Fedora Networking :: Network Manager Setting Invalid Error
Jun 23, 2010I am using fedora 13. when i restart network service then following error.
View 3 RepliesI am using fedora 13. when i restart network service then following error.
View 3 RepliesI have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).
Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...
I am trying to set a fix ip address with network manager since my router is not able to set it in order to make port forwarding for aMule.I managed to set the IP address and also de primary/secondary DNS on network manager.My question is: should I set the same DNS on bot the router and network manager?More detail: my router has its own DNS's other than those of OpenDNS. At the moment, I left those DNS's on the router and set up the OpenDNS ones on network manager.Is it correct or should I set the same DNS's on both the router and network manager? In this case, would it be a waste of time since there will be a sort of "double requesting" to the same DNS? Or one of the 2 DNS settings overrides the other one (for example, just the network manager DNS's are considered)?buntu NattyKernel 2.6.38-10-generic #46-Ubuntu SMPNetwork Manager version 0.8.4~git.20110318t152954.9c4c9a0-0ubuntu1
View 1 Replies View RelatedI have just intsalled Gnome3 and GS with the Ricotz ppa. My network manager is showing as invalid, I am still connected to the net but I cant do anything with my network settings.
View 1 Replies View RelatedI successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
[Code]...
When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies View RelatedI updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
View 2 Replies View RelatedI have just installed openldap on my Red Hat server and it is running:
[code]...
However when I try to add my first ldif file base.ldif, no matter how many time I enter in the correct password I get invalid credentials [root@server init.d]# ldapadd -D "cn=Manager,dc=mathcs.duq,dc=edu" -W -f /home/oberlanderm/base.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) I have to be forgetting someting simple,
[code]....
I'm running Slackware 13.1 with fluxbox as my wm. I want to set up network-manager along with the pptp plugin. So far I've installed the NetworkManager and the network-manager-pptp plugin along with all the dependencies specified in the slackbuild packages which I downloaded from [URL]. I could use some help configuring the network-manager so that I can launch it as a regular user rather than as root and I want it to come up in the fluxbox toolbar if possible.
View 10 Replies View RelatedWhen I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI'm currently setting up a vlan network and after reading several man pages I still have 2 questions / problems:
1. I would want to put several subnets into one vlan.Meaning for example, I want to have the following Vlans with subnets:
vlan1 10.1.1.0/24
vlan2 10.1.2.0/24
vlan3 10.1.3.0/24
vlan3 10.1.4.0/24
vlan3 10.1.5.0/24
Is that possible?
EDIT: I found a sample configuration, sadly without any comments, where there are defined some interfaces named vlan1:0 trough vlan1:3. Could that be the option I've been looking for.However in the definition of the vlan1 device it is configured with the subnetmask 255.0.0.0 . I would like to know the mechanics of that option, too.
2. In the wlan part of the network I want to have a dhcp server distributing ip addresses. However I want hosts the server 'knows' (by mac address) to be in a different vlan than those unknown. Is there any way to achieve that? If yes, do I need special wlan access points or can I do it by my configurable switch or by the server?
I updated my FC10 just a day back. The problem is that Netwrok Manager has disappeared. And in spite of re-installing it, it doesn't appear on the panel when i enter 'NetworkManager' as root in the terminal.I have a USB modem right now. Update was made through a broadband connection. Ethernet works perfectly well but this USB modem of mine doesn't work at all. And I have to use USB not Ethernet.
View 9 Replies View RelatedI have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.
View 4 Replies View RelatedI have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.
I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.
I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.
I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.
Is there a way to enable these, so that they can be edited?
Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections
The Network Manager window appears correctly.
I see all automatically generated settings that were created for my various devices:
In particular, I want to be able to edit "Auto vmnet8", for VMware usage.
I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.
However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).
I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.
Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.
I got a little problem with network manager. I got two connections in it, with two different DNS-Servers, because the one of my provider is very slow I surf with opendns, but sometimes that slows down too, so I want to change if necessary. Both connections got the same fixed IP.That worked all fine, until I got my new router (it's a Netgear WGU 624). It's connected by cable and I configured it like the old one. But for some reason instead of connecting to the manually configured connections, my fedora 10 creates a new one "auto eth 0" with a dynamic IP. So every time I boot or switch on from standby my PC connects with this one and I have to manually set it to the right connection. There's no chance to edit or delete it cause those two buttons are grey and won't work. I also tried restarting network manager manually and I also tried starting it with su as root.
