OpenSUSE Install :: Getting Suse To Rewrite The Config File?
Sep 3, 2010
I have a question during a new kernel compilation (I made a backup of my .config) file) However I ran into issues during the make oldconfig process and unfortunately I issued a make clean followed by a mrproper which cleared my existing .config file.
Since I have a backup of my previous .config file is there of restoring without changing the permission rights to file?
-r--r--r-- 1 root root 27754 2010-09-03 22:39 /proc/config.gz
View 4 Replies
ADVERTISEMENT
Jan 20, 2010
i tried installing suse 11.1 on sony vio with config core2duo, 512 DDR2 ram n 80gb HDD and got th following error . being a newbie dont what the problem is.
View 6 Replies
View Related
Mar 5, 2010
I am creating a raid10 for our studio. I just realized after creating the filesystem that I would like modify one of the parameters - the blocksize. My original command:mkfs.ext4 -b 2048 -L insightRAIDvol /dev/md0I know want:mkfs.ext4 -b 4096 -L insightRAIDvol /dev/md0Is it ok to just issue this command even though a filesystem already is in place?I am hesitant to try this without knowing what the ramifications of this might be for the superblocks or some other unknown parameter to me that might cause problems in the future.As well I know I could rebuild everything from scratch but that's a day and a half of rebuilding
View 3 Replies
View Related
Dec 13, 2010
I have simple blog I created myself. I am using mod rewrite to redirect all to a php file. But I have links in google like [URL]
How can I match it with regular expression? I try with variants of ^([^/?]+)/$ but with no success.
The desired result is to redirect such addresses to [URL] or to 301 page
View 7 Replies
View Related
Dec 2, 2010
If you can access Suse Studio here is thlink to the buildLFS Host - SUSE GalleryGoogle hasn't been friendly and neither has a search on these forums, I don't know which man to read so a finger in the right dirrection (preferably not the middle) would be nice as far as that goesRight now the yast live installer trips up at %84 while saving the boot loader configuration and displays a popup that says �An error occurred during initrd creation. /sbin/mkinitrd: illegal optionI then press enter to acknowledge the message and the installation continues without a hitch.
When I go to boot up (no other os installed) grub says it cant find the file initrd-2.6.34.7-0.5-defaultIf you boot the live cd again you can mount the boot partition and you�ll find a broken symlink called initrd that islooking for the missing file above.Like I said above, if it an obvious fix, all I need is some direction, I don't mind reading. (been doing that all day)If you need more specifics Id be happy to supply, I'm just not sure whats relevant and don't want to bloat the post.
View 1 Replies
View Related
Feb 26, 2010
i am trying to get this rewrite using a text file to work but it seems not to pick up the text or read it the way i want. here is what is happening i want to merge 2 domains .com and .net into one vhost file and one website. but the .net has alot of redirects which i want to put in a txt file bacuse there are over 200 line of redirects static.also exclude the robots.txt file. and i want the rule to look for any string be it after the first slash of with the url like so
[URL]
should use the map text file and rewrite.
txt file example
wsd/html/aboutus.html /aboutus
wsd/html/aboutus.htm /aboutus
wsd/html/aboutus.php /aboutus
[Code]....
View 1 Replies
View Related
Mar 3, 2011
I have a cd containing wifi drivers, but inside is a config.mk file and no configure file. so when I tried to install the tarball using ./configure it could nt find anything. so I tried using su - then I said sudo ./config.mk and it said bash error I don't have premission and it referenced the sudoers file. I not sure what this means, and am I even installing the right file for the driver I need. there is also already a Makefile in the folder as well....
View 2 Replies
View Related
Apr 18, 2011
I am just configuring my PC for learning php. If I install phpMyAdmin from rpm, it works however if I download it manually and put in /home/user/public_html/phpMyAdmin and then browse [URL], I just see a blank page. What is the reason?
View 7 Replies
View Related
May 6, 2010
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies
View Related
May 17, 2010
Now, I use Fedora Core (version 8) with core linux OS 2.6
I have some file data with size about 2G and I want to burn (write) this file to DVD rewrite.
I know linux OS can install software to burn data to DVD, but I don't have permission to install more software. I only use command line over Terminal (Gnome Terminal).
View 4 Replies
View Related
May 7, 2011
I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
View 1 Replies
View Related
Jun 21, 2011
i have a dell studio 1536(service tag: d4tw6h1). when i install opensuse 11.3 and 11.4' the os don't confiig my usb port and can,t access to usb port. i haven't this problem when use xen kernel.
