SUSE / Novell :: Installed Gpg2 On 10 - Package It And Install On Other Box?

Nov 23, 2010

I have downloaded tarballs of gpg2 (gnupg-2.0.16), compiled it, compiled dependencies etc. and have it installed on my Suse 10 box. Now I want to install it on another suse 10 box. Instead of doing the compiling/installing steps once again, is there a good way I can package gpg2, or tar it on my server, so it can be easily installed on the other server? Also, when I installed gpg, it was installed everywhere, /usr/local/lib, /usr/local/bin, my download dir etc. How do I pick the needed libraries and executable to make the package? maybe I Should specify a path for the gpg to be installed, then tar the whole directory. how to do the first part?

View 1 Replies


ADVERTISEMENT

SUSE / Novell :: Install OpenSuse 11 64bits On A Box Already Has 32bits OpenSuse Installed?

Nov 23, 2010

I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?

View 7 Replies View Related

SUSE / Novell :: Boot An Installed System From The Rescue DVD?

Oct 23, 2010

There was an option in openSUSE about booting an installed system if grub is deleted from the MBR. This option is no longer available and there is no option for automatic recovery. For these reasons, I want to boot an installed system from command line. I know how to mount the root partition where openSUSE 11.3 is installed, but how to proceed?

View 3 Replies View Related

SUSE / Novell :: Bluez-utils Package Does Not Seem To Be Available From The Official 11.2 Repo?

Mar 26, 2010

I used to share my internet connection for my palm via bluetooth dund on opensuse 10.1. Now I upgraded to opensuse 11.2, and have been trying to configure the same for 5 hours, without success. The problem is: dund seems to be in bluez-utils, but this package does not seem to be available from the official opensuse 11.2 repo. It is available from an unofficial one, but that is version 3.x and it conflicts with the version 4.x package of bluez. So, I either have bluez 4.x or bluez-utils 3.x, whilst I would need both.

Is there a solution for this problem, or any other way to share internet via bluetooth? (All previous howtos seem to be rendered useless with the recent "developments" of bluez, but, hey, file sending to my palm still works to some extent, so, there is much room for more "developments" until bluetooth is rendered completely unuseable).

Edit: In a changelog at a RedHat site, I found that the bluez-utils package was integrated into the bluez package, and later some tools like dund were split out into a bluez-compat package. Maybe the same happened to bluez in opensuse, too. But I have both the bluez and the bluez-compat packages installed, and hcid and sdpd are nowhere. Where did they disappear during the very important re-organization of bluez tools?

Edit2: Kind of solved. Hcid was renamed to bluetoothd, and probably the other tools and config files changed names, too. Old howto's are in fact useless, and I am about to sacrifize my next days in order to become a blootooth expert just to configure this wrecked internet sharing.

View 2 Replies View Related

SUSE / Novell :: Yast2 Can't Find ISCSI Package - Sort It?

Dec 23, 2010

yast2 matched nothing when I typed "iSCSI" in it. Can anybody give a help? My desktop is Dell precision T3500 workstation, it is installed with SLED 10.0, then for some software installation, I update its kernel to SLED 11(2.6.7). I see in many forum yast should be able to install iSCSI initiator very easy, but this doesn't work for me.

View 2 Replies View Related

SUSE / Novell :: 9 Updatedb And Locate Not Installed During Initial Installation?

Mar 8, 2010

I am trying to install the locate and the updatedb command as they were not intially installed during the desktop installation of linux. How do I do this

View 1 Replies View Related

SUSE / Novell :: Open Suse 11.2 Install Grub Entry For Chainloading Ubuntu?

Jul 20, 2010

I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has

ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8

[code]...

View 4 Replies View Related

SUSE / Novell :: Install A D-Link Access Point On Suse 11.0?

Sep 16, 2010

how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.

View 3 Replies View Related

SUSE / Novell :: Can't Get Suse To Install On The Prepared 20gb Partition?

Aug 23, 2010

I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.

I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.

View 2 Replies View Related

SUSE / Novell :: Cannot Install Python On Open Suse 11.2 586?

Feb 1, 2010

I tried to use different version of Python, and followed the Readme like this

./configure
make
make test

[code]...

View 3 Replies View Related

SUSE / Novell :: Installed Mplayer From Source But The Gui (gmplayer) Does Not Work - Command Not Found

Sep 7, 2010

i ran into a problem when i installed mplayer on suse 11.1 from source, it works just fine BUT it has no GUI.When i try to use the command "gmplayer", it returns 'bash: gmplayer: command not found

View 3 Replies View Related

SUSE / Novell :: Media Files Not Working In Opensuse 11.1 I586 Installed System

May 14, 2010

i hav a system which is never connected to internet. I had installed opensuse 11.1 from dvd.But the media files r not working. I had installed gstreamer all sets. And tried to install codecs using a .ypm file i downloaded from the opensuse server but not working without internet. I can download any files in other system and copy it to my system.

