I working with open suse 11, and i have to create a proxy server using this O.S, so i bought a encore ENL832-TX-EN (an ethernet card), but suse didn't find the drivers, i read many documents and visit forums, but i can't do it.
I try this:
apt-get dist-upgrade
#make all
#insmod ./sundance.ko (or sundance.o)
#ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
eth0 is your network adapter,use dmesg to check it, ex: eth0, eth1...
xxx is your ip address, ex: 192.168.102.211
yyy is your netmask address, ex:255.255.255.0
that is from the notes in the cd that comes in te box with the card, but when i typed "make all", a error appers, something like doesn't exist, so I typed : " apt-get install build-essential linux-headers-$(uname -r)" (because I found it in some forum), then this: " apt-get install build-essential linux-he", and that didn't work, I did many this like:
"sudo apt-get update" and went to yast and look up for c/c++ demeloment (installing everything about it) and all about apt updates...
I'm a network administrator and I have to cut the internet access to some network users. I would like to do that by installing a proxy server on a F10/F11/F12.
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory. Don't know what is missing.
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter ddns-update-style interim; ignore client-updates;
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
I need to restrict access to the internet and keep unwanted software out of LAN with 45 workstations at the school I teach at. I thought about configuring a proxy and firewall on SuSE 11.4?
What I want to do is to share the internet connected to a computer with a telephone, over another telephone which is permanently connected to the pc.The thing is, that some guys found a way of making this on windows, in fact, I already set it up on xp and works like a charm, it involves configuring in a certain way the telephone, and to use 2 programs. One is CCProxy, which redirects the internet connection to the telephone, and another one, which updates the IP adress of the telephone connection to dyndns, so that I can put that adress on my second telephone as proxy, and this way, surf on the net through my home internet on the telephone anywhere. Tricky right?
Now, the thing is I don't like at all booting windows only for sharing internet with my telephone. So I want to do it in linux. I use Ubuntu and Puppy linux home.I tried setting up the connection to the modem with wvdial, and... I got connected! But hey, when I connect to the telephone, I lost my internet connection (main, cable based, the pc connection) :-S. I mean, somehow, the "active" connection for the browsers and all the internet programs is now the connection I have made with my telephone, which is plugged to the computer.Now my objective here is that NO CHANGE of active connections get done when I start the connection to the phone, and then, get a program like CCProxy, and a dyndns updater for sharing the internet connection on the pc, to the connection made on the telephone-modem wired to the computer.
Is there a way to create a cache repo so when we update all our machines in Ur school, ones one of the machines do the update, all the other machine in our network will have the updates from the cache server.
I have a project that I'm working on now that is using Ubuntu 8.04LTS to create a reverse SSH proxy for a telnet process. We have the box logging in with RSA keys so that it can automatically connect to the SSH host on our end. We are using autossh to keep the connection up and running.
We have rolled out 3 of these and they are working very well. We ghosted the original, changed the hostname, changed the IP info, and regenerated the SSH keys. Now I need to clone 35 more. I want to try to do this as efficiently as possible and can script the changes in the hostname, IP, ect.
Can I batch create RSA keypairs on my workstation and then copy them over as a part of the batch? My current other option is to login to each of them and generate the pair. I would like to just install the drive and ship it and not even have to boot it up.
I am running memory test on SUSE, Memory test is just writing some patterns into a memory and reading it back in all CPU threads. After a while, when memory test is running in the background , I am trying to reset the system by echo b> /proc/sysrq-trigger command, Upon SUSE warm reset , I am seeing some UNCORRECTABLE MEMORY ERROR in model specific register (MSR : 0x421),
I am seeing this behavior on one of my server which has huge amount of memory.,Have you ever seen this UCECC error when SUSE generates warm reset when memory test in the background ?
Does anyone know what is the best open source proxy solution out there? What we need out of the proxy are the following: Access Control - There should be a web interface for managers to login and create proxy user ID's for external people Good password complexity requirement Lock down the allowed websites
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I'am denis from indonesia,i need some help to create installation suse 11 a laptop. i have 3 partitions in my laptop. 1st partition for windows 2nd. for Data and 3rd for film. i want to use 1st partition for linux suse only. how to make it.
Ok, so I have installed openSUSE 11.3 on my Lenovo Thinkpad T61p, setup the wireless adapter (why is this so difficult?) and installed a few applications. I do like the look of openSUSE but would like to check out a few other flavours. With my Windows 7 (can I say that here?) machines I can create a system image and a system restore CD with a fair amount of ease. Is there a similar process available for Linux?
I want to creat a new repository on my openSUSE. As the root, i typed zypper addrepo and i had some options. My problem is, how do I specify the name of my new repository. Which commands should I use
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
i'm trying to create a database with the mysql that came with the suse installation, my problem is that i can't get mysqladmin to work it spits out this: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysql/mysql.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysql/mysql.sock' exists! So I'm stuck at square one php info() seems ok with the installation and the installed client connects to my remote DB ok. I checked the server with ps -ef | grep mysqld and I get the following:
Which doesn't really mean a lot to me but looks ok, anyway my question boils down to does anyone have any obvious ideas of what I'm doing wrong or is, as others have hinted, suse's mysql installation is broken?
I would like to create a Suse 11.3 Live CD with Acronis on it so that I can boot from any computer, use Acronis, and still have some Linux commands available to me. Is this possible? I could part with OpenOffice.org to provide room for Acronis.
I currently have Acronis selectable in my grub menu, and it runs from my hard drive.
I need to create a user account for a software developer. I am logged in as an administrator and was planning on using the 'useradd' command to add the developer. Where should I place his folder in the directory hierarchy?He will need to access the gcc compiler to do his development.
I am trying to set up a home network but I am having a slight problem. The network is reported as being open and active but when I click on the Windows network icon a dialogue reports that " unable to mount location, failed to retrieve share list from server. What have I missed. I have tried other distros such as PClinuxOS and that connected automatically so there is no physical problems with my wired network. My Workgroup is MSHOME and my host is Home1.
I am working on SUSE 9 Server in which I am trying to make folder transferdata under /opt folder but it is throwing an error mkdir: cannot create directory `transferdata': Permission denied
I am running SLES10 SP2 under z/vm in z9 mainframe box. But I believe this is a linux problem instead of hardware architecture or visualization (Because previously it worked).
I was trying to create a new user account for ftp purpose. However I encountered the following error from YAST code...
I bought a web hosting account(cPanel) and I want to create my own name server(ns1 and ns2.mydomain.com). So when I want to host addon domain, I can point them to my name server instead of hosting company name server.
Scenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
