SUSE :: URL Link Launcher Creation / Unable To Resolve Hostname
Aug 6, 2010
I am updating all of the company systems from Novell SuSE Desktop 10 SP2 to 11. We have several links on the desktops of users that are URL's. In version 10, I just did a Create Launcher, Type was Link and I could type in a URL. The LINK type no longer exist. I checked on my system at my desk which is OpenSuSE 11 and it also does not have the link type. I have been searching on the Internet for creating Launchers and then looking for information on creating links and have not been able to find anything. Can anyone point me to a good howto or document on creating URL link launchers (we have a system that runs Apache and from the users PC they click the link to connect to the server). I tried just creating a bookmark in Firefox and then dragging the bookmark to desktop and customizing icon. But, I build the systems at our corporate offices, and when I build, the IP address on the system is the actual IP and since it is not at the final location it can not connect, and the bookmark creation on desktop fails with error 'Unable to resolve hostname'
View 1 Replies
ADVERTISEMENT
Aug 1, 2010
i searched the internet on how to resolve IP to hostname in my internal network. However, i could not find any solution to it. Any gurus around have any knowledge on this? i have tried whois, dig and nslookup however it doesnt give me anything.
View 1 Replies
View Related
Feb 28, 2010
I have squid on my RHEL5 server and a no of windows clients ,on clients some sites opened without any error but some sites whilw opening says unable to resolve hostname ,why this kind of problem ?This may be DNS problem ,but it should happen for all address not some .
View 2 Replies
View Related
May 25, 2010
I just built out an Ubuntu Server 10.04.
My problem is setting the hostname. I cloned the machine, then normally on the clone, I would change the /etc/hostname and /etc/hosts file.
However, when I do this, upon restart, I get the message, "init hostname main process (some process number) terminated with status 1"Then, when the machine finally boots, the hostname is set to (none). Literally has braces like: user@(none):
I've tried: sudo hostname machine_name but it says can't resolve hostname (none).
I've Google'd around a lot but can't get it. It may have something to do with 10.04? I have been using 9.04, 9.10 with no problems.
eric@(none):~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
code....
View 9 Replies
View Related
Apr 30, 2010
I got my server set up with 10.04, and with everything installed: DHCP, SSH, Samba, VBox, etc.
DHCP, SSH work fine, but I am having problems where I cannot ping the hostname of the machine.
It worked for a few minutes after I got everything installed and now it's not letting me connect via hostname. I can connect fine if I use the IP address. I cannot ping the machine by hostname unless I add it's IP address to the hosts file.
View 7 Replies
View Related
Jun 16, 2010
I AM USING rhel4. and having openoffice1.1.5. . Now i have installed OOO3.2.1 . BUT I AM UNABLE TO FIND THE LAUNCHER PROGRAME FOR OOO3.2.1. IS THAT soffice.so ? it is not in /opt/openoffice3.2/.
View 1 Replies
View Related
Jan 16, 2010
I have a question about the ln command for link creation. I have both Windows and Linux partitions on my system. While I'm working on linux, sometimes I need to access the data stored on my windows partition. Yet, the access is provided through /media directory and I often, I have to click on several folders in order to access windows "My Documents" folder. So, in order to avoid this, I decided to create a link to "My Documents" folder directly from my $HOME directory.
Code:
$ mkdir /home/dariyoosh/MyDocuments
$ ln -fs /media/disk/Users/dariyoosh/Documents/MyDocuments/* ./MyDocuments
The link was created without any problem and now I have a direct access to that folder just by a click. Yet, there is a problem. If I update any file of the windows MyDocuments folder within this linking directory, the file is actually updated on the windows partition, which is of course what I want to do. But If I decide to create a new file on the windows "MyDocuments" folder by using this linking folder, that is, /home/dariyoosh/MyDocuments, the file is put actually on the linux partition instead of the windows MyDocuments folder. So, having created a directory linking to another directory, is there any way to proceed so that any file operation, in particular, creation, affects directly the linked directory?
