SUSE :: Install This Tar.bz File?
Jul 16, 2010./configure
make
sudo make install
[code]...
ADVERTISEMENT
OpenSUSE Install :: Getting Suse To Rewrite The Config File?
Sep 3, 2010I have a question during a new kernel compilation (I made a backup of my .config) file) However I ran into issues during the make oldconfig process and unfortunately I issued a make clean followed by a mrproper which cleared my existing .config file.
Since I have a backup of my previous .config file is there of restoring without changing the permission rights to file?
-r--r--r-- 1 root root 27754 2010-09-03 22:39 /proc/config.gz
SUSE / Novell :: Open Suse 11.2 Install Grub Entry For Chainloading Ubuntu?
Jul 20, 2010I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
SUSE / Novell :: Install A D-Link Access Point On Suse 11.0?
Sep 16, 2010how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedSUSE / Novell :: Can't Get Suse To Install On The Prepared 20gb Partition?
Aug 23, 2010I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
SUSE :: Install Virtualbox On Suse Enterprise Desktop 11?
Mar 18, 2010I was tryin to install virtualbox on Suse Linux Enterprise Desktop 11 and it said it needs pad-devil. I looked in the software archive that came with sled 11 but it wasnt there. I tried downloading the VirtualBox install for Suse Linux Enterprise Server but got the same error as when i tried install VirtualBox with the opensuse 11.1 rpm file. can virtualbox even be install on sled? (has anyone done it?) and if so where can i find pam-devil?
View 1 Replies View RelatedSUSE / Novell :: Cannot Install Python On Open Suse 11.2 586?
Feb 1, 2010I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
OpenSUSE Install :: Custom Build From Suse Studio|missing "initrd-2.6.34.7-0.5-default" File?
Dec 2, 2010If you can access Suse Studio here is thlink to the buildLFS Host - SUSE GalleryGoogle hasn't been friendly and neither has a search on these forums, I don't know which man to read so a finger in the right dirrection (preferably not the middle) would be nice as far as that goesRight now the yast live installer trips up at %84 while saving the boot loader configuration and displays a popup that says �An error occurred during initrd creation. /sbin/mkinitrd: illegal optionI then press enter to acknowledge the message and the installation continues without a hitch.
When I go to boot up (no other os installed) grub says it cant find the file initrd-2.6.34.7-0.5-defaultIf you boot the live cd again you can mount the boot partition and you�ll find a broken symlink called initrd that islooking for the missing file above.Like I said above, if it an obvious fix, all I need is some direction, I don't mind reading. (been doing that all day)If you need more specifics Id be happy to supply, I'm just not sure whats relevant and don't want to bloat the post.
OpenSUSE Install :: Can`t Install Suse 11.3 - Every Time System Shut Down In Install Process
Jan 30, 2011I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
OpenSUSE Install :: Open Suse 11.3 Along With Win 2008 R2 OS - Error "Win2008 R2 Is Not Supported In Open Suse Installer"
Mar 6, 2011I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedSUSE :: Can't Get The SuSE Install Right?
May 19, 2010I'm having reeeal trouble doing this My hard drive has 2 partitions - One NTFS (W7) and the other unallocated for the Linux install. I boot using the SuSE install DVD and install to the empty partition, finish the install, reboot and it boots to SuSE (which looks very nice, I must add), but it's corrupted the W7 MBR. I get all my stuff back in W7 but I'm a little stumped as to why I can't get the SuSE install right.
It's something small but I don't know what it is. I have a tiny bit of experience in Linux but not much.
Also, I'd like to load W7 as default with the option of loading SuSE, which I beleive this needs some editing of the GRUB boot loader, but I don't know how to do this.
OpenSUSE Install :: Install Suse Alongside An Existing Install?
Apr 18, 2010i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
SUSE :: File Creation For Web Application?
Dec 2, 2010Am using apache and php to build a web application and am trying to create the file outside my working directory but its not creating Anybody knows what is the solution for this
View 4 Replies View RelatedOpenSUSE Install :: Suse Install Formatted User Data
Sep 11, 2010I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:
[Code].....
Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.
This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.
OpenSUSE Install :: How To Re-install Suse On A Dual Boot System
Oct 22, 2010Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedSUSE / Novell :: Zypper Install Gdb - Does Not Install The Latest Version Of GDB
Dec 29, 2010OpenSuse 11.2 This link shows that gdb-7.2-61.1.x86_64.rpm is the latest version of GDB, but when I do: zypper install gdb, the version 6.8.x gets installed! The following result is after forceful refreshment:
Code:
linux-uitj:/home/anisha # zypper repos
# | Alias | Name | Enabled | Refresh
--+-----------------+-----------------------+---------+--------
1 | KDE:KDE3 | KDE:KDE3 | Yes | Yes
2 | X11:lxde | X11:lxde | Yes | Yes
[code].....
SUSE :: Writing To Log File Affecting Performance
Apr 8, 2010I have 3 c files(one of them forks out 5 instances) all writing to one log file. Now to avoid the confusion of opening and closing in each application or instance and running into a situation of not having closed a file I decided to open and close the log file inside the log function for each write.
So what I do currently is fopen, flock, fwrite, unlock, fclose for each write. All the log messages from all the files get written fine and there are no errors but I see a performance hit. The applications talk to each other using SHM(shared memory). So when I try to set a timer and check number of messages lets say I get X messages. Each time I remove or add a log call the number of messages changes. When it is a 1 sec or 5 sec timer it doesnt make a very big diff..few hundreds but when I check it over a longer period..every log call added decreases 1000 messages in count. So I want to know what is an efficient way of implementing the custom log across the application.
SUSE :: Oracle Installation - No Such File Or Directory
Jun 17, 2010Trying to install Oracle 11g on SLES 10 Xen virtual server. Get error /proc/sys/vm/hugetlb_shm_group: No such file or directory. I agree, it's know there...but how do I create it?
View 2 Replies View RelatedSUSE :: Encrypted Root File System On LVM
Jul 12, 2010I try to encrypt root file system on Opensuse 11.1 and I have found up to two possibilities.
1. [url]
2. [url]
In the first case, i have a Problem with entering password, for each partition on encrypted disk, i must enter my password.(For 3 partition 3 times)
And in the second version to get i nowhere.
Code:
SUSE :: Unsquashfs The File System Of A Distro?
Dec 20, 2010im trying to unsquashfs the file system of a distro that i made in suse studio.
when I run the unsquashfs comman it give my that error "Can't find a SQUASHFS superblock on mylinux-read-only.i686"
seems that this is not a sqhuashfs FS
what kind of file system could be?
how I can descompress it?
OpenSUSE Install :: Install Suse On My PC - Boot From CD-rom Does Not Work
May 23, 2010I have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
View 2 Replies View RelatedOpenSUSE Install :: Cannot Install Suse - Does Not Recognize My CD/DVD Device
Jul 13, 2010I built a new pc and want to have Suse again. Unfortunately Suse installation does not recognize my CD/DVD device. So I boot from DVD select installation and a few moments later there's a popup 'make sure cd number 1 is in your drive'. I also did try to load other kernel modules but nothing helps. The only drive which is always recognized is floppy drive.
Here are some details about my system: Asrock P55M Pro board, Intel P55 chipset, 2 SATA HDD's, IDE NEC 2510 DVD writer, BIOS is set to AHCI due to Windows.
I tried following:
Use Suse DVD 11.0, 11.2, x86 or x64
Set BIOS to AHCI, IDE (compatible), IDE (enhanced)
DVD writer NEC was used in my former pc and did install 11.0 without probs.
Installing from HDD is new to 11.2 thus I copied the DVD to a directory. During Installation I can select the correct partition but suse is not able to find repositories.(?)
