i have a wierd problem i have a couple of mp3 cd's and data dvds when i put the dvd into the drive , device notifier picks it up but does non of the options work . the mp3 cds are not detected at all . When i boot into windows xp all the discs work so i know its not the drive thats faulty .
View 2 RepliesI was trying to change the mounting point of a usb external drive from '/media/disk' to '/media/Movies'
Here is were the stupid part takes over... I right clicked on the desktop icon for the device and selected Properties. From there I selected the Volume tab and in there I changed the mounting point to '/media/Movies' It accepted it and said the changed would take place when I unmounted it and remounted it. However, when I did this it now says it cannot be mounted as it says mount_point contains invalid characters usually /
Unfortunately, now I cannot get back into the properties to remove my error.
So ive got a Suse server up and running. It is connecting to a clearcase server, so i want to mount the remote filesystem as part of startup, as this is generally rebooted when im not around.I would normally add something to /etc/init.d and put the shortcut to it in the appropriate runlevel (in this case 3). Tried that. Didnt work.
Realised the init script needed to have the LBS stuff at the start, so put that in, and used insserv to add the script. I used required-start set to $ALl.This successfully created the init script with S20, and i eneabled it with chkconfig.
for some reason/s in ubuntu 10.04 lucid i get the most sporadic and seemingly random results for mounting cd's or dvd's. most of the time they just don't mount and i have to reboot my computer and then they seem to mount. I've been reading the forums and there seems to be many, many many..... posts about this problem in 10.04 as it would seem many people are having issues relating to this.i've tried every thing i can think of to resolve it (although i'm still a bit of a newbie so that might not mean much to the advanced users out there). my system is up to date, i've tried the "boot up with cd/dvd in the drive option", switching my boot order in bios, adding a /media/cdrom0 dir and using mountmanager to automount that drive at bootup but none of these options work for me.
[code]....
my installation of 10.04 is a fresh install so i don't see why i should be having the fstab issue noted in the posts but maybe i'm wrong.
here's what
Code:
dpkg -l hal
returns
Code:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
[code]....
if there is someone's expertise that i can draw upon i would be most sincerely appreciative. in fact that is such an understatement having this issue resolved would be as amazing, for me, as the entire world suddenly becoming friends (...like in the non-facebook kinda way).
Havent got a clue why this started to happen recently, it says press S to skip or M to fix manually, i always skip adn everything is just fine, just would like to know why im getting this message and how to get rid of it
View 9 Replies View RelatedI don't know anything about Unbuntu I installed it because I had a virus and I didn't have a copy of windows. I have an extra HD with lots of media on it. At first it seemed to show up but then it disappeared. I did the sudo commands and the disk shows up as sdb. I have no idea what I am doing or what to do and all the guides keep talking about adding partitions and programs I have to dl from the net. This is a stand alone computer with no net connection.
View 2 Replies View RelatedFor some reason everytime I open nautalius or mount an external media showFoto launches, I tried looking at "Perferred Applications" but not seeing anything useful. I tried searching google and this site with a possible solution but no joy. I am using Fedora 14 with Gnome.
View 1 Replies View RelatedI want my usb disks to automount in /media as usual, but I don't want the internal partitions to be mounted there. The internal partitions are my business, and I'd like to install it ONLY where I want. I can disable the automount, but then the usb disks will not mount.
View 3 Replies View RelatedI want to disable automounting of removable media such as anything on USB, memory cards, and even eSATA. I do want the device node to be set up, but that's it.
View 3 Replies View RelatedMy linux mint while booting shows an error: An error occurred while mounting /media/6092-594B. There are two options : Press S to skip mounting or M for manual recovery. I have tried press S, but nothing happens.
Showing that code:
fsck from util-linux-ng 2.17.2
/dev/sda7: clean, 366872/2943360 files, 9301096/11765248 blocks
init: unreadahead-other main process (843) terminated with status 4
init: unreadahead-other main process (848 ) terminated with status 4
mount: /media//6092-594B not mounted already, or bad option
[Code].....
I have Suse 11.1 and am running a customized server on it that will take care of mounting/unmounting media (DVD, USB key, etc) on its own ..How can I get Suse to stop mounting the media automatically when I insert a dvd into the drive or plug in a USB key? I already got it to stop opening a window showing the contents, now need to get it to stop mounting automatically ..
View 5 Replies View RelatedI have installed suse linux on my desktop pc. I cant see the disk drives on which windows xp is load. How can I mount those drives so that I can see those drives in suse also. Also when I connect my usb drive, it is also not shown. I am new to linux. What are these commands to mount the other drives.
