Is there away to resolve the hostname after creating a new subdomain. So we don't need to wait internet need some times to able to resolve the hostname. For example, if I add new subdomain to "test.example.com", I can directly ping to this hostname from internet.
View 3 RepliesCannot connect to internet via Firefox or Midori on my Dell Inspiron 8200 laptop with a Netgear wireless card. However, I can update via yum, I can ping google from the CLI, I can ssh to my desktop, I can point a browser to find my router which /etc/resolv.conf points to, but can't get a browser to resolve hostname. I'm posting from a different machine (desktop), here is my /etc/resolv.conf:
[Code]....
I have read a lot of documentation but it is still hard to find a proper answer to my doubts.About the hostnames in a domain, how is it associate to a determinated port?
For example, when I type on the browser webmail.sparc86.net and then I get redirected to the port of 20000 of this same domain. Fine, but how does it work that it knows it should be redirected to the port 20000? From where is this information (the association webmail-port 20000) taken? The apache will manage this, right? But what about other services like ftp?Another example, If I wrote my own software listening, let's say on the port 40000 and I want to have a domain like "mystuff.sparc86.net" how would I let it be redirected to the port 40000 ?
I've a fully working openvpn network but it works only using ip address.Clients should comunicate each other thought the server. To semplify the managment of clients I'd like to use their hostname instead their ip. there are a way to achieve it?Now openvpn assign ip address to the clients, but if is needed I can install other software on the server, it's a Debian machine.
View 4 Replies View RelatedI have squid on my RHEL5 server and a no of windows clients ,on clients some sites opened without any error but some sites whilw opening says unable to resolve hostname ,why this kind of problem ?This may be DNS problem ,but it should happen for all address not some .
View 2 Replies View RelatedThere's this domain, that is apparently a cname of a cname which is, I know, not recommended, but it's not forbidden by the rfc. The domain is [URL]. If I try with windows or bind dns I get this results in nslookup:
** server can't find [URL]: NXDOMAIN
but if I try with opendns I have some results.
> [URL]
Server:208.67.222.222
Address:208.67.222.222#53
Non-authoritative answer:
www.groenegordel.becanonical name = www.vlaamsbrabant.be.
www.vlaamsbrabant.becanonical name = waf.vlaamsbrabant.be.
Name:waf.vlaamsbrabant.be
Address: 193.53.37.42
With this I see it's a [URL] it's a cname or a cname. Is there a way to force bind to resolve this domain? Is this a limitation of bind?
I have an RHEL5 server running BIND. I'd like to be able to resolve internal, non-FQDN names such as "wiki" for the company internal wiki. in my named.conf file...Named-checkzone returns no errors, and nslookup works when specifying the server explicitly, but no browser resolves the name when entered in the address line. I know this by no means a standard use of BIND, but I'm sure someone out there's pulled this off. I did see when googling someone suggest "load the root zone (.) as master, and add your "hosts" as TLDs, using CNAMEs", but tried that and probably did it wrong since it didn't work.
View 1 Replies View RelatedAs the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
venturing into unfamiliar territory so I'm hoping someone can help me and make things a little more understandable for me. I have setup Postfix on a standalone server connected directly to the internet. I have got inbound and outbound email working for the most part, but I am worried about security.My fear is that if I leave port 25 open to the outside world spammers will find this and start relaying mail through it and eventually blacklisting the IP attached to this box.
For now, I am hosting mail for a single domain and single user (me) with a few aliases. I plan on expanding to IMAP and SMTP access from the outside at some point, but for now I've been using Mutt in a shell and it's fine for my needs for now.
Here are my current Postfix settings:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]....
So I recently upgraded from Debian 5 to Debian 6 and now for some reason I cant SSH into my server FROM my server. All of the following fail with the same error:
[URL]
They all come back with: ssh: Could not resolve hostname 127.0.0.1: Name or service not known. I never actually tried this before upgrading so I'm not sure if its caused by the upgrade, but I would like to get this fixed. Also, ping with all of the above hostnames fails as well. I can SSH in from other computers and I can SSH out from the server. For whatever reason, I cant SSH from the server to the server though.
I got an application deployed on Websphere Application Server on SUSE Linux V 10. We are accessing the application using the IP address in the URL. Please let me know how to configure the DNS, so that we can use the Host name in the URL and the Host name is automatically mapped to the IP address.
View 1 Replies View Relatedi searched the internet on how to resolve IP to hostname in my internal network. However, i could not find any solution to it. Any gurus around have any knowledge on this? i have tried whois, dig and nslookup however it doesnt give me anything.
View 1 Replies View RelatedI have two computers.
Computer A = windows 7.
Computer B = Ubuntu Server 9.10
Computer B automatically receives an IP address from my router.
I can ping computer B from computer A using the IP address. I cannot ping computer B from computer A using its hostname.