View 14 Replies View RelatedI lost my network manager applet after removing kde-desktop. restore it, as I dont find it in add to panel applications I dont have any clue, also how could I add bluetooth applet in notification area.
View 5 Replies View RelatedI currently managed it to get a pptp-connect to my home network. now I have another little problem. NetworkManager always routes the whole network traffic over my home network if i am connected to the home network.If i set the "Use this connection only for resources on its network" I have do manually say:
Code:
route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0
After that only the correct traffic runs over the vpn. Now my question is it possible to setup the route via the networkmanager gui?
After an update in mid-February I can no longer get Network Managero run anyinterface. I tried downgrading ppp, but that did not help. I have tried to delete all devices, but there is no user interface from which I can do that. Network Manager does not appear in any system tray. I even did a complete remove and reinstall, to no avail.This is true on both 32 and 64 bit Fedora 12, and on laptops, desktops and VBox VMs.Here is what I see in messages.log:
Code:
Mar 27 12:09:46 vmf11x64 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
[code]...
I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?
View 6 Replies View RelatedI just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.
PHP Code:
Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.
What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.
I have a laptop with ipw3945 on. I don't want to use Network Manager. this is my wpa_supplicant.conf
PHP Code:
[code]....
I do as root:
PHP Code:
[code]....
In another terminal as root I do:
PHP Code:
[code]...
but no IP address got.
does Network Manager in Fedora 15 support bridging and if so, can you configure the bridge using your wireless interface? All of the information I've come across so far said that you can NOT create a bridge using a wireless interface, and that Network Manager doesn't support bridging, but this info was also from Fedora 12 and below, so I don't know if it's still relevant for Fedora 15. I would certainly hope that by now you can make a bridge from a wireless interface. Even the lowly VMware Player offers this option.
View 2 Replies View RelatedI am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail
View 6 Replies View RelatedI'm a new fedora-user and are having some problems setting ut everything as i want:
The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE
The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.
I'm currently on F11, and experienced problems with Network Manager. Whenever I to connect to a network, wired or wireless, it just seems to try to connect, and then after 2-3 seconds, it just reports "Disconnected"..
Then I switched to network, and both wired and wireless works. so I don't think there is any driver or hardware issue...
Does anyone have any idea of this problem? The network manager have worked on the live CD version ( before installed to HD).
I've set up a caching nameserver on my laptop running Fedora 11. The problem with this is that NetworkManager always overwrites the entry that points to the local nameserver. NetworkManager no longer respects /etc/dhclient.conf or at least its scripts run after dhclient.conf. Also it doesn't respect /etc/sysconfig/ network-scripts/ifcfg-* setting of DNS{1.2}.The man page of NetworkManager describes scripts that run in /etc/NetworkManager/dispatcher.d which can be run when interfaces are brought up and down. I've written a script that will put the entry needed for the local nameserver.
View 1 Replies View RelatedI have installed recently the Fedora 8 in a computer and during installation it was set a static IP with the netmask and gateway. At first it worked well, but after some boots the connection begins to fail. It seems that the network-manager withdraws the static IP and tries
to get connection via DHCP. Below is the /var/log/messages file during the failed connection:
Code:
Sep 19 10:36:53 canario avahi-daemon[1695]: Interface eth0.IPv4 no longer relevant for mDNS.
Sep 19 10:36:53 canario avahi-daemon[1695]: Withdrawing address record for fe80::20d:87ff:fe0c:355f on eth0.
Sep 19 10:36:53 canario NetworkManager: <info> SWITCH: terminating current connection 'Auto Ethernet (eth0)' because it's no longer valid.
Sep 19 10:36:53 canario NetworkManager: <info> Deactivating device eth0.
Sep 19 10:37:07 canario system-config-network[2195]: -+ //etc/modprobe.conf #011eth0 alias sis900 .....