I have VNC set up on my server - connecting is fine - however there is no way to log out from the actual session over VNC (can only disconnect the VNC session itself). What I'd like to be able to do is logout and be presented with the login screen - is this possible ?
View 2 RepliesI followed the instructions at [URL] but whenever I boot with the "persistent" option, the Ubuntu splash screen will take forever to boot, and It's not reading the CD! How do I fix this? By the way, I'm booting 10.10.
View 1 Replies View RelatedI am running a live (4gb) USB of Fedora_14 with 768mb persistent storage. I am trying to add firmware for broadcom wireless link, as it is not natively supported. When I download tar, extract and copy missing firmware then reboot... all changes are reverted back. How do I make these changes persistent upon reboot.
View 8 Replies View RelatedI just did a fresh install of Fedora 11 and the only video resolutions available were 640x480 and 800x600.
The native resolution of the monitor is 1280x1024 and that's what I'd like to use.
I was able to get the display to the proper resolution with the following commands:
Code:
However, rebooting sets it back to 800x600. I have seen the edits to xorg.conf but that file wasn't created.
Is there a way to make the 1280x1028 resolution persistent without creating a xorg.conf file?
i has setup a persistent DNS cache to improve my web-browsing. it works wonders and with my ICC built firefox my web-browsing is laser-fast, pretty much like using internet explorer in windows! however, everytime i reboot, my modifications to /etc/resolv.conf have been replaced... 1st. the file must contain:
# Generated by NetworkManager (obviously modified by this)
nameserver 127.0.0.1 <----this is lost on reboot, and is needed to make it all work
nameserver 209.226.175.223
nameserver 198.235.216.134
i have tried to add this to - System/administration/network, but it doesn't seem to fix the problem. 2nd. my next problem is that when fedora 12 starts up,i need it to start "dnsmasq".i have tried to add it as a startup application, but it doesn't start automatically.so i end up having to start it manually everytime:
sudo /etc/init.d/dnsmasq start
it is annoying, but so far i just deal with it, because my browsing is that much faster! i am planning to post a tutorial for those interested in faster web-browsing in linux, but until i can make the changes perminent there isn't much point.
PS: i have tried to write a shell script to do this and every which way i try it fails
I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent.
One told me to add "slitaz home=usb" to the syslinux.cfg file like this:
append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb
but it didn't work for me.
http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically.
custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008)
does anyone know the best way to make the USB automatically persistent?
I've noticed that every time this desktop is turned on the date & time are as they were the last time I used it, and then have to put in the correct date & time again (this is why I chose the word 'persistent' within the tittle). When I try to change those have to write in the password for the date as well as for the time as if 'login-in' once were not enough! What I want to know is how to put in the date & time and receive the correct amounts the next time I turn the unit on again, as it should be? Do I've to open a terminal & do it with administrator's authority/credentials?
View 3 Replies View RelatedCurrently got a 32bit laptop and im running Ubuntu desktop 10.10 with the 32 bit version, If I upgrading my machine would i need to make a new persistent live usb for the 64 bit machine?
View 3 Replies View RelatedI would like to have the below lines loaded at bootup and anytime the network is restarted (if possible).
Code:
I am using SuSE 11.
Just started using the above distro - anyone know how to make persistent saves to a USB device?
View 5 Replies View RelatedI have a crappy cat5 cable that only works at 10BaseT settings on any nic. I have a gigabit nic which I configure using;Quote:ethtool -s eth2 speed 10 autoneg offProblem is that this setting doesn't stick after a reboot. How do I make the change permanent?
View 4 Replies View Relatedubuntu is capping my wireless connection at 1Mbps, so everytime I boot up i have to type this:
"iwconfig wlan0 rts 2347 && sudo iwconfig wlan0 frag 2346 && sudo iwconfig wlan0 rate 9MB"
How can I make these settings persistent?
I have enjoyed setting up a live USB stick to boot Ubuntu from and it works very well but I can't make my settings persistent. The option to do that in Startup Disk Creator is greyed out, the Stored in Reserved Extra Space is just not available.
