Somehow my file encryption password changed so when I went to re-install Fedora it said SDA-2 will not be available during installation.Is there a way to erase the whole disk including the ecrypted portion?
View 2 Replies
Well i have Debian on, and have been using Wine to use some windows applications, unfortunately the 2 main games i wanted to use don't work on it, and a variety of other applications don't work either. XP is a bit intensive for my laptop, so even though i own it, i can't install it. I wanted to install Windows 98 to my laptop, but there are some issues, and i have no idea how to get around them.
1. My laptop has no CD/DVD drive (has one but doesn't seem to read any disk), it has no floppy drives, and the BIOS does not support booting from USB.
2. When trying to create a seperate partition on my HDD with linux on to try and make room for Windows, it stops me saying the drive is busy.
Specs:
2.8GHZ Pentium 4
ATI Radeon Mobility 7000 IGP 32MB Shared memory
256MB of RAM (217MB due to shared memory)
40GB HDD
2GB USB Storage Device which currently has Windows 98 SE setup files on it.
Has an internet connection via ethernet cable to my brothers laptop. Also have GRUB installed, asks me which OS to boot. Debian Squeeze.
Ideally i wanted to wipe debian off, as its putting my laptop under a bit of strain and can't run what i want it too, or if thats not possible, just split the HDD in 2 and have Windows 98 as my main OS.
Is it possible to install ubuntu 10.04 on a second partition without overwriting the windows7 bootloader and boot it using grub on a usb stick?
I would be happy with just the second option as I could fix mbr if I have to, I just don't want it to easily visible that linux is installed as well as windows.
I have been using fedora 12 for last 6 months, recently I bought an external USB hard drive of 320 GB capacity. I made 2 partitions using the Disk Utility in Fedora. I encrypted the first partition as it was supposed to hold a lot of sensitive data, and yes it did have. Now I had to change my OS to AV linux for some audio-video editing work which wasnt being done properly on fedora due to some issue beyond my knowledge. now the problem is my encrypted partition is not accessible in my new installation. I see an empty space on my /dev/sda1. although no change to partition data has been done and the data on the second partition /dev/sda2 is easily accessible. when putting the drive on automount, is does not ask me for the password and neither does it show me the data. I have tried fdisk and sme other utilities but have failed to get my drive unencrypted.
View 7 Replies View RelatedI used Ubuntu for years now, but since the latest decisions got public I deceided to try something new: Fedora. I installed the system as a dualboot,Ubuntu and my old data. Because Fedora got installed inbetween of two partitions,ad to do the partitioning manually. I just made one partition /dev/sda4. During the installation process I got asked about the password for my /dev/sda1 partition. Of course, I entered it. So far so good.Now, everytime when I boot, the boot process stops and asks me for the password of the /dev/sda1 partition. However, the boot process does not go on, unless i press STRG+C.After the log in, I can also not access my data, by entering the password (GUI).The only way I can acces the data on that partition is:
Code:
su -
cryptsetup luksOpen /dev/DEVICENAME luks-fedora
[code]...
Can I resize an encrypted partition with gparted?
View 2 Replies View RelatedI keep my /boot partition on a usb stick, where i keep the keyfile as well. I already generated the keyfile and added it to the LUKS LVM partition.Right now, on bootup I get a nice GUI to enter my 40 character password which is nice but a little tedious What do i need to modify for the system to automatically unlock the partition with the keyfile that is stored on the /boot partition
View 4 Replies View RelatedI encrypted my /home partition in my last installation F13. For some reason, I have to reinstall F13. After I login, I can not access /home. I followed some instructions like
modprobe dm-crypt
modprobe dm-mod
cryptsetup luksOpen /dev/vg_vit/lv_home vg_vit-lv_home
[code]...
I need to access /etc/modprobe.d on an encrypted LVM LUKS partition. I m not sure how to go about it though. Mount usually handles my mounting needs, do I need to decrypt the physical volume first? LIst of commands need would make my day.
View 1 Replies View RelatedI have encrypted a partition while installing Fedora 13, and I need to disable its automount - I will mount those manually.
But even though I commented out the corresponding line in /etc/fstab, I am still asked for the passphrase for the partition at startup.
How to completely disable this behaviour - and how to mount the partition manually afterwards?
I just picked up a 1.5TB external drive. I want to wipe the NTFS partition (I assume that's what it is) that is there and replace it with an encrypted ext4 partition.
Is there a HOW-TO somewhere for this?
couldn't find anything similar on the forum.I am writing a kickstart for fedora 14 with a partition table similar to:
part / --asprimary --fstype="ext4" --size=10000 --encrypted --passphrase=pass1
part /boot --asprimary --fstype="ext4" --size=130
part /var --fstype="ext4" --size=5000 --encrypted --passphrase=pass1
[code]...
Anyone had any experience with unlocking a LUKS encrypted root partition via ssh? It is ok to leave /boot unencrypted.