My router did not show a hostname under it's active clients table. After some searching I found a threat where somebody suggested modifying /etc/dhcp3/dhclient.conf and adding 'send hostname "blahblah"' This allowed me to see the hostname in my router but I still cannot resolve it from my windows box.
I have a weird problem since yesterday that I can't solve. I can't ping / ssh my machine anymore using its hostname... says "unknown host", "network unreachable". I have no idea why - it used to work perfectly. I can still ping / ssh using the IP so it must be a problem of hostname not being resolved.
I have a dynamic IP (I'm at work...) but that doesn't seem to be the problem - network manager automatically adds a line in /etc/hosts with <mycurrentip> <hostname> (I checked, it's indeed the IP given by ifconfig and that I can use to ping/ssh).
2nd question: Another computer has a similar problem but slightly different: the hostname is resolved but points to a wrong IP (seen in ping or nslookup), different from what ifconfig returns. As a result, ping times out and ssh says "no route to host".
I am using a Dell Latitude D610 that is a few years old, and running Fedora 13. I do not think hardware is too relevant to my problem, nor is it an issue with my OS itself. I do not dare perform an upgrade to Fedora 14 at this point because this is an active work machine, for school use. To the heart of the problem, I am extremely irritated by the erratic behavior of Epiphany Browser (and just an hour ago, Midori). If I open more than a few pages at once (e.g. ctrl-clicking a bunch of Google search results) more often than not I get a chain of "cannot resolve hostname" blank tabs.
Oddly enough, I refresh the pages (one by one, of course - I don't know how to mass refresh) and they load properly! The problem is more prominent on Wikipedia - most articles have images embedded here and there amongst the text. When I visit the page, none of these show up - the page loads, and after I see the blue mercury-looking progress indicator shoot to the end, the spaces where the images should be are blanked and in the centers lie a little thumbnail of a grey photo with the corner turned up - e.g. generic-can't-show-the-image.
This is remediated by visiting wikimedia.org or refreshing the article itself, whereupon the images fall into place. The problem seems to carry over into Midori browser, which I installed a few hours ago just to use as an alternative - I say "had" because just now, the problem resolved itself. I strongly suspect that it has to do with my changing my cache size from 169 MB to 13 MB, which I did just now. That issue is now trivial; next question: Google Docs behaves very strangely in my browser. Whenever I make a normal alphanumeric keystroke, it shows up fine; but "backspace" and "delete" and "enter" are both doubled.
I double-space between my paragraphs by accident and when I make a mistake in my typing I often suck myself into a cycle of mistakes. E.g. "Polanrd" --> "Polan" --> "Pol" --> "Pold" (hitting backspace twice to trim off "rd", but Google Docs redoubles the keystrokes into four backspaces and I end up taking off too much and adding the lone "d" in the wrong place). The problem shows up to a lesser extent in the built-in chat, wherein backspace is not affected, but every time I hit "enter" my chat appears twice (as though I had hit enter twice).
I have recently downloaded and installed ubuntu 10.4, and I am finding it impossible to connect to the Internet.
I connect to the Internet through an Ethernet cable. My university (Tuebingen, Germany) provides the Internet through this server:
http://10.196.128.11/upload/custom/green/welcome.html (English link).
When I open my browser in windows vista (I have a duel-boot system), my browser (Firefox) automatically goes to this page, and I log in, and am able to then use the Internet.
Ubuntu also searches for this 10.196.128.11 server, but it continually states "waiting for server to respond". I have checked all the settings I could find in windows and compared them to the ones in ubuntu, and they seem to be identical to me. I am using firefox in ubuntu too so I cannot understand the problem.
Centos 5, After switching out server to another provider the website responds as it should but the server is unable to establish connections to remote servers. Yes the internet connection is fine, I'm actually working on the server remotely.
--- 4.2.2.2 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 2999ms
/etc/resolv.conf has opendns nameservers
nameserver 208.67.222.222
nameserver 208.67.220.220
search localdomain
and I've updated /etc/sysconfig/network to reflect the new IP address.
I just built out an Ubuntu Server 10.04.
My problem is setting the hostname. I cloned the machine, then normally on the clone, I would change the /etc/hostname and /etc/hosts file.
However, when I do this, upon restart, I get the message, "init hostname main process (some process number) terminated with status 1"Then, when the machine finally boots, the hostname is set to (none). Literally has braces like: user@(none):
I've tried: sudo hostname machine_name but it says can't resolve hostname (none).
I've Google'd around a lot but can't get it. It may have something to do with 10.04? I have been using 9.04, 9.10 with no problems.
eric@(none):~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
code....
I am currently facing one issue with my network. I have several computers and this is what happens, everything works fine when I use the ip address, but when it comes to hostname.
-Windows computers can't ping/see the computer 5 (while it is running linux), but they can see computer 3 while running ubuntu 8.10 and computer 2 while on Mac OS X.
-computers 2 and 3 can see/ping everybody while on Mac/Linux.
-computer 5 can ping everybody.
