Security :: Launch The Package To Get A Test Result?
Jan 15, 2011
i have fedora distribution running in my virtual machine. I installed sectool- .9.5-1.fc13.i686.rpm & sectool-gui-0.9.5-1.fc13.i686.rpm (the gui of the tool)
Then i modified the file /etc/selinux/conf to change the selinux from enforce to disabled (so the test can be run) the prob now, each time i try to lunch the package to get a test result... it takes so long time without result even if i choose 1 test only as u can see in the attached file. I've been waiting for more than 1 hour with no result
View 4 Replies
ADVERTISEMENT
Jul 12, 2010
From the start-up manual I know the Firmware Test Starts a BIOS checker that validates ACPI and other parts of your BIOS. I noticed there are 3 failures in the result. (The font size on the screen is too small for me to read.) I got stuck in trying to save to either of the two choices provided with names I don't understand. I had to use the three-finger salute to bail me out.
View 4 Replies
View Related
Oct 5, 2010
In Add/Remove package utility, after click the categories, like Program, office, there is no result.Is it correct? Or how to fix it?
View 2 Replies
View Related
Jun 22, 2009
I have installed the rkhunter , but it does not work i kept on trying to open the programe but no result come out
View 2 Replies
View Related
Mar 3, 2010
I have installed snort + mysql + acid base, I add some rules into /etc/snort/rules/local.rules to test the alert:
alert icmp 192.168.1.20 any -> 192.16.1.21 any (flags:A;ack:0;msg:"NMap icmp ping")
alert icmp 192.168.1.20 any -> 192.16.1.21 any (content:"abcdefgh";;msg:"ping de windows")
alert icmp 192.168.1.20 any <> 192.16.1.21 any (flags: S; msg: "HOULA SYN Packet!"
After I restart snort and I tied 2 pc by cross cable (192.168.1.20 for windows and the victim is 192.168.1.21 for Linux where the snort is installed), my HOME_NET 192.168.1.21 and the EXTEREL_NET !$HOME_NET. The problem is when I run:
snort -dvi eth0 -c /etc/snort/snort.conf
I see the packet transmitted and received (the received conten "abcdefgh" ), when I stopped snort CTRL+C I don't found any alert in the result!!! Run time prior to being shutdown was 218.523030 seconds.
Packet Wire Totals:
Received: 1346
Analyzed: 1342 (99.703%)
Dropped: 0 (0.000%)
Outstanding: 4 (0.297%) .....
dcerpc2 Preprocessor Statistics
Total sessions: 0
database: Closing connection to database "snort"
database: Closing connection to database "snort"
Snort exiting
View 4 Replies
View Related
Apr 20, 2011
I have a server, running Centos 5.5. It runs daily rkhunter and logwatch. From both I get a daily mail.
I have a desktop computer, running Fedora 13 (almost 14...). It runs also a daily rkhunter and logwatch. But I get ONE mail from logwatch, which contains the result of rkhunter.
On the server, I want also only mail from logwatch, containing the rkhunter results. But so far, no luck.
How can I get the rkhunter results in the logwatch mail on my Centos server?
View 2 Replies
View Related
Feb 15, 2011
I want to know how can I test my server security with hping3 tool I want to make a virtual DoS or DDoS or SYNK attack in my LAN to test my server security and ability against these attack .Is hping3 a good solution for this or not if yes how can I do this which option of this can make such these attacks?
View 4 Replies
View Related
Jul 5, 2011
I got Thunderbird 5.0a2 Beta because it had the file that runs it in there, but I can't find it anywhere in the Firefox Nightly Build one. There's also no config file in there either, and I don't want to replace my Aurora 6.0a2 Beta with the very unstable Alpha until I try it out. I would try it in the Virtual Machine but it'd take too long to set it all up.
[URL]
I downloaded the .bz2 file and Archiver extracted it for me. I remember in Slackware you just use installpkg on .bz2 files... Or was it .gz... I forget, anyway, how can I run Nightly-Build? Run-Mozilla.sh opens my Aurora browser.