View 3 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Apr 18, 2011
So I recently upgraded from Debian 5 to Debian 6 and now for some reason I cant SSH into my server FROM my server. All of the following fail with the same error:
[URL]
They all come back with: ssh: Could not resolve hostname 127.0.0.1: Name or service not known. I never actually tried this before upgrading so I'm not sure if its caused by the upgrade, but I would like to get this fixed. Also, ping with all of the above hostnames fails as well. I can SSH in from other computers and I can SSH out from the server. For whatever reason, I cant SSH from the server to the server though.
View 4 Replies
View Related
Sep 8, 2010
I got an application deployed on Websphere Application Server on SUSE Linux V 10. We are accessing the application using the IP address in the URL. Please let me know how to configure the DNS, so that we can use the Host name in the URL and the Host name is automatically mapped to the IP address.
View 1 Replies
View Related
Mar 3, 2010
I have two computers.
Computer A = windows 7.
Computer B = Ubuntu Server 9.10
Computer B automatically receives an IP address from my router.
I can ping computer B from computer A using the IP address. I cannot ping computer B from computer A using its hostname.
My router did not show a hostname under it's active clients table. After some searching I found a threat where somebody suggested modifying /etc/dhcp3/dhclient.conf and adding 'send hostname "blahblah"' This allowed me to see the hostname in my router but I still cannot resolve it from my windows box.
View 9 Replies
View Related
Jan 7, 2011
I have a weird problem since yesterday that I can't solve. I can't ping / ssh my machine anymore using its hostname... says "unknown host", "network unreachable". I have no idea why - it used to work perfectly. I can still ping / ssh using the IP so it must be a problem of hostname not being resolved.
I have a dynamic IP (I'm at work...) but that doesn't seem to be the problem - network manager automatically adds a line in /etc/hosts with <mycurrentip> <hostname> (I checked, it's indeed the IP given by ifconfig and that I can use to ping/ssh).
2nd question: Another computer has a similar problem but slightly different: the hostname is resolved but points to a wrong IP (seen in ping or nslookup), different from what ifconfig returns. As a result, ping times out and ssh says "no route to host".
View 9 Replies
View Related
Nov 8, 2010
I've a fully working openvpn network but it works only using ip address.Clients should comunicate each other thought the server. To semplify the managment of clients I'd like to use their hostname instead their ip. there are a way to achieve it?Now openvpn assign ip address to the clients, but if is needed I can install other software on the server, it's a Debian machine.
View 4 Replies
View Related
Nov 21, 2010
I am using a Dell Latitude D610 that is a few years old, and running Fedora 13. I do not think hardware is too relevant to my problem, nor is it an issue with my OS itself. I do not dare perform an upgrade to Fedora 14 at this point because this is an active work machine, for school use. To the heart of the problem, I am extremely irritated by the erratic behavior of Epiphany Browser (and just an hour ago, Midori). If I open more than a few pages at once (e.g. ctrl-clicking a bunch of Google search results) more often than not I get a chain of "cannot resolve hostname" blank tabs.
Oddly enough, I refresh the pages (one by one, of course - I don't know how to mass refresh) and they load properly! The problem is more prominent on Wikipedia - most articles have images embedded here and there amongst the text. When I visit the page, none of these show up - the page loads, and after I see the blue mercury-looking progress indicator shoot to the end, the spaces where the images should be are blanked and in the centers lie a little thumbnail of a grey photo with the corner turned up - e.g. generic-can't-show-the-image.
This is remediated by visiting wikimedia.org or refreshing the article itself, whereupon the images fall into place. The problem seems to carry over into Midori browser, which I installed a few hours ago just to use as an alternative - I say "had" because just now, the problem resolved itself. I strongly suspect that it has to do with my changing my cache size from 169 MB to 13 MB, which I did just now. That issue is now trivial; next question: Google Docs behaves very strangely in my browser. Whenever I make a normal alphanumeric keystroke, it shows up fine; but "backspace" and "delete" and "enter" are both doubled.