View 3 Replies View Relatedi am using Windows XP and opensuse11.0.Using wine i can open the firefox web browser (installed in windows) in Linux.It is working fine.But i am not been able to play any video from ...... It says
" Additional plug-ins are required to display .........."
I have flash player in windows and in Linux.
I came into this strange behavior related to mounting DVDs and/or CDs in SuSE 11.2 : after inserting a DVD intro the DVD unit, and mounting it through the "device notifier" applet, I find the disk mounted in /media under a folder named after the disk label (as expected) BUT ... the folder is in fact padded with blanks after the name found as label for the disk. For ex.: I have a DVD called DVD_ROCK2 The mounting is made in "/media/DVD_ROCK2 " (the folder created at mounting time in /media has 14 characters (if I counted them correctly) instead of the only 8 from the name of the disk This does affect my application "cdcollect", which crashes when it encounters a mounted disk which contains spaces in it's label.
I tried to adjust cdcollect, by modifying it's dources (trying to "trim" the name readed as disk-label, but with no results; anyway I am not good at C#, and even kinda hate this language, so... I'd prefer a solution coming from Linux's point of view: what changed in the mounting system from Suse 11.1 till now ? what can I do to change this way of mounting the disks ?I cannot state this happens with every single one of my DVDs; the ones wich are mounted this way are generally written in the same PC, in older versions of SuSE (11.0 and 11.1). Unfortunatelly, I had an older written disk (way back on SuSE 9.x) which does not behave this way (it is mounted in a folder with the name created exactly as the label is, without the padded spaces).
i have installed on a 8Gb disk /sdc solaris-2009.6 i cannot mount suse in solaris or solaris in suse. i have tried installing xfs and its supports. i want to copy the solaris installation to a partition in /dev/sdb
View 9 Replies View RelatedI added a second internal hard drive (/dev/sdb1) to a SuSE Linux system. I chose /home/users/STORAGE as a mount point. If I navigate to /home/users/ and right-click on the STORAGE directory and choose properties, I can see the amount of free space in the sdb1 partition of the second hard drive. Everything looks as I expected it to.However, if I choose the 'My Computer' option, click on home from there, which is where /dev/sda1 is mounted) and then navigate to STORAGE, the address bar in Konquerer looks something like this: da1:/users/STORAGEI might not have the format completely right but I do know that sda1 is listed at the beginning of the address. Yet if I copy files into this directory they end up in sdb1. Are there any issues with accessing the directory this way? When I right-click on STORAGE after navigating to /users/ through the My Computer page, the space used/available does not reflect the sdb1 partition.
A second question I have: On the My Computer page each mount location is shown in the top-right corner. The name of the new internal hard drive I added is displayed as "1TB media." That name is also a link to the mount point. How can I change this to something else? I would avoid using the My Computer page all together but there are many other people using this system and most of them know no other way to access thedirectorie
I have tried unsucessfully to enable automounting for my 40 GB External Hard Drive in Suse 11.1. I am aware that there should be a line added to the Policy Kit to enable this, but the issue is that all of these files are .xml format and I can't seem to open them for editing no matter what program I choose to open them. I have Device Automounter/Notifier Plasmoid and it shows the SD reader with card in it, but it does not show the USB external HD.
Is there any other way to change this so I do not have to attach this external manually every time I turn this computer on? All of my music rests within my external and it gets to be very annoying when you have to manually mount to listen to music all the time. I'm using Suse 11.1, KDE. The external is a 40GB HD from Seagate.
Every single time I try to watch streaming video in either Windows Media format or Quicktime format, I get an error that the proper codecs are not installed. I have installed the win32codecs at least ten times now (both from the repositories and from the codecs-kde.ymp one-click install) and still no joy. I had this running great before I upgraded from 10.2 to 11.1.
View 1 Replies View Relatedi have created a logical partition of FAT type where i have copied all my data.. i want to mount it i am using the following cmd:
mount -t vFAT /dev/sda7/mnt/data
but it is temporary mounting
i would like to do permanent mounting
I have SUSE 11.3 on an Acer Aspire 3620 (laptop). When it boots up, it gets stuck and doesn't complete the process. Can't use safe boot either because I can't get past the login- when I type the password, no keystrokes appear, regardless of the key I strike. Here's how I got into this situation and a little more description of the problem. After my laptop got some nasty bugs that damaged Windows XP so badly that I couldn't use the rescue disk (that I so obediently made per instructions), I bought several linux flavors on Live CD/DVD and decided to go with SUSE. I had been using the Live DVD for about a month and everything worked well so I installed it last weekend (SUSE only -no dual operating system). Everything went well for a couple of days and I even used Yast to get Adobe Flash. Then I plugged in my MP3 Player to recharge it and quirky things started happening.
Once, the computer went in to standby and I couldn't get to the login screen - I started pushing all the keys and something worked. That evening I closed the laptop (so it should have gone to suspend) with the MP3 player attached still, and pulled it out, probably as the computer was going through the motions or shortly thereafter. (My player and usb stick suffer no ill consequences if not ejected properly.) Since then I have not been able to boot up. I powered down several times and tried. It seems to start normally with the green screen and little reptile appearing as the monitoring bar grows. Then it goes black, except the cursor's spinning wheel indicating activity. Then comes back to the green screen, with the bar still increasing and nearly making it to completion. Then the black screen and cursor-- forever. Eventually I can hear that the harddrive is no longer spinning.
Also, when the black screen appears, there is an error message that says that the configuration settings for Gnome Power Manager were not installed properly, which I highly doubt since I had no trouble in the installation, but maybe that is pointing the right direction to the problem. Anyway, now I am back to Live DVD, so that I can surf for the answer to this problem. Least that works! Before installing, when I was using SUSE as a live DVD, it sometimes was a little quirky when I inserted the MP3 Player and USB Stick- sometimes wouldn't recognize them, sometimes would, sometimes wouldn't/couldn't unmount. Firefox also would start crashing after alot of use, but I could reboot and things were fine, so I thought this might just be due to the fact that it was Live and not Installed.
I installed it with the default, KDE. I read another post somewhere with a similar problem in which the author says KDE is very bad with inserted media but I wouldn't know if that's true or not. This is the first time I've used linux, apart from a little bit of experience at work. It really has it's ups and downs, when it was working, it was so exciting, when I got hung up so soon, disappointing. The only thing I can think of to do now is reinstall and tip-toe around being extra careful about the quirks when connecting devices. Not very practical though. Thanks for listening to this long story. Will be trying to get it fixed in the evenings after work EST.
PS IF you can bear to read another line. The live DVD I bought was rather badly scratched and scuffed in my opinion. Although there were no installation errors that I could see, would this have had an unknown immeasurable effect that could account for weird behavior?
How con i install win32 codecs (free)in 0pen suse 11.... I have got gstreamer codec pack but on compiling it says missing packages like c, gcc, glib...etc...how can i get them from where do i get them....
View 1 Replies View RelatedAll the three files I downloaded can not been played by Banshee. I got the message like below when I use search the code, so I installed all the Gstreamer I can find.
* Windows Media decoder (GStreamer, 32 bit, i586)
* Advanced Streaming Format (ASF) demuxer (GStreamer, 32 bit, i586)
During that I also did some update, but the problem still the same.
i hav a system which is never connected to internet. I had installed opensuse 11.1 from dvd.But the media files r not working. I had installed gstreamer all sets. And tried to install codecs using a .ypm file i downloaded from the opensuse server but not working without internet. I can download any files in other system and copy it to my system.
View 3 Replies View Relatedwhen i inserted my pendrive, i got this message, and the nautilus opened for me 2 windows for my pendrive, simultaneously And, when i go to the /media, i got this.
View 2 Replies View RelatedI've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
I recently put Linux back on my laptop (Vector) and I am trying to get any of the media players on it to recognize and play the music on my desktop, which is running Windows 7 Ultimate with WMP streaming music over my wireless network. I was wondering if this can be done, or if these features have yet, if ever, to be implemented.
View 2 Replies View RelatedUbuntu10.10.i want a media player with all media codecs.it should able to play all formats of videos and audios so please suggest me a media player.(i used km player in windows i want a media player like that)
View 1 Replies View RelatedQuote:
an error occurred while mounting /proc/bus/usb - press s to skip mounting or M for manual recovery
I'm getting this error while booting.
Just the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
I am having permissions errors every time I try to mount a windows host. I have a linux server and all the windows computers can see that computer and its files, but we wanted to start backing up the linux machine to one of our other computers. so I tried to mount one of the computers. here is the sequence of events:
Code:
$mount -t cifs //192.168.1.194/Admin$ /mnt/Anita-comp
password: (I have no password so I left it blank)
Mount error (13): Permission Denied
I tried all sorts of passwords we use around the office and none of them worked.
I then decided to try mounting one of our other computers. this one looked like it worked fine. no error messages at all. (I left password blank) so I look in my filesystem and the mounted drive is not in the /mnt/Anita-comp file. What gives?