There are a few pages from google with the debians variants, archived by putting dropbear into initrd.
I like to do that with my fedora/centos remote servers, but struggle to find any resources specific to it. Anyone has any suggestions and thoughts as to what might be a suitable way forward?
I need a FREE solution that can image an entire Luks system encrypted volume and the rest of the used HDD, the MBR and /boot partition. Note: MBR and /boot are not encrypted. Note 2: I want to be able to restore entire drive from image with only a couple of steps. Note 3: Destination HDD space is a factor. Image file must be compressed and the image file must be around 40 to 50 GB or less. The smaller the image the better.
I have used clonezilla live cd before but not for encrypted volumes. I know you can install it in Linux. But, I don't know how to configure it after installation. I would be very happy if someone could tell me how to configure clonezilla in Fedora. How to guides are also welcome. I have one more question. If I image the encrypted volumes and all the stuff I mentioned above while logged in to Fedora, and I restore the drive from the image, will the recovered drive still be encrypted?
Is there a method to prevent the grub installer from overwriting the MBR pointer when grub or the kernel is updated? I'm running a multiboot system and when Fedora's grub installs, then OpenSolaris' partition isn't included in the bootlist and Ubuntu's menu line has a chainloader line that doesn't resolve correctly, requiring a hand edit.I may try to do a chmod 444 grub-install , but I'm not so sure what the reprocussions may be.
View 9 Replies View RelatedI actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
I read an article earlier that suggested the swap partition is encrypted by default if you select an encrypted /home folder during installation, is that true (for Lucid)? I am suspecting it isn't because my hibernation works, which I believe shouldn't be the case?
View 3 Replies View Relatedhad a lvm (non luks i suspect) home partition on my 11.04 install. I've since install opensue on the same laptop hoping that if i don't leave that partition alone during opensuse installation i would be able to mount and enter my key to access the data within...stupid me.... i formated my /boot and / partition, not my /home partition of 450gb. I'm now back on ubuntu 11.04 trying to get access to my data. i'v found the command "encryptfs-recover-private" but i only works on mounted partitons, i can't mount my encrypted partition because the system does not recongnize it. I've have to format it to mount it.
fdisk
(bold is my encrypted partition)
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 96256 83 Linux
Partition 1 does not end on cylinder boundary.
[Code].....
I installed an old version on accident, I used an encrypted LVM. When I removed the old debian and started the installation of the new version, the encrypted partition could not be used to install, and the drive itself was creating an error message when I tried to mount the installation there. This is probably a vague explanation of what is happening, but does anyone know how to remove these encrypted LVM partitions?
View 2 Replies View RelatedI'm trying to install Debian on a USB to create an encrypted partition, I get an error message saying I need to install missing firmware rtl_nic rtl8168d-2.fw.So I download that file and try again this time I get an error " There was a problem reading data from CD Rom" .I not using a CD Rom I put debian on the USB as an ISO file first using Unebutin then tried Rufus.
View 12 Replies View RelatedI have Debian and Virtual Box with another Debian. I have resized max size of vdi file with VBoxManage modifyhd but now I need to resize partition on virtual machine's system. I've downloaded GParted and I can run machine from this ISO as CD. Partition is encrypted on machine.Unfortunately GParted doesn't start with X so I have to use it in terminal. I can see partitions:
Code: Select allroot@debian:/# fdisk -l
Disk /dev/sda: 80 GiB, 85899345920 bytes, 167772610 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3914....
[code]....
So I though maybe I need to use this (URL...). I couldn't find similar tutorial about Debian or GParted but OK, it's just executing these commands, not modifying its source.list.But I cannot even do the update:
Code: Select allroot@debian:/# sudo apt-get update
Err: http://free.nchc.org.tw/debian sid InRelease
Temporary failure resolving 'free.nchc.org.tw'
Err2: http://free.nchc.org.tw/drbl-core drbl InRelease
Temporary failure resolving 'free.nchc.org.tw'
Reading package lists... Done
W: Failed to fetch http://free.nchc.org.tw/debian/dists/sid/InRelease Teporary failure resolving 'free.nchc.org.tw'
W: Failed to fetch http://free.nchc.org.tw/drbl-core/dists/drbl/InRelease Temporary failure resolving 'free.nchc.org.tw'
W: Some index files failed to download. They have been ignored, or old ones used instead.
So I check my internet connection. VirtualBox has 'attached to NAT' and before I run out of space on virtual machine, Debian could access internet. So it's only something about this GParted. I have modified /etc/resolv.conf with vi (even vim is not available). And it has two valid nameservers. I haven't restarted anything, as I'm not sure if I need to, after modifying resolv.conf file.But even in that case I cannot ping anything from GParted:
Code: Select allroot@debian:/# ping www.google.com
ping: unknown host www.google.com
How can I access internet from GParted and resize encrypted partition?