View 6 Replies
View Related
Mar 25, 2009
Today (25 of March) Fedora 10 asked to install latest security updates. I allowed it to install them and everything seemed ok. But after the next boot I understood that some applications won't launch. Skype, last.fm player, VirtualBox - all the qt ones. I've reinstalled those apps, and reinstalled qt. They still don't launch.When I execute one of them from terminal - it just waits and nothing happens.The process really starts, I can see it from ps -A and gnome's System Monitor.Here's the /var/log/yum.log for March 25th:
Mar 25 00:20:37 Updated: libX11-1.1.5-1.fc10.i386
Mar 25 00:20:39 Updated: lcms-libs-1.18-1.fc10.i386
Mar 25 00:20:44 Updated: gtk2-2.14.7-7.fc10.i386
[code]....
View 14 Replies
View Related
Mar 7, 2011
I downloaded TruCrypt but can't get it to launch.
View 2 Replies
View Related
Oct 9, 2010
So I activated the Firefox profile:
Code:
And restarted Firefox (even rebooted), but it doesn't seem to be working. When I open Firefox I am able to perform a "Save Page As" in locations I shouldn't be able to, like my Desktop or Pictures folder.
The following command says the Firefox process is in enforce mode:
Code:
Of the following lines, the only directory which is "rw" is /Downloads, why am I still able to write to other places?
Code:
OS: Ubuntu 10.10
Can someone with an active Firefox profile do this simple test for me? Click File -> Save As and try to save somewhere the Apparmor profile shouldn't let you, and let me know the results.
View 9 Replies
View Related
Aug 18, 2010
I ran a test where I login a test user several times using the wrong password to see that he gets locked out after several attempts. Now that I got the test user locked out, how do I unlock the test user? I tried passwd -u <test user>, but it says passwd: Error (password not set?).
View 4 Replies
View Related
Apr 14, 2011
I recently came upon an ubuntu variant called blackbuntu. Its in early release stages at this point, but its being marketed as a pen test distro. Exactly like Back Track, but in Ubuntu form. Was just wondering if anyone has had a chance to use this yet? All software that the distro uses is readily avilable in the ubuntu repositories already.
View 4 Replies
View Related
Mar 2, 2011
Well someone has been putting up this attack on my game-server ports. For those of you who don't know what type of attack this is, so its an attack which is actually masked to us because the attacker uses his machine to send packets to a machine called source which reflects the packets to destination. Based on this, the UDP port under Flood at the destination starts making outgoing connections to that IP and gets rejected which uses up more than 5mb/second bandwidth instantly.
I've worked out on some security for this and now need a tool to test this against my machine. I've used PentBox but that's not really powerful to do anything. As I search Google, I find something called Trinoo but can't download or test it.
View 6 Replies
View Related
Sep 29, 2010
I know very little about MySQL, but I've got some users that need it for testing on a Linux server.So I had set it up a while back, but now I'm running into some small problems.Right now, each user has his own database that I created and can do whatever with it. Each user only sees their own database.I didn't want them to be able to create new databases at all, but they can and when they do anyone can see them.
EDIT(Apparently they can only create databases beginning with the word "test" in the name)
I need to either:
1) Stop them from creating new databases (without affecting their ability to interact with the existing database)
OR
2) Make it so that when they create a database, only they have privileges on it and only they can see it (except mysql root of course).
Anybody know the statement to set these kinds privileges up?
EDIT: pfft... I've a read a bit more and realize that this is an intended part of the installation.
EDIT2
I'd still like to remove the ability to make test databases.
EDIT3:Ok, for reference this is how you prevent users from making and using test databases:
shell> mysql -u root -p
Enter password: (enter root password here)
mysql> DELETE FROM mysql.db WHERE Db LIKE 'test%';
mysql> FLUSH PRIVILEGES;
View 4 Replies
View Related
Jan 27, 2011
I need to do a pentest on a Microsoft IIS webserver to test the efficiency of the HIPS i have installed on. methods to simulate attacks so that i can check if the HIPS will detect them?
View 4 Replies
View Related
Feb 12, 2011
I have been trying to use my DS2490 USB to serial device with a Maxim .DG1921G thermocron with owfs. It is supposed to give me access to a virtual file system for the thermocrom without needing to launch owfs as root.
