I download ffmpeg from repository with command svn checkout svn://svn.ffmpeg.org/ffmpeg/trunk ffmpeg
after cd /home/username/Desktop/ffmpeg
./configure --enable-shared --enable-gpl --enable-nonfree
make
make install
after that if i call ffmpeg I will obtain this error ffmpeg: error while loading shared libraries: libavdevice.so.52: cannot open shared object file: No such file or directory
what can i do?
I am trying to install ffmpeg-php on a centos 5.6 32bit. First I installed php-devel,yum install php-devel. I downloaded the ffmpeg-php from here to /usr/local/src by this commands;
1.wget "http://downloads.sourceforge.net/project/ffmpeg-php/ffmpeg-php/0.6.0/ffmpeg-php-0.6.0.tbz2?use_mirror=garr"
2.tar xjvf ffmpeg-php-0.6.0.tbz2
3.cd ffmpeg-php-0.6.0
4.phpize
5../configure
6.make
7.make install
Now the output of the ./configure, make and make install is here below. Can someone tell me what I am missing to successfully install ffmpeg-php?
[Code]...
I'm trying to get FFMpeg installed on my server, but I'm not having much luck I've managed to get it working with AVI/MOV etc , but now I'm trying to convert into MP4, I get an problem:
root@vps [/etc/apt]# apt-get install ffmpeg
Reading Package Lists... Done
Building Dependency Tree... 50%
Building Dependency Tree... Done
ffmpeg is already the newest version.
0 upgraded, 0 newly installed, 0 removed and 4 not upgraded.
root@vps [/etc/apt]#
[Code]....
I would like to install on my box FFMPEG with libx264 support. First of all I've tried yum install ffmpeg, but it occurs that it downloads a version from 2007 (?) and without libx264. Than I've tried this: [URL]. And everything goes ok till last ./configure:
./configure --enable-gpl --enable-postproc --enable-nonfree --enable-postproc --enable-libfaad --enable-swscale --enable-avfilter --enable-pthreads --enable-libxvid --enable-libx264 --enable-libmp3lame --enable-libfaac --disable-ffserver --disable-ffplay
And in this moment I do "make" and get:
-bash-3.2# make
gcc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -fomit-frame-pointer -pthread -g -Wdeclaration-after-statement -Wall -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -O3 -fno-math-errno
-c -o libswscale/swscale.o libswscale/swscale.c .....
libswscale/swscale.c:3409: warning: assignment discards qualifiers from pointer target type
make: *** [libswscale/swscale.o] Error 1
And as you can see I get a lots of errors. Tried to install it for 5 day now, How to make this work??
I bought un-managed VPS server for host a video sharing script. Server details
[Code]...
And that video sharing script needs "FFmpeg,Flvtool2,Libogg + Libvorbis,LAME MP3 Encoder" I searched google,forums,Articles. But i couldn't be able to find a way to install them on Centos
i am trying to install ffmpeg on centos machine. i need a source installation for this. i used FFmpeg 0.6.1 .tar.gz file for this. Also i want to install this with maximum codec support. when i used the configuration option as
./configure --prefix=/usr/local/ffmpeg --enable-shared --enable-gpl --enable-libx264 --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libspeex --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-pthreads --enable-libvpx --enable-librtmp --enable-x11grab --enable-version3 --libdir=/lib64 --enable-nonfree
i got an error as ERROR: libopencore_amrnb not found. i tried to find this package but it was utterly failed.
Since ffmpeg 6 is out for some time, when will Ubuntu Lucid afford such a new ffmpeg package from its repository?
View 2 Replies View RelatedCentOS 5.4 (cPanel 11.25.0-R42213) I've used this guide several times on several servers to get FFMPEG`/FFMPEG-PHP to work with CentOS 5.2 and various hosting panels. But after trying on a server with CentOS 5.4, I've run into problems.