View 1 Replies
View Related
Jul 9, 2010
I installed fbpanel with sudo aptitude install fbpanel, but I can't find the config file. according to the readme it's suppose to be under ~/.config/fbpanel/default, but it's not there. Where else can it be? I did a whereis fbpanel and it's located in a few areas, but no default config file is there!
View 3 Replies
View Related
Feb 23, 2011
I am trying to install wxsqlite3-2.0.2 on my Debian machine. I have installed wxGTK-2.8.11 in the folder: /home/mrj2/wxGTK-2.8.11
When I run the wxsqlite3-2.0.2 configure script, a problem arises due to the fact that wxGTK is expected to be in a specific directory. The wx-config file cannot be found. However, there are copies of these files for each type of build in the folders:
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseMacUnicode
There is not a problem with my wxGTK installation as I use it in DialogBlocks and it works fine.
View 2 Replies
View Related
Jul 16, 2010
./configure
make
sudo make install
[code]...
View 3 Replies
View Related
Jul 2, 2010
I have a SUSE Linux Enterprise Server 10 (i586) server that is dying (I think the disc is about to crash). I want to save all the installed software and all the configurations.
To know what software is there installed, I use "rpm -qa > outlist.txt".
But what files shall I (scp) copy ... to take away as much configuration files as possible ?
Let's start with "/etc/*.conf", of course ... but is this enough ?
The server basically runs a DHCP server and a DNS server
View 1 Replies
View Related
Jan 30, 2011
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
View 3 Replies
View Related
Apr 26, 2010
I am unable to find any documentation on the purpose of the unique setting. Does anyone have a clue what it does and how I assign my secondary interface one?
BOOTPROTO='none'
BROADCAST=''
IPADDR=''
[code]....
View 1 Replies
View Related
Jul 4, 2010
I have a Dell Inspiron 5160 with a volare xp5 video card (only recently supported under linux most linux distros and OpenBSD)Thus far I have done graphics install of KDE based on 11.2 and -- froze end of install and at at the logon / splash screen dueing the reboot could not get to a successful run level 3 text logon. (commandline was vga=x317, I think if n ot it was closeInstalled gnome using text install -- first boot (vga=normal - (default from install)) succeeded at configuring X and started gnome.
I really want KDE so I tried again Text install == hung near the end of the install after printers -- I assume trying to configure XRebooted no command line parameter at all ( no vga=) -- hung at login password screen (blank)Rebooted again with -- vga=normal 3 -- and got a text mode login prompt and successfully logged in -- now I can not find the page that talks about sax2 configuration from run mode 3. This video card needs to be set for VGA I think maybe vesa at 1024X768 16 colors (I succeeded at this under OpenBSD)I believe if necessary I can probably successfully edit the x config file but I would like to try the recommended approach first (as a non-root user as recommended) -- can anyone direct me to that page I cannot find again. It discussed 11.3 x config recovery with a section at the bottom for 11.2 and earlier
View 3 Replies
View Related
Sep 25, 2010
I just re-installed 11.3 KDE. I kept my old /home directory on a USB drive. Now I would like to replicate my panels. Where are the desktop config files kept?
View 7 Replies
View Related
Nov 27, 2010
Well, I decided enough of the "cute" OSs and installed OpenSuse 11.3 as my sole OS.
I have installed three times today. The install goes well, no issues there, however, after the install, I run Updates and once that's complete, I reboot and that is where the trouble starts.
The first 2 times, (I installed with Auto-magic Login enabled) all I could get was a black background and what the Mac community calls the "spinning wheel of death". Well since I automatically logged in I could not determine if it was a System issue or a Profile issue, hence the re-install.
I first thought it was a kernel update problem, but hey, the system boots, so that didn't seem logical.
I had on this install had it happen also, but I (thankfully) was able to graphically login as root and delete my /home/jj/.config and /home/jj/.gconf (going by previous experience with a similar issue on other OSs).
I notice that after the install and during the update that my Desktop Effects turned themselves off. I know this because Docky tells me so when I run it. Another issue is I run kmahjongg or kbounce (Wife's Games) and the TitleBar is missing so this forces me to (re)run metacity --replace to get WM handles back.
Everything is stable at the moment, but I hesitate to reboot the system.
I have logged out and back in with everything being retained.
View 9 Replies
View Related
Mar 6, 2011
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies
View Related
Jul 28, 2010
I want to install opensuse 11.3, and I get a newer computer to install it(X64), but every time I install, I have been stop at "saving bootloader config" (96%). I have waited for a long time, but no use.
