.
install on my machine with windows xp an Ubuntu 10.10 server without losing windows xp..I can't find some step-by-step procedure on how to set up a dual boot
I install windows XP and then unix centos. But again when I reinstall Windows xp then my unix centos not shows in boot menu. It automatically goes in windows xp. Now how can I recover my Unix centos.
I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04.
The problem is that I would like to use a larger size display that is configured by default.
Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080.
This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation.
The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file.
I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily.
Im trying to install Ubuntu server for DVD/CD iso.The mdsum is correct: md5sum ubuntu-10.04-server-i386.iso ives 15342636441181f7a19c65984b44e24c ubuntu-10.04-server-i386.isoI have tried it a number of times and the same sequence re-occurs:The first error occur during �Installing the base system�First sign is a red screen displaying a �Debootstrap warning� After a few re-tries the system defaults back to the Installer menu:I then select to post the debugger logs to a web server that starts:the first sign of problems in syslog are:
Aug 17 09:35:35 net/hw-detect.hotplug: Detected hotpluggable network interface lo Aug 17 09:35:37 hw-detect: Loading PCMCIA bridge driver module: i82365 Aug 17 09:35:37 kernel: [ 268.912151] Intel ISA PCIC probe: not found.
I am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
I have one computer with windows 7 (computername = windowspc) connected through a modem router to a computer running Ubuntu 10.10 (computername = linuxpc). Had Samba setup and working between them.
Decided to check out Fedora 14 (computername = linuxpc). so set up dual boot on the on the Ubuntu box and installed samba. When Fedora is running Win 7 only sees shares for Fedora. If Ubuntu is running win 7 cannot connect to any shares stating a bad file path. I understand that both linux oses use the same ip address and thats probably were Win7 must have problems.
Ran nbtstat r in windows and was able to swap the situation around i.e. win7 sees Ubuntu but not Fedora.
I would like to be able to set it up so that when logged on to either of the linux oses I would be able to see shares from both partitions in Win7. Or if thats not possible, to differentiate them in some way so that Win7 would recognise which os was running and display the shares accordingly.
Am slowly parting company with MS Windows. I have been using this app to convert, burn, and then be able to play on most all DVD players, ConvertXtoDVD. Is there something I can use in Ubuntu that is fairly easy? Also would like something in Ubuntu to convert and burn to Dual Layer media and then play on standard DVD players.
I have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations: Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020 of the same hard drive for core.img, core.img is at this location on /dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
I'm trying to setup a PXE server with Jessie. I've got the basic setup working by following the steps at [URL] .... That part was really easy. I would like to make the process as automated as possible and then add Win7/10 to the system as well.
The first hurdle I've come across is the fact that netboot downloads everything off the repositories. This has the potential to use up a lot of bandwidth and I would like to avoid this if possible. The first idea I came across was to create a local mirror, this way not only will I be installing everything off the LAN but I'll also be getting all the updates for my systems off the LAN too. I wasn't too keen on this. The other option that I read about was to use the debian ISOs instead.
What I have tried is to copy the Debian ISO to /var/www/html/debian
Then, when my boot via the pxe, i set the option to manually select a repository and then i type in the IP address for my webserver for the address and type in /debian for the mirror directory.
However it breaks at this point. I get a message saying "Downloading a file failed"
I would prefer the as much of the install to come from the ISO as possible to keep bandwidth usage to a minimum.
For Win10, I read that I have to use an AIK to build the Winpe and then boot that. Then I can load the Windows10 ISO via nfs through Winpe.
pxelinux.cfg/default Code: Select allroot@DHCP:/srv/tftp# cat pxelinux.cfg/default UI menu.c32 TITLE PXE Test Boot LABEL Debian 8   kernel linux   append vga=normal preseed/url=http://192.168.0.254/debian/preseed.txt initrd=initrd.gz --
LABEL Windows 10 Â Â kernel ?? Â Â append ??
LABEL HardDrive Boot   This is a preseed I have setup so far
Code: Select all#### Contents of the preconfiguration file (for jessie) ### Localization # Preseeding only locale sets language, country and locale. d-i debian-installer/locale string en_US
i want to know that if i install linux on to my pc with SWAP/ boot as partition and after that i want to convert them to LVM2 type configuration .how can i do that.i want to create a system having logical volumes from that system without reinstalling these partitions should convert into two LV's LV 0 for root LV 1 for swap
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code: Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