View 2 Replies View RelatedMy system boots in 1024x768 screen resolution. I'd like to change it to 1280x1024 for all users. I can change the setting to 1280x1024 and it's persistent between sessions, but is reset back to 1024x768 on reboot. In the old days, I used to edit xorg.conf to set the the mode I want, but now there's no xorg.conf. I created one using
xorg -configure
but this created an xorg.conf which has no modeline settings at all. The file just looks like a template. Here's what I got:
Quote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
[Code].....
Everyone who deals with Linux knows that partitions on hard drives are designated as "sdx#", i.e., sda1 sdb2, etc. I know through experimentation that the number portion of the designation is assigned not according to order on the disk, but chronologically in the order they are created.
Further, if you have several partitions on the disk-say, sda1 through sda3-and you delete sda2, the designation of sda1 will remain the same, but sda3 will become the new sda2. The creation of any further partitions on the drive will start with designation sda3 and increment from that point.
At times this creates a conundrum, especially concerning bootable partitions. Some time back I rendered a partition containing OpenSUSE unbootable because of this, even though Ubuntu owned the GRUB bootloader in the MBR. Ubuntu's GRUB could find and point to the partition using the command "sudo update-grub", but when OpenSUSE took over the boot-up process, its GRUB was pointed to the wrong partition and would freeze up.
My question is this:
Under Windows, one is able to make a Drive letter persistent. Windows will keep the drive letter for that partition and assign around it. Is there a way to change a drive designation number, or at least make it persistent, under Linux? It would be a handy method to forestall these types of booting problems, among other things.
Presently, when a person has installed Linux side-by-side with Windows and want to delete the Windows partition and expand the Linux partition into the free space, I will tell them to format the partition, then shrink it to next to nothing instead of deleting it. This preserves the partition ID scheme while giving them the space to expand their Linux partition into...especially helpful with a seasoned Linux installation that would be a PITA to reinstall and set back up.
Oh, and I already know about UUID. This article explains it, but if you look down through the comments, you will see reasons that it is problematic for desktop application and usage. I want to make it as simple as possible for new Linux users (and myself! ).
I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies View RelatedI am a linux newbie and want to try to run Fedora 13 from a 4Gb USB flash drive for a while until I decide to do a permanent install.My problem is that although I selected to create persistent storage using the liveusb creator, nothing is being saved after rebooting.For reference, I downloaded the 64bit version using bittorrent, and I created the live usb on windows 7.Is there some setting I must set to enable persistent storage?
View 2 Replies View RelatedI am currently running Windows 7 and would like to "play around" with Linux and learn how to use it, but am not willing to entirely "jump ship: as of yet. Thus, I would like to be able to use my USB key (32 gig) that is persistent. I have had no success in being able to get this to work; I went to http://www.pendrivelinux.com/ and attempted several different times and the only one I could get to work was not persistent.
View 9 Replies View RelatedI have a ubuntu 10.04.1 install with openvpn, so I have some routes in my /etc/networking/interface file. But for what ever reason when it boots the routes don't come up and I have to restart the networking before they come up. Once I do that all is well.
View 4 Replies View RelatedI would like to make all directories except /home non persisent this way any changes are undone by a reboot. (this will be used by kids)Where do I start?I've worked with Linux for years, but never tried this.
View 4 Replies View RelatedI would like to know if I can update a live USB version of 10.04I am, unofficially, running ubuntu 10.04 live USB version from a partition on my 250GB USB HDD at work.All the apps I use are web bassed except for zeacom and groupwise which I run from a virtual machine I created using virtualbox ose, this machine is one the network running AD and novel and also MS office and uniflow printing
Everything at the moment is running quite well: I tried this a while ago (9.04 or earlier) but I tried enabling update manager and this killed the boot for my live USB and I don't what to risk toying with a system that is running well but I also want to be up to date.
I was able to check a box that would keep me logged in to an irc chatroom, even when the dialogue was closed. With lucid, I'm trying to find a similar setting for Empathy.Right now, whenever I close the window, it appears I quit that chatroom.