Code:
/var/log/messages gives:
Feb 8 16:22:45 norman-HP-G56-Notebook-PC kernel: [ 236.140141] usb 5-1: new full speed USB device using ohci_hcd and address 2[code]....
but if ds2490 module is loaded it works when run sudo.It seems from this that it is a lack of permissions to USB but I have tried all the methods on at http://owfs.org/index.php?page=udev etc. to overcome this and a few others but none work.I am running Ubuntu 10.10 kernel 2.6.35-22-generic #33-Ubuntu SMP
View 1 Replies
View Related
Apr 8, 2009
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
View 1 Replies
View Related
Mar 15, 2010
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
View 1 Replies
View Related
Mar 26, 2011
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies
View Related
Jan 18, 2011
I would like to know if provisions for cryptographic algorithms, especially things like digital signature of packages/applications etc are a native feature of any linux package installer/package manager.
Another question is: Do all linux based systems natively support cryptography? if yes, what engines do they use? Do they all use openssl or do they use high level java based engines like Harmony(Apache) or Bouncy castle?
I have an ubuntu 10.10 and I know openssl support is already provided. However I want to know if any system level program actually uses it or not.
View 2 Replies
View Related
Mar 27, 2010
Please take a looka at:
Code:
hihihi100@hihihi100-laptop:~$ sudo apt-get install tor tor-geoipdb
Reading package lists... Done
[code]...
View 2 Replies
View Related
May 30, 2010
I can't seem to find the setools-gui package in the repo, and I do not see a deb package for it.I attempted to use alien to install the rpm, but that didn't work. Any idea on how to get the GUI to install?
View 2 Replies
View Related
Jul 21, 2011
I'm interested in GNU/Tiger as recommended by a security guru I know. I did apt-cache search and located the package tiger:Code:tiger - Report system security vulnerabilitiesI also checked the ubuntu web-based package search and found tiger there too along with things like this signed message.Using apt-cache policy, I see this package is universe. I'd like to check the signature/cert/keys of this file before running apt-get install on it to see if it is acceptable given my current apt keys. Can someone explain how to do this?Also, what happens when I try to install a package using "apt-get install" and that package or one of its dependencies is:* unsigned* signed, but not by anyone whose key resides in my apt keyring?
View 3 Replies
View Related
Mar 12, 2009
I'm logged in as root and want to run Add/Remove Software (Package Installer) but get the message telling me
Code:
Running graphical applications as a privileged user should be avoided for security reasons. Package management applications are security sensitive and therefore this application will now close.
How must I install applications? Surely the world is getting paranoid with all this hackers and viruses, because with every new version O/S, the security features gets more and more; up to the point that you can't fricken do and play around with your pc as you would.
View 2 Replies
View Related
Jan 2, 2011
I was planning to re-install ufw. When I selected it and then install in Synaptic Package Manager a box appeared saying ufw was not authenticated.
View 2 Replies
View Related
Nov 26, 2010
The iptables has every rule set correctly, the users in the subnet works great, but I have the following issue.every user connect to a mysql running on the internet through the port 3306, the forward and masquerade do the job. Now I have a user in the outside, and he wants to connect to a mysql in a certain machine (Not the gateway), prerouting rules solve my problems, but all the packages from the inside users goes now to that certain machine. I would like something like if the package passed trough masquerade don't pass trough the prerouting rule, and if it come from the outside (Not a package that come from a petition from the inside) pass trough the prerouting rule.
View 6 Replies
View Related
Feb 27, 2011
I have a Cent OS dedicated server, not sure what version though as I'm new to Linux. How do I find out what version I have? Is there an anti virus or security package that I can install on my server which can use Cron Jobs to do a scan every 12 hours.
View 7 Replies
View Related
Dec 2, 2014
How do I generate sql result into xml ? Tried this way (shown below), but it generates all data into single column.
Code: Select allgenerate_xml()
{
f1=_tmp1
f2=_tmp2
cat $SQL_QUERY_OUT |sed -e 's/^"//g;s/"$//g;s/","/|/g'|tr '|' ' ' > $f1
[ -e $SQL_QUERY_OUT ] && rm $SQL_QUERY_OUT
[code]....
View 2 Replies
View Related
Jul 3, 2010
I have an Ubuntu Linux on a VMWare running and I've installed RPM Package Manager. However when I try to query all packages using the rpm -qa command, I don't get any results returned.
View 2 Replies
View Related