I double-space between my paragraphs by accident and when I make a mistake in my typing I often suck myself into a cycle of mistakes. E.g. "Polanrd" --> "Polan" --> "Pol" --> "Pold" (hitting backspace twice to trim off "rd", but Google Docs redoubles the keystrokes into four backspaces and I end up taking off too much and adding the lone "d" in the wrong place). The problem shows up to a lesser extent in the built-in chat, wherein backspace is not affected, but every time I hit "enter" my chat appears twice (as though I had hit enter twice).
View 6 Replies
View Related
Dec 22, 2009
I have a very simple setup
router DIR 100 4 ports
adsl connected to WAN
Linux connected to port 1
Mac connected to a port 2
I am trying to figure why linux hostname is not detected in my LAN. The strange thing is that my macs hostname is automatically detected and put in DHCP CLIENT LIST! I have scrolled the whole manual 10 times.
My Linux (Slackware 13) gets IP address automatically by DHCP server in router. Has anyone had this problem with routers in general?
Output from router DIR 100:
View 2 Replies
View Related
Dec 2, 2010
Am using apache and php to build a web application and am trying to create the file outside my working directory but its not creating Anybody knows what is the solution for this
View 4 Replies
View Related
Aug 22, 2010
I am currently facing one issue with my network. I have several computers and this is what happens, everything works fine when I use the ip address, but when it comes to hostname.
-Windows computers can't ping/see the computer 5 (while it is running linux), but they can see computer 3 while running ubuntu 8.10 and computer 2 while on Mac OS X.
-computers 2 and 3 can see/ping everybody while on Mac/Linux.
-computer 5 can ping everybody.
-computers 1, 2, 3 and 4 (on every OS) can see/ping computer 5 while on windows xp.
Basically, the problem is with computer 5, it can see, but it is not seen by other computers (just when running ubuntu lucid)Computer 5 is supposed to be a printer server, so it must be seen by the others regardless of OS.When I ping computers 5 the TTL is 64, when I ping other computers, TTL is 128. I don't think this means anything, but I am not sure.Initially I thought this was a printer issue, but then I realized is something related to network when I tried to use ping/explore the computer 5 by ip/hostname (it works by ip, but not by hostname).Computer 5 is sending the hostname to the router properly, it appears in the dhcp client list.
View 7 Replies
View Related
Sep 24, 2009
I am trying to mount a NAS device using the hostname on my linux computer (running slax)
The command I am using is
mount //hostname/sharename /mnt/test -t smbfs -o username=***,password=***
i am getting back the error
mount error: could not find target server. TCP name hostname/sharename not found
No ip address specificed and hostname not found
I can do this mount from an older version of SLAX but i can't from this new version. smb:/ can find then through the file explorer window but I can't mount them from the command line.Is there something i am doing wrong?
View 1 Replies
View Related
Feb 1, 2011
Is there away to resolve the hostname after creating a new subdomain. So we don't need to wait internet need some times to able to resolve the hostname. For example, if I add new subdomain to "test.example.com", I can directly ping to this hostname from internet.
View 3 Replies
View Related
Apr 13, 2011
We are creating PDFs from different sources using PHP, Zend_PDF class and Zend server (based on apache2). Developping on windows the PDFs are OK. If we deploy the application on testing server running SuseLinux the special characters ( ) don't show. We use 1 of the standard fonts, HELVETICA and have tested without success COURIER.
The system
Do you have an idea what to do or try?
OK - it turned out to be a coding question. I had thought that some system variable might cause the problem but we simply had to clean the input data and got it working.