# Install FFMPEG on CentOS
cd /root
echo "[dag]" > /etc/yum.repos.d/dag.repo
echo "name=Dag RPM Repository for Red Hat Enterprise Linux" >> /etc/yum.repos.d/dag.repo
[code]....
yesterday tried to install ffmpeg with yum. but package not found. so i found the webpage about updating dag.repo and trying again. that didn't work.
So i ram yum update. that took 5 hours but still yum install ffmpeg gave me package not found. yum can't seem to find anything now.
Code:
Having trouble with #yum install ffmpeg.
Here's the error:
I added:
I am using Ubuntu 9.04 I wish to inter convert one video to another format using ffmpeg and x64. how to install offline ffmpeg and x64
View 2 Replies View RelatedFirst when trying to play some video Totem (as was set as default application) asked about missing decoder then offered installing of gstreamer-version-xx, but it couldn't as described below. I removed Totem and installed MPlayer and Gnome-MPlayer interface and everything is perfect in regard of playing video files
Now I wanted to install other package and it again needs this gstreamer0.10-ffmpeg package:
Depends: gstreamer0.10-ffmpeg but it is not going to be installed
i wanted to install ffmpeg with lame mp3 support.its procedure is as follows:
cd /usr/local/src/ffmpeg/
./configure -enable-libmp3lame -enable-libogg -enable-libvorbis
make && make install
but i have not passed -enable-libmp3lame during installing to ./configure so mp3lame support is not available.how can i modify existing installation to install libmp3
I have been working on vlc (windows) and now i want to use the same in linux...so ma trying to compile it in linux..... i need ffmpeg functionality and others as such...so please provide me with the complete link and order so as where to fetch the source code and to compile....i have done googling and found lots of tutorials and most of the are confusing and not clear......and i tried doing them and am now confused(whether they are compiled or not) cos when i try to instll them it says already exists and when i try to use the functionality it says canot transcode ffmpeg doesnt exitst.....I am badly need of vlc transcoding options. Am using ubuntu 10.
View 9 Replies View RelatedI've been trying to compile OpenCV3 beta for Debian Jessie, but I can't figure out how to compile support for video I/O .Tutorials that can be found on-line usually use ffmpeg library, but as I found out Debian 8 replace this library with libav (?). Of course I found tutorials how to remove libav and install ffmpeg, but I would rather try to find some another way.
I use OpenCV3 beta from URL...
When I use this switch
Code: Select all-DWITH_FFMPEG=0 compilation succeed, but there is no support for video.
When I don't use that switch, then I get this error:
Code: Select allIn file included from /home/sehny/Dokumenty/opencv-3.0.0-beta/modules/videoio/src/cap_ffmpeg_impl.hpp:65:0,
from /home/sehny/Dokumenty/opencv-3.0.0-beta/modules/videoio/src/cap_ffmpeg.cpp:45:
/home/sehny/Dokumenty/opencv-3.0.0-beta/modules/videoio/src/ffmpeg_codecs.hpp:98:7: error: ‘CODEC_ID_H264’ was not declared in this scope
{ CODEC_ID_H264, MKTAG('H', '2', '6', '4') },
[code]...
I am running 64 Bit Debian, 6.0 install with VLC and libavcodec52, libavformat52, and libavdevice52 installed. I also installed recordmydesktop which creates an ogv file, and I would like to use VLC to convert the file to an MP4. Then I can add it to a project under Open Shot Video Editor.
I get the following errors when I try to convert the file: Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: H264 - MPEG-4 AVC (part 10). If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player.Do not contact the VideoLAN project about this issue.
Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG AAC Audio. If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue. I've used Google to search for the error message, searched on the forum.videolan.org, and searched on this forum. So far, I've not found a lead to the solution. What am I overlooking/missing?
I have installed ffmpeg via github on a ubuntu 11.04-machine.An application - ClipBucket - require ffmpeg version r19000...When doin a ffmpeg -version I get the following:Quote:
ffmpeg version git-N-29993-ga4b6000, Copyright (c) 2000-2011 the FFmpeg developers
built on May 26 2011 04:30:20 with gcc 4.5.2
configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-
[code]....