OpenSUSE Install :: Install Suse 11 - Without Distrubing Windows 7
Oct 23, 2010I have installed windows 7 in my laptop. i have only c drive with a memory space of 284mb. now i like to install suse 11 in c drive itself without distrubing windows 7. after installing i should be able to go for either windows 7 or suse 11 easily. i must have the both. I had partitioned windows 7 in fat. i had not use ntfs.
View 1 Replies View RelatedOpenSUSE Install :: SUSE 11.4 ISO Disk Install Fails
Mar 23, 2011Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies View RelatedOpenSUSE Install :: Suse 11.4 Install App Crash Error ?
Mar 28, 2011I am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
OpenSUSE :: Access Windows File System From Suse?
Aug 27, 2010I am using 11.2 suse with gnome in vmware player on windows 7. I can drag and drop indivisual files from windows to suse and vice versa but Can I mount the whole windows file system in Suse.
View 5 Replies View RelatedOpenSUSE Network :: File Transfer Suse To Windows?
Jan 30, 2010I am currently running Windows Xp with service pack 3 and OpenSuse 11.0 (i586) on the same machine on separate hard drives. here are the specs on the machine. (Note: it is only a single core machine. I have no idea why both Suse and Windows say it is dual core as the processor was bought and installed months before dual cores went on the market.)
OS Information
OS: Linux 2.6.25.20-0.5-default i686
Current user: telknor@linux-l3e2
System: openSUSE 11.0 (i586)
KDE: 4.0.4 (KDE 4.0.4 >= 20080505) "release 15.4"
[Code]....
Now on to my problem. About a year ago I had to wipe my Windows drive and backed up about 32 GB of stuff from it to my OpenSuse drive. I did this from the Suse OS using Dolphin. In fact I can see, open, change, delete, modify layout, and move stuff around on the Windows drive all day long from Suse. I can as I said pull stuff over to the Suse drive from Windows drive while in Suse and save to Suse drive. Now I have need of the stuff that was moved but Windows does not see the Suse drive for what it is. Just says 'unknown partion type' gives size in GB and ignores it otherwise. From Suse if I try to move stuff back to the Windows drive it starts to transfer then stops and tells me it does not have permission to access the destination drive, folder, or location depending on how I tried to save it to the Windows drive. Adding new hard drives to the system does not help and the external 1 TB drive we have Suse can see it but will not do anything with it. The thumb drives on the other hand Suse does not have a problem with. It will open, read, and write to them all day long. Suse will not access the network to dump files to the network file server and it does not see any other systems on the network not even the ones running the same OS. I want to do the following:
1. Move the Windows files from the Suse drive to the Windows drive in same machine or to the network file server (also a windows machine)
2. Move all the Suse files to another machine running same Suse OS.
3. Wipe the Suse drive in this Machine so that Windows can use it.
OpenSUSE Network :: File Sharing Between Two SuSE Boxes
Apr 29, 2010I want to share files between my desktop box and my laptop either by my mains-LAN or by ethernet cable and cannot find anything on the forum to point me in the right direction. There is plenty of information to help with the installation of Apache/LAMP and the like. But is this what I need? Will I need to create logon IDs to the desktop to share files (and even the printer?).
View 9 Replies View RelatedSUSE :: Rsync Displaying Stale NFS File Handle
Aug 10, 2009When using rsync to copy from one NFS mounted filesystem to another mounted NFS, rsync displays "stale NFS file handle" while attempting to issue a chmod after each file is copied. The files appear to be written successfully but the owner and group show up as "99." The source file system is mount USB ext3 drive and the target is a Buffalo TeraStation TS-XL/R5.
View 6 Replies View RelatedSUSE :: Get File Descriptor From Major And Minor Number?
Nov 15, 2010Is it possible to get a file descriptor from the major and minor number. If so, how can this be done? I am trying to see if a port(eg ttyS2) is opened without using the fdopen or open or fopen functions. is there a way to get the file descriptor of file or port that as already been opened, without using the functions I mentioned above. These functions reopens the port. I am trying to avoid that.
View 3 Replies View Related