-computers 1, 2, 3 and 4 (on every OS) can see/ping computer 5 while on windows xp.
Basically, the problem is with computer 5, it can see, but it is not seen by other computers (just when running ubuntu lucid)Computer 5 is supposed to be a printer server, so it must be seen by the others regardless of OS.When I ping computers 5 the TTL is 64, when I ping other computers, TTL is 128. I don't think this means anything, but I am not sure.Initially I thought this was a printer issue, but then I realized is something related to network when I tried to use ping/explore the computer 5 by ip/hostname (it works by ip, but not by hostname).Computer 5 is sending the hostname to the router properly, it appears in the dhcp client list.
I am trying to mount a NAS device using the hostname on my linux computer (running slax)
The command I am using is
mount //hostname/sharename /mnt/test -t smbfs -o username=***,password=***
i am getting back the error
mount error: could not find target server. TCP name hostname/sharename not found
No ip address specificed and hostname not found
I can do this mount from an older version of SLAX but i can't from this new version. smb:/ can find then through the file explorer window but I can't mount them from the command line.Is there something i am doing wrong?
Any attempt to load a webpage gives a Cannot Resolve Hostname error. i can ping [URL], but cannot load the page. However, the page will load by typing its IP address [URL] I have been trying to figure this out for days. cat /etc/resolv.conf nameserver 192.168.1.254
View 9 Replies View RelatedI got my server set up with 10.04, and with everything installed: DHCP, SSH, Samba, VBox, etc.
DHCP, SSH work fine, but I am having problems where I cannot ping the hostname of the machine.
It worked for a few minutes after I got everything installed and now it's not letting me connect via hostname. I can connect fine if I use the IP address. I cannot ping the machine by hostname unless I add it's IP address to the hosts file.
I am updating all of the company systems from Novell SuSE Desktop 10 SP2 to 11. We have several links on the desktops of users that are URL's. In version 10, I just did a Create Launcher, Type was Link and I could type in a URL. The LINK type no longer exist. I checked on my system at my desk which is OpenSuSE 11 and it also does not have the link type. I have been searching on the Internet for creating Launchers and then looking for information on creating links and have not been able to find anything. Can anyone point me to a good howto or document on creating URL link launchers (we have a system that runs Apache and from the users PC they click the link to connect to the server). I tried just creating a bookmark in Firefox and then dragging the bookmark to desktop and customizing icon. But, I build the systems at our corporate offices, and when I build, the IP address on the system is the actual IP and since it is not at the final location it can not connect, and the bookmark creation on desktop fails with error 'Unable to resolve hostname'
View 1 Replies View Relatedwhat is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View RelatedThe little home server of mine has bind configured as a caching dns server. I would like to configure it to resolve local host names. I know dnsmasq can do this, so what would someone need to do to get bind to do this?The network is entirely private with all private IPs which are distributed by dhcpd.(While writing this, the feeling creeps in that it would be easier to just have dnsmasq running.)
View 2 Replies View RelatedEvolution has balked at every webaddress I've thrown at it: Example: Code: Could not connect to imap.google.com (port imaps): Host lookup failed: imap.google.com: Name or service not known same thing happened for smtp as well as the canonical names provided by nslookup.
I was able to succeed in connecting my email finally by using the IP provided by nslookup, but still am unable to get my google Calendar to connect: Code: Cannot open calendar: Unexpected HTTP status code 2 returned (Cannot resolve hostname (www.google.com)) No proxy settings configured in Evolution or Fedora and none needed. Lemme know what else I can provide.
I cannot update directly via internet.Is there a way to do that manually
View 1 Replies View RelatedMy router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
View 1 Replies View RelatedI was trying out the fedora live cd but I couldn't get my Internet to work. When I open firefox it always said server not kind no matter what I searched or put into the address bar:
I tried many different things but none o them worked
I am able to ping m router an I'm able to login to my routers page
I am also able to login to my modems page and it says connected to the Internet
I tried restarting the modem and the router but I still got the same problem
I also tried disabling the firewall but still had the same problem
I tried a command and I was able to receive packets from google.com, but It never went through in firefox
I also tried out a torrent (I had it saved on a USB) and it worked it was downloading fine
I am able to ping googles web page but I am not able to search anything.
In firefox preferences and in network proxy I tried many different proxy settings bit none o them worked I always get the message server not found. All this was done while connected directly with Ethernet cable modem and router but untried wireless and it didn't work either on the top right corner of the screen the network icon says auto eth0 active. I'm using fedora 12 livecd.
I recently installed F13 on my Toshiba Satellite C650. It has a buggy ACPI which no linux distro till date supports. I got that covered though. But my problem is that the ethernet port works only if the kernel is >=2.34. But F13 came with 2.33.
I do not have an access to a wireless network. Please tell me how to update the kernel without connecting to internet directly. I am new to Fedora. I have been using Ubuntu for some time and this can be achived in ubuntu by downloading the DEB packages and dependencies.