View 9 Replies
View Related
Oct 17, 2010
I'm looking to extract a config from a working kernel..that much was pretty easy..all ya gotta do is "cp /proc/config.gz ." which will put it in whatever directory you're currently in and then do a "gzip -d config.gz" to get the config file.
Now...after that it gets a bit tricky..Linus says you should never compile a kernel in /usr/src/ because those header files in ../include should never change. He says you should extract a new kernel gz in your home directory and compile it there. I tend to agree (who am I to argue?). Anyway..whereever your sources are this is where you need to copy the config file...
Like this...my home dir is "/home/dart". So I would put the kernel sources there under "/home/dart/linux". I would cd to /home/dart/linux and do "cp /proc/config.gz ." then "gzip -d config.gz" which should leave you with a file called "config", then "mv config .config"
Now here's where I run into a problem..when I do "make xconfig" I get this...
Tried to install the qt3-devel packages from CD but guess what? I ran into cdrom errors which is what I was trying to fix in the first **** place...catch 22 eh?
View 5 Replies
View Related
Aug 27, 2010
I am using 11.2 suse with gnome in vmware player on windows 7. I can drag and drop indivisual files from windows to suse and vice versa but Can I mount the whole windows file system in Suse.
View 5 Replies
View Related
Jan 30, 2010
I am currently running Windows Xp with service pack 3 and OpenSuse 11.0 (i586) on the same machine on separate hard drives. here are the specs on the machine. (Note: it is only a single core machine. I have no idea why both Suse and Windows say it is dual core as the processor was bought and installed months before dual cores went on the market.)
OS Information
OS: Linux 2.6.25.20-0.5-default i686
Current user: telknor@linux-l3e2
System: openSUSE 11.0 (i586)
KDE: 4.0.4 (KDE 4.0.4 >= 20080505) "release 15.4"
[Code]....
Now on to my problem. About a year ago I had to wipe my Windows drive and backed up about 32 GB of stuff from it to my OpenSuse drive. I did this from the Suse OS using Dolphin. In fact I can see, open, change, delete, modify layout, and move stuff around on the Windows drive all day long from Suse. I can as I said pull stuff over to the Suse drive from Windows drive while in Suse and save to Suse drive. Now I have need of the stuff that was moved but Windows does not see the Suse drive for what it is. Just says 'unknown partion type' gives size in GB and ignores it otherwise. From Suse if I try to move stuff back to the Windows drive it starts to transfer then stops and tells me it does not have permission to access the destination drive, folder, or location depending on how I tried to save it to the Windows drive. Adding new hard drives to the system does not help and the external 1 TB drive we have Suse can see it but will not do anything with it. The thumb drives on the other hand Suse does not have a problem with. It will open, read, and write to them all day long. Suse will not access the network to dump files to the network file server and it does not see any other systems on the network not even the ones running the same OS. I want to do the following:
1. Move the Windows files from the Suse drive to the Windows drive in same machine or to the network file server (also a windows machine)
2. Move all the Suse files to another machine running same Suse OS.
3. Wipe the Suse drive in this Machine so that Windows can use it.
View 6 Replies
View Related
Apr 29, 2010
I want to share files between my desktop box and my laptop either by my mains-LAN or by ethernet cable and cannot find anything on the forum to point me in the right direction. There is plenty of information to help with the installation of Apache/LAMP and the like. But is this what I need? Will I need to create logon IDs to the desktop to share files (and even the printer?).
View 9 Replies
View Related
Nov 23, 2010
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies
View Related
Jun 29, 2010
Install problem: no acceptable C++ compiler found in $PATH (Trying to install freeciv, game) ... checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether the C++ compiler works... no configure: error: in /home/peter/Download/freeciv-2.2.1': configure: error: no acceptable C++ compiler found in $PATH See `config.log' for more details. Other threads suggest install gcc which I thought I already did yet it didn't solve the problem!
View 9 Replies
View Related
Apr 19, 2011
No more than 15 hours after a breezy installation and setup I somehow managed to stop the desktop manager from displaying. Once you boot into Suse, the loading bar goes across, a white flash, then a blank screen forever. I figured it was KDM once I booted into x11safemode and tried to boot the desktop manager, it recreated the situation.
I've tried un-installing and installing KDM again, however it seems to reuse the same config file. I'm thinking about deleting the config file mentioned, but I'm not sure what will happen when I install the desktop manager, if there's any setting up to get it to work with my setup, or even if that will fix the situation.
View 3 Replies
View Related