Times like this Ubuntu makes me want to pull my hair out. When I enter my pass on the login screen, it brings up a "Could not update ICEauthority file" error and then goes to a black screen. I've tried to fix this problem for the past 2-3 hours (searching google, these forums, etc) and at this point, I just want the data off my drive so I can restart with a fresh install of Ubuntu. I used the "gsku nautilus" command to mount the disk from a Ubuntu Drive boot, but it's not letting me have access to the encrypted drive. Does anyone know of a work around for this?
View 1 Replies View RelatedI have a dual boot WinXP / Kubuntu system. Recently, I tried to upgrade from 9.10 to 10.04. I have my Kubuntu partition set up with separate partitions for / , /home , and swap. Naturally, I wanted to wipe the slate clean, so I formatted / and left /home alone before doing the install. However, my /home partition was encrypted with the standard crypto that you get when you install. I just deleted the way in by wiping my / partition. Now all of my files are on my drive but encrypted. I do have the unencrypted passphrase given to me when the hard drive was first encrypted, so I am sure there is some way to get my files, but I am unsure how to apply it.
View 9 Replies View RelatedI found this website [URL].., and am able to go all the way up to "ecryptfs-mount-private" command, but the response I get after entering my login passphrase is "mount: Operation not permitted". I am not sure why though I am guessing I have a permission issue.
View 1 Replies View RelatedI had to reinstall Windows, which has obviously overwritten my lovely Ubuntu Natty
I would like restore grub2, however failling to do so
I'm running:
Code:
sudo mount /dev/sda1 /mnt/boot
sudo cryptsetup luksOpen /dev/sda5 crypt1
Enter LUKS passphrase:
key slot 0 unlocked.
[Code]....
I backed up all of my files last night via SFTP before I reinstalled Ubuntu *Since nobody answered my question* and I went ahead and encrypted my home folder. How do I open port 22 like Ubuntu normally has it? I've tried this guideBut it didn't work, how do I set up SSH? I really need those files.---------- Post added 07-05-11 at 10:17 AM ----------Also, my Desktop is encrypted, but I forget, but I may have encrypted my laptop since the port is also closed on that as well.
View 3 Replies View RelatedI boot the crux 2.7 install mediaI try to use cryptsetup, but it says command not found.I load the dm-crypt module (modprobe dm-crypt)Ismod to verify that the module is there...bash still says it cant' find cryptsetup.
View 1 Replies View RelatedI have a really tricky and may be intresting problem with a encrypted disk partition (cryptsetup luks...) which was fine until it accidentally got re-formatted by an instance of Windows 7. Most of the data on that 1TB-disk will probably still exist, only the LUKS header at the very beginning of the partition is - of course - gone.
So when I try to open the container, it gives no verbose, just the return value 234.
I scanned the whole partition for other LUKS headers with hexedit, none there. But, luckyly I have another partition which is encrypted in the exact same way with the exact same passphrase (which I remember very well!), so I had an idea: I copied the LUKS header (592 bytes) from the other LUKS encrypted partition over to the damaged partition.
When I now issue
Code:
Code:
No key available with this passphrase
Here is the command how I created the container:
Code:
How do I get the existing passphrase accepted by LUKS?
I have two basically identical harddrives that are encrypted with LUKS containing a complete debian installation:
Code: Select allroot@x200s:/home/b# lsblk --fs
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ext2 0b851969-281e-4db2-8a5b-3798e801711b /boot
├─sda2
└─sda5 crypto_LUKS cfcf63ef-448a-4f72-9f58-8f7731cf3dfc
└─sda5_crypt LVM2_member 21CS3f-SQeQ-XcMr-kyDs-OPtR-egmT-HkvJAu
[Code] ....
sda is what I currently run to write this text, sdb is my former harddrive, connected via USB.
I want to access the root partition on sdb.
The problem is:
Code: Select allcryptsetup luksOpen /dev/sdb5 oldhd
Enter passphrase for /dev/sdb5:
root@x200s:/home/b# ls /dev/mapper/
control oldhd sda5_crypt x200s--vg-root x200s--vg-swap_1
root@x200s:/home/b# mount /dev/mapper/oldhd /mnt/
[b]mount: unknown filesystem type 'LVM2_member'[/b]
[Code] ..
Before all this, both sda and sdb where in the same volume group. I renamed the volume group of sdb to "oldDisk"
using
Code: Select allvgrename <UUID> oldDisk
How I can access the data on the root filesystem of my sdb..
I currently have a simple bash script set up via cron to backup my data (rsync) to an internal hard drive at regular intervals. I leave this "backup" hard drive unmounted, and it is mounted and unmounted as needed with the bash script. If I were to encrypt this "backup" drive (via Luks, or some other means), is there a way to get my backup script to work without me having to be there to enter a password?
View 4 Replies View Related