View 4 Replies View RelatedI'm trying to figure out how to make persistent changes to the Gnome menu. I know I can make user-specific changes, as defined by Alacarte, but that's not what I need for this machine. I'm running Ubuntu 10.04 with Gnome 2.30.2.
Per freedesktop.org specs I created an entry for a new sub-menu under Applications called Social Networking. I simply copied an existing menu entry and made the appropriate changes.
For example:
<!-- Social Networking -->
<Menu>
<Name>Social</Name>
<Directory>Social-Networking.directory</Directory>
<Include>
<And>
<Category>Social</Category>
</And>
</Include>
</Menu>
Next I created a .desktop file in /usr/share/desktop-directories/ called Social-Networking directory.
[Desktop Entry]
Name=Social
Comment=Social Networking Applications and Utilities
Icon=preferences-system-network
Type=Directory
X-Ubuntu-Gettext-Domain=gnome-menus
Now, I'm stuck. I can't seem to figure out how to make an application's menu appear in the Social Networking sub-menu. For that matter, I can't even get the Social Networking sub-menu to appear under Applications. I assuming it will appear once I "associate" an applications's menu to the sub-menu, but I'm only guessing right now. I've logged out and back in; I even restarted my machine. Though I am not new to Linux, I am new to Ubuntu and Gnome.
I have a ubuntu 10.04.1 install with openvpn, so I have some routes in my /etc/networking/interface file. But for what ever reason when it boots the routes don't come up and I have to restart the networking before they come up. Once I do that all is well. Any idea's why it's doing that?
View 1 Replies View RelatedI am having persistent crashes on my Ubuntu system... Running Lucid and having sound issues and random crashes when playing SC2...
Eventually had an initramfs error... which magically cured itself on a reboot... eveything seemed fine for an hour then another crash...
I have attached a photo of the screen that is on at the moment. I keeps trying to do the last command and refreshes every minute...
I'm attempting to create a persistent live USB. My flash drive is 32 GB, so I plan on creating a 8 or 16 GB ext casper-rw partition for my persistence (as described here.) I would like to have the remainder of the space available as an NTFS partition. However, most of what I'm reading indicates that only FAT32 is possible for a bootable Ubuntu USB.
I've been told that if I simply installed to USB drive as if it were a regular old HDD, it would be bootable and I could simply format the rest as NTFS. I'm wondering if this is true and why all these utilities I've found (Linux Live USB Creator, Universal USB Installer, etc...) insist on FAT32. Persistent (>4GB) bootable usb, with the rest of it a windows-recognizable NTFS partition?
I am having persistent crashes on my Ubuntu system... Running Lucid and having sound issues and random crashes when playing SC2..Eventually had an initramfs error... which magically cured itself on a reboot... eveything seemed fine for an hour then another crash.I have attached a photo of the screen that is on at the moment. I keeps trying to do the last command and refreshes every minute.
View 4 Replies View Relatedtoday I setup a USB drive to use Qemu to boot Backtrack. It was so easy my grandma could do this! My thanks goes out to anyone who worked on the Qemu project!Now, I am wondering, how hard it is to get a distro to run persistently, using Qemu. I would like to have my .bashrc, apps I install, small scripts I write, etc. saved instead of the default bootup each time.
It doesn't matter which distro it is as long as it is Debian based. I did find this thread which I will try later but it sounds almost like I need to boot from USB first... not quite sure. I was hoping I could get further insight from someone before I waist too much time working toward something that will not happen.
I'd like to make a "live" USB, probably Ubuntu or a derivative such as Mint. How do I make it persistent? FWIW, this particular project will be primarily used for Ubuntu Studio. My hardware works fine with all versions of Ubu and Deb so there are no driver issues, simply the question of adding persistence to the stick
View 2 Replies View RelatedI implemented a SSL client using openssl on Linux and it's working fine i am getting response from server...
But my problem is I have a separate thread for each request comes form front end and i have to do SSL communication in each thread, for this i have to create a separate SSL Context for each thread and this is taking too much time hence my transaction is getting delayed
My question is can we implement Persistent SSL connection where i will do SSL Handshake only at the time of application startup and use that connection in all the threads....