View 3 Replies View Related

SUSE / Novell :: How To Install GCC Version 3

Mar 22, 2010

I am using open suse 11.0 with gcc 4.3.2. I am compiling a program which requires libg2c. Where can I find libg2c and how to install it?

View 8 Replies View Related

SUSE / Novell :: OpenSUSE 11.2 Won't Install Fully?

Mar 15, 2010

So I have tried to install from LiveCD and from a LiveUSB stick. Installation goes fine till I get to CUPS daemon. Then I get the wait 30 seconds for CUPS to activate, that never works. Then it pops up with a wait one minute for CUPS to become available. Then it finishes the installation and restarts the system and I get previous installation has failed would you like to retry? It does this over and over again till I get an error with my user name and the mouse and keyboard quit working. I have tried in Failsafe mode, No ACPI, etc. and nothing seems to work. I don't know if it matters but I have an Asus mobo M4A785-M and an AMD Athlon II x3 440 chip. I am just ready to switch to Ubuntu

View 14 Replies View Related

SUSE / Novell :: Which Partitions To Install 11.2 From LiveCD

Jan 22, 2010

I've an HDD with a dual boot of XP and Mint Linux. It works well. I'd now like to add OpenSUSE 11.2 but if I accept auto partition it seems to want to overwrite the Mint partitions which I assume are sda5 and sda8. So how should I proceed with manual install as I have the following large number of existing partitions:

[Code]...

Should I resize sda3? can I use sda8 as /Home for both Mint and OpenSUSE?

View 10 Replies View Related

SUSE / Novell :: Zypper Install Gdb - Does Not Install The Latest Version Of GDB

Dec 29, 2010

OpenSuse 11.2 This link shows that gdb-7.2-61.1.x86_64.rpm is the latest version of GDB, but when I do: zypper install gdb, the version 6.8.x gets installed! The following result is after forceful refreshment:

Code:

linux-uitj:/home/anisha # zypper repos
# | Alias | Name | Enabled | Refresh
--+-----------------+-----------------------+---------+--------
1 | KDE:KDE3 | KDE:KDE3 | Yes | Yes
2 | X11:lxde | X11:lxde | Yes | Yes

[code].....

View 4 Replies View Related

Server :: Install Novell SUSE Ver 11 From Different Computer DVD ROM Over Network?

Jun 23, 2010

Need to install Novell SUSE Linux version 11 from Different computer DVD ROM over Network.

View 1 Replies View Related

SUSE / Novell :: Cannot Install OpenSuSE 11.3 On My Toshiba Satellite Pro?

Sep 21, 2010

I have a Toshiba Satellite Pro laptop with the following specifications:Proccesor: Intel Core i3 350M / 2.26 GHzRAM: 4GB DDR3Hard Disk: 320GB SATA 5400rpmArchitecture: x86_64The computer has already Windows 7 installed on the C drive whereas there's a D hidden drive with a copy of the recovery image.I'm having trouble to install openSuSE 11.3 as follows:I boot the system with the DVD in its drive. After the welcome screen the process stops
using the typical GUI interface and runs a less graphical one. It is at this point where a
window pops up with a request:"Make sure that CD number 1 is in your drive"I press OK but the window keeps popping up. Frustrated I hit Back and a red window comes up with the message:"No repository found."I cannot go any further than this point

View 4 Replies View Related

SUSE / Novell :: Install Cuda Drives For Opensuse 11.2 64 Bit?

Mar 23, 2010

Can anyone provide a guide on how to install cuda drives for opensuse 11.2 64 bit?

View 1 Replies View Related

SUSE / Novell :: Install Usb Device In Linux Sese 10?

Jul 31, 2010

I have LG usb net setter, i want to install it on Linux Suse 10, anyone can give me the installation process for USB Netsetter.

View 1 Replies View Related

SUSE / Novell :: OpenSuse 11.2: Use Serial Mouse During Install ?

Dec 23, 2009

I'm installing OpenSuse 11.2 on some systems. Unfortunately the only mouse available is a serial mouse. Hence the installer doesn't recognize the mouse.And it is somewhat cumbersome using the TAB and ARROW keys to navigate the graphical installation.Does anyone know of a boot option I could use to get OpenSuse's installer to recognize a serial mouse ?