View 1 Replies
View Related
Feb 8, 2010
I got this setup:
- Asus M2N32, Athlon X2, 4G Ram, Raid 5
- dom0 on lvm, boots always
- tried to create a domU using dirinstall
- creating a volume lamp in group VGsys with 5G and ext4
- mount /dev/VGsys/lamp /var/tmp/dirinstall
- yast dirinstall: fails when calling dirinstall_finish
- tried to create a domU using vm-install
- creating a volume lamp2 in group VGsys with 5G and ext4
- vm-install fails too
- tried to make an image on susestudio, successfully, but that does not boot, failing when trying to mount the rood partition
- copied the dom0 image to a domU disk
None of these domU booted sucessfully, all of them showed the following messages:
- kernels used 2.6.31.8 and kotd 2.6.31.12 give same results
I am told to disable scsi subsystem in the kernel, I have compiled a kernel before, but
1) I cannot believe I am the only one having this issue or I miss something truely obvious (then what do I miss, please?)
2) dirinstall and vm-install worked in 11.1, there were issues, but recoverable, why now not in 11.2?
View 1 Replies
View Related
Jun 11, 2010
Any attempt to load a webpage gives a Cannot Resolve Hostname error. i can ping [URL], but cannot load the page. However, the page will load by typing its IP address [URL] I have been trying to figure this out for days. cat /etc/resolv.conf nameserver 192.168.1.254
View 9 Replies
View Related
Oct 31, 2010
Cannot connect to internet via Firefox or Midori on my Dell Inspiron 8200 laptop with a Netgear wireless card. However, I can update via yum, I can ping google from the CLI, I can ssh to my desktop, I can point a browser to find my router which /etc/resolv.conf points to, but can't get a browser to resolve hostname. I'm posting from a different machine (desktop), here is my /etc/resolv.conf:
[Code]....
View 14 Replies
View Related
Apr 30, 2010
I can reach other hosts by means of their global addresses by either the IP address or hostname (that has the global address). What I want to (also) do is have a hostname that references the IPv6 link local IP address (an AAAA record in DNS, or just the fe80::<whatever> address in /etc/hosts) and use that host name in commands to access that host. The problem is, an interface ID is needed when making such a reference.
It sure looks like the programs just pass the host name string on to the resolver library, which does not understand the significance of the '%' even though it could find and see that the name preceding the '%' is consistent with that being an IPv6 link local address (e.g. the logic could have been "split at first % and see if preceeding name is found as a link local address and accept that if so, or ignore the split otherwise" ... but it isn't). Is there a different syntax for this ... or was it overlooked in the design of programming around IPv6?I want to be able to address a host by its link local address, while still using a mnemonic instead of having to type the IPv6 address.
View 1 Replies
View Related
Aug 19, 2011
Evolution has balked at every webaddress I've thrown at it: Example: Code: Could not connect to imap.google.com (port imaps): Host lookup failed: imap.google.com: Name or service not known same thing happened for smtp as well as the canonical names provided by nslookup.
I was able to succeed in connecting my email finally by using the IP provided by nslookup, but still am unable to get my google Calendar to connect: Code: Cannot open calendar: Unexpected HTTP status code 2 returned (Cannot resolve hostname (www.google.com)) No proxy settings configured in Evolution or Fedora and none needed. Lemme know what else I can provide.
View 6 Replies
View Related
Oct 15, 2009
As the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
View 14 Replies
View Related
Aug 13, 2010
I configure a Linux Suse 10 box, added static IP, DNS (resolv), gateway (routes) but I am not able to ping other servers by name but nslookup works and the server can navigate on internet check below the problematic server is server-host20
Code:
Other server can ping that server by name just fine
All my network information by the way my server can ping DNS server by name just ok and as you see nslookup works.
Code:
View 3 Replies
View Related
Jul 25, 2009
to something else, how do i accomplish such a task?Have mounted a second drive as /data and changed ownership and then created a launcher on the desktop all is functioning well although i would rather it resemble a folder.
View 3 Replies
View Related
Nov 17, 2010
I've been running 10.04 since September on my new MSi i3 notebook and about two weeks ago I noticed that when I login after system boot, propagation of icons on my desktop and the content of my Panel have become slower and slower.If I logout and login again the propagations are not slow.
View 1 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