How users to install the latest svn versions of x264, ffmpeg and mplayer. Primarily, this is important for users who rip movies from dvds.
How do I perform the same tasks using sbopkg? I believe some compilation options must be changed to reflect the svn changes.
Has anyone done this before? Are the steps important when using slackware 13 x86_64?
I was trying to play some mp3s and mp4s in my totem but keep on getting this error report of which I have attached some screenshots. I also tried to download some things that I usually put on my system such as: vlc, ffmpeg, dvdbackup, dvdrip, audacity, thoggen, handbrake, audacious & sound converter but I fail in the process.
Here are my outputs:
Code: [root@localhost ~]# yum install ffmpeg libdvdcss libdvdread libdvdnav libdvdplay lsdvd mplayer gxine
Loaded plugins: refresh-packagekit
google-chrome | 951 B 00:00
google-chrome/primary | 1.4 kB 00:00
google-chrome 3/3
Setting up Install Process
No package ffmpeg available.
[Code]...
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies View RelatedI am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies View RelatedI have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies View RelatedI've got a box (prev used for WinXP) with 2GB Ram and a new 500GB HD to throw in there.Noticed on the Wiki CreatingUpdateMedia and reading as much as I can ramping up for this.I'm curious how I should partition this disk, and what other decisions I'll need to make on install.I see quite a bit of interest also in virtualization, and if I find a need, this could be useful too.Kernel upgrades?how to do? Does the disk have to be wiped or just use an alternate boot device to replace K on HD? I have a tech background in programming and some solaris, but *nix has grown up in the last 5 years.Hopefully devices will function and networking connectivity can be acheived without too much troubleshooting.
I'm doing this in part to be more educated, especially in the new world of web-hosting where you have a virtualized box, root and shell access, and need to manage it yourself. Beyond that even, my goal is to be able to work on my web-host by setting up a remote linux desktop, and I'll be looking for ways to configure that. There are clients out there (VNC, etc), but I'm not sure on the host-server configuration, and also the port-forwarding setup on my local router.
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
I'm new on Dell PowerEdge 2900. I dont know how to install centOS 5.2 on it. whice OS type that I should select. at first I select RH enterprise 5 and it format HDD. already and I put centOS 5.2 in, but it was deny and eject that cd. when I power off it shown that
"root(hd0,1)filesystem type is ext2f2,partition type0x83
kernel/linux/vmlinz%(ksLocations)
Error is : file not found
press any key to continue"
I am trying to do a basic install of CentOS 5.4 on my embedded computer. It is a Linutop 2 system with a AMD Geode 800MHz CPU and 512Mb Ram. Have installed an IBM 40Gb 2.5" HD for OS storage. I am doing the install procedure in text mode. Everything goes as planned until I get to the package selection.
1. Booting from (i386) DVD with "linux text" parameter.
2. Skipping media check.
3. Selecting "English" install language.
4. Selecting "DK-latin1" as keyboard layout.
5. Selecting "Remove all partitions and create default layout" and selecting "no" to modifying partition layout.
6. Selecting "yes" to configure "eth0" and mark to enable "IPv4" on boot.
7. Selecting DHCP for IP configuration and Manual host name.
8. Setting time zone to "Europe/Copenhagen".
9. Setting root password to a 16 digit alphanumeric pass-phrase.
10. De-selecting "Desktop - Gnome" (no other entries selected).
When the system is checking for dependencies, an exception
Traceback (most recent call first):
File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 426, in returnNewestByName
raise PackageSackError, 'No Package Matching %s' % ui_pats
File "/tmp/treedir.22057/instimage/usr/lib/anaconda/yuminstall.py", line 1072, in getBestKernelByArch
pkgs = ayum.pkgSack.returnNewestByName(pkgname)
[Code]...
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
[Code]...
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies View Related