View 5 Replies View Related

SUSE / Novell :: 11.2 Install: GNOME Desktop Does Not Display

Jan 22, 2010

Installed Suse 11.2 from download CD. During the "answering questions" at the beginning of the process, selected Gnome as the desktop enviornment instead of the default KDE. The install process ended with no reported errors. After the final reboot at the process's end, the Gnome logon screen was displayed. After the user name/password were entered, a medium green screen was displayed, but the Gnome desktop was never displayed. The "animal" logo was not on the screen just the green screen and some "filagree" lines, probably part of the logo.

Waited a few minutes, mouse-clocked, pressed various keys and then tried ctrl-alt-del, but no response. Did a power off/on reboot, but the results were the same.

I then did a re-install. Took the KDE default for desktop. At install's end, the KDE desktop appeared and everything works just fine. During this second install, all choices were the same as for the first/Gnome install. Worked from written notes, and not from memory, so am sure that the change to KDE was the only difference.

Couldn't find any information on this anomally via forum and Google searches, hence this post.

This is my first time to use Suse, so could well have "missed something".

View 3 Replies View Related

SUSE / Novell :: How To Reclaim Partitions Grabbed By Failed Install

Jul 3, 2009

How to recover from a failed OpenSUSE install. The situation is that I have a striped RAID set up on two 500Gb drives running Windows. I wanted a dual boot setup, and I tried to install OpenSUSE but it failed with a Grub error 18. This, I understand, is caused by my BIOS not being able to access the part of the drive with the /boot on. Because I have two 500 Gb disks, the OpenSUSE /boot partition is beyond the BIOS's addressing range.

The recommended solution seems to be to put the /boot at the start of the HDD - but then I'd need to move Windows after it somewhere. But I don't know how to do that and it seems a risky, longwinded business. I've given up on the OpenSUSE install. My problem is that the failed install has grabbed about half of the diskspace for its purposes. Question therefore is: how can I reclaim that space for Windows?

View 1 Replies View Related

SUSE / Novell :: Install From Live KDE-CD: Insert Kernel-pae-2.6.34.7-0.2.2.i586 Possible?

Nov 2, 2010

I downloaded a live KDE-CD and will install from that on hard disk. My box has 4 GB RAM so I understand I need a *-pae kernel ("Physical Address Extension") to be able to use the memory fully.

Can I install the kernel e.g. from [URL] via YAST, or does it need other libraries / software as well and so the system becomes unstable, would anybody know?

View 9 Replies View Related

SUSE / Novell :: Install Fails To Recognize Ide Hard Drives

Aug 25, 2010

I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing OpenSUSE 11.1 onto the IDE drive. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive and boot from it). If I parse the dmesg output I see the message "ata_piix 0000:1f.1 device not available because of BAR 2 (0x0-0x7) collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.

I've tried Ubuntu with similar results. Older kernels WILL install onto this same MB/PATA controller (Ubuntu 6.06, 2.6.15 and RHEL4) so it seems that something changed in the ATA driver as the kernel has matured and my bios isn't up to snuff for these pickier drivers.

View 2 Replies View Related

SUSE / Novell :: Install Application In 11.2 - Doesn't Show Up In The List Of Apps

Aug 3, 2010

I'm trying to install kweather in 11.2. I have downloaded and installed. I can find it in usr/bin and usr/lib but I can't add an application as in 11 or 11.1. It doesn't show up in the list of apps. It's there but I can't get it on the desktop.

View 14 Replies View Related

Software :: Install GeForce 8600 XT Driver In Novell Open Enterprise SUSE 11?

Feb 9, 2011

I'm trying to install a GeForce 8600 XT card into novell Open Enterprise SUSE 11 so that I can get the 3D Cube to work. It currently does not work with the default nvidia card onthe motherboard.I can not find the correct driver for the GeForce 8600XT card. Can someone identify the driver I should be using please? Then if someone could also direct me to the "How to install a Video Driver" tutorial,

UPDATE:I've downloaded the correct drivers but it still says that my hardware does not support Desktop enhancements etc ... I think the GeForce 8600 XT just doesn't support 3D accelleration ... period.Can someone suggest a reasonably priced video card that is easy to install and which supports 3D Accelleration please?

View 1 Replies View Related

SUSE / Novell :: 1-Click Install ATI Driver For ATI X1950 Video Card Corrupts - 11.1

May 23, 2009

I have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.

View 4 Replies View Related

SUSE / Novell :: Multimedia CD-Rom Made For Windows 95/98/98 SE And 2000 Are Usable With Suse?

Nov 18, 2010

I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.

View 4 Replies View Related

SUSE / Novell :: Open SUSE 11.1 Mount Samba Share At Boot???

Jul 5, 2009

OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is

mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved