My machine is running with RHEL 3 and the kernel version that I am using is 2.4.21-37.EL. I would like to upgrade present gcc 3.2.59 to gcc-3.4.6-8. I tried but encountered with errors like dependencies and many more. how to upgrade gcc.
View 5 RepliesI just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:
Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.
Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.
In KDE I have no System Notifications, Kaffiene, Amarok2, Amarok and Xine immediately exit when opened without an error. If I try to open the System Settings/Multimedia or System Settings/Notifications control panels they also exit without an error. I have audio in other applications, MPlayer, Skype, VLC, Songbird, etc., as well as from the Konsole. I've tested Konsole audio using the published guidelines in the Audio HowTo, 'speaker-test' works fine for all users. In Yast2 I can configure and test the audio card without errors, but I am not able to get USB headphones working. I have been through the 'Check your multimedia problem in ten steps'. There are no errors or missing dependencies showing up. I've booted from the 11.2 Live CD and everything worked fine including KDE Notifications and application audio. I've tried deleting my .kde4 profile, this didn't fix the problem, and application and control panel behaviour remained the same with a clean profile.
View 1 Replies View RelatedI have a computer with 128 ko of RAM (a very old one). I installed yesterday ubuntu 8 because ubuntu 9 requires 512 ko of RAM and was very slow. Now, I have problems to update packages and to install every thing. I changed the sources.list because it seems that links are no more available according to the error messages. (I have put many adresses for ubuntu 9 because I think the kernel is the same not as the kernel for ubuntu 10). But new problems have occurred like "broken dependencies". Now I want to correct, and I don't know how? I'm still a beginner with this OS.
View 2 Replies View RelatedI have a very unusual [and most likely unsupported] upgrade path I need to take.
I have two servers, both Dell PE1800's that I need to upgrade.
One of them is a Fedora Core 4 (x86) box and the second is RHEL5 x86_64.
I need to do an in-place upgrade to CentOS 5.3 without having to reinstall from scratch and keeping my downtime to an absolute minimum. Each of these servers has about 10TB of data stored and I really don't want to have to reformat and restore from backps.
How can I do this?
My RHEL 6 computer at work cannot have access to the internet. Is there any way I can upgrade my kernel without internet access? I do ofcourse of another PC with internet access and a USB flash drive.
View 2 Replies View RelatedI am getting errors when I try to install any package on my RHEL 5.3 linux box. I've previously installed mc(midnight commander) using yum but recently it started failing.
I've inserted a log of a session below.
[root@anjanb ~]# yum install multitail
Repository engineering-update is listed more than once in the configuration
Repository engineering-install is listed more than once in the configuration
Repository emergency-update is listed more than once in the configuration
Repository emergency-install is listed more than once in the configuration .....
Trying other mirror.
Error: failure: repodata/primary.xml.gz from adobe-linux-i386:
[Errno 256] No more mirrors to try.
I have an Intel Core2 Duo system that I upgraded from Fedora 12 to Fedora 14 (32-bit). When I try to install updates from YUM I get the following error output:
Dependency Resolution Errors:
Package: netbeans-apisupport1-6.7.1-1.fc12.noarch (@fedora/12)
Requires: netbeans-platform = 6.7.1
Removing: netbeans-platform-6.7.1-2.fc12.noarch (@fedora/12)
netbeans-platform = 6.7.1-2.fc12
Updated By: netbeans-platform-6.9-4.fc14.noarch (fedora)
netbeans-platform = 6.9-4.fc14Package: netbeans-apisupport1-6.7.1-1.fc12.noarch (@fedora/12)
Requires: netbeans-platform-harness = 6.7.1
Removing: netbeans-platform-harness-6.7.1-2.fc12.noarch (@fedora/12)
netbeans-platform-harness = 6.7.1-2.fc12
Updated By: netbeans-platform-harness-6.9-4.fc14.noarch (fedora)
netbeans-platform-harness = 6.9-4.fc14.
How can I resolve these errors so the system can update properly?
i have old RHEL 3 system which has kernel 2.4 installed into it. I wasnt to upgrade it to RHEL 5.x so i downloaded a kernel 2.6 package but was not able to compile it.
View 1 Replies View RelatedJust upgraded from FC14 to FC15 but YUM is bust, I get the errors of: Could not retrieve mirrorlist... Tried checking the my fedora.repo and fedora-updates.repo and they are all fine and even added in entries into my host file but I still getting the error, am I missing something simple?
View 10 Replies View RelatedI'm a network services rookie and I am seeing this error, but it doesn't seem to be effecting functionality. Nov 22 12:12:16 r01 nscd: nss_ldap: reconnected to LDAP server ldap://10.5.1.4 after 1 attempt This error is scattered through out my logs. We are authenticating this Red Hat server to another OpenLdap server. Everything seems to work just fine and we are not even using Kerberos as this is a render server. We set-up ldap right in the GUI, nothing fancy.
RHEL 5.4, Basic install, again, nothing fancy. LDAP does seem to be working fine and allows the right people to login to the machine. We have two of these machines running and both are configured exactly the same and getting the same errors.
I'm running debian testing on my laptop. This morning when I ran apt-get update && apt-get dist-upgrade, I was greeted by the following errors:
Code: Select all
Calculating upgrade... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information to resolve the situation:
The following packages have unmet dependencies:
libcurl3-gnutls : Depends: librtmp1 (>= 2.4+20131018.git79459a2-3~) but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
A quick search found out that package librtmp1(2:2.4~20150315.gita107cef9b-dmo1) is already installed.
I do have some packages set on hold, however I don't think that's the problem:
Code: Select all$ dpkg --get-selections | grep hold
hostapd hold
libgcrypt11:amd64 hold
linux-image-amd64 hold
My sources.list on which I haven't touched for a very long time:
Code: Select alldeb http://mirrors.163.com/debian/ testing main non-free contrib
deb-src http://mirrors.163.com/debian/ testing main non-free contrib
deb http://mirrors.163.com/debian-security/ testing/updates main contrib non-free
deb-src http://mirrors.163.com/debian-security/ testing/updates main contrib non-free
deb http://mirrors.163.com/debian/ testing-updates main contrib non-free
deb-src http://mirrors.163.com/debian/ testing-updates main contrib non-free
I've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
I am trying to upgrade to ubuntu 11.04 from my current 10.10 system. If I try to upgrade with Upgrade Manager it stops at calculating upgrade step and I can see red circle at top left corner, hovering over this gives message -
An unresolvable problem occurred while calculating the upgrade.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.'
If I run
sudo apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Failed
The following packages have unmet dependencies:
libappindicator1 : Depends: libdbusmenu-gtk3 but it is not going to be installed
Recommends: indicator-application (>= 0.2.93) but it is not going to be installed
overlay-scrollbar : Depends: liboverlay-scrollbar-0.1-0 but it is not going to be installed
python-aptdaemon-gtk : Depends: python-aptdaemon.gtk3widgets (= 0.41+bzr646-0ubuntu2) but it is not going to be installed
python-couchdb : Breaks: desktopcouch (< 1.0) but 0.6.9b-0ubuntu1 is to be installed
python-desktopcouch-records : Conflicts: desktopcouch (< 1.0.7-0ubuntu2) but 0.6.9b-0ubuntu1 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
A couple of days ago, I upgraded my Kubuntu to Lucid. In this phase, the system reported that it was impossible to upgrade samba-common, and the installation aborted on 90%. Nevertheless everything is working but KPakageKit, which reports:
"There are broken dependecies on your system. Please use an advanced package manage e.g. Synaptic or aptitude to resolve this situation."
Neither "sudo aptitude safe-upgrade" nor "sudo apt-get -f install" solved the problem:
omen@darkstar:~$ sudo aptitude safe-upgrade
[..]:
samba-common
kubuntu-desktop .....
So the problem is really samba-common.
i would like to upgrade my redhat without connecting internet. just offline mode. is there any one can guide article documentation step by step. the current os is cat /proc/version Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005 and planning to upgrade Linux version 2.6.18-128.el5 [URL] (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Dec 17 11:41:38 EST 2008 as i have not done this task before.
View 3 Replies View RelatedMy current Linux Version:
#more /etc/redhat-release
Red Hat Enterprise Linux Server release 5.2 (Tikanga)
OS Bit is :
#uname -a
Linux <hostname> 2.6.18-128.1.16.el5 #1 SMP Tue Jun 30 06:45:51 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Now i want to upgrade to RHEL 5.3 (ie)Red Hat Enterprise Linux Server release 5.3 (Tikanga).
Can we upgrade RHEL 4.8 to RHEL 5.5?
View 3 Replies View RelatedDuring my upgrade I had errors. 3 times the same list of errors.
Once they followed:
Once they followed:
Once they followed:
The errors are:
Should I try to do something about it? My computer seems to be functioning normally.
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
I just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
I am trying to get Ubuntu 8.10 upgraded to Ubuntu 10.10, I'm having all sorts of errors:
Code:
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.
Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'hardy' to 'lucid' entries. If you select 'No' the upgrade will cancel.
Continue [yN] After pressing yes
Code:
I receive the following errors every time the upgrade option appears and cannot get past it.
W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/...ty/Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname)
, W:Failed to fetch http://security.ubuntu.com/ubuntu/di...ty/Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname)
[code]....
I have Ubuntu Server 9.04 running, and have been attempting to install updates/upgrades using apt-get install and keep getting error messages stating could not resolve 'us.archive.ubuntu.com. What exactly does this mean?and is there a workaround. I would like to upgrade to another version if possible.
View 1 Replies View RelatedI was using RHAT 6.0 Open Client for a couple months and didn't have any issues. Recently my company released version 6.1 of Open Client and recommended to upgrade it. Upgrade went smoothly and I didn't notice any problems until at some point it failed to run 'Software Update' application.
View 3 Replies View RelatedI've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround
View 3 Replies View RelatedI decided to upgrade to Ubuntu 10.04 LTS from Ubuntu 9.10 earlier today. I started the upgrade process, after around 4 hours everything was starting to install. But then certain errors began to pop up. Soon after, the upgrade dialog exited because of too many errors (a screenshot is attached below with other documents).
Right now I have to back up by files and do a fresh reinstall.
Icons are all over the place, some have been deleted, and application menus are "scrambled". Nothing really seems to work except my web broswer, Opera, which isn't a Canonical Ubuntu application.
I have attached to screenshot of the upgrade dialog and the other documents the error dialog wanted me to attach.
I had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
This is on my AMD64 Testing box...A couple days ago during an apt-get dist-upgrade, near the end I saw the errors below.
I haven't noticed anything broken, yet. I usually only see dkms errors when VBox squawks after an update and I run /etc/init.d vboxdrv setup.
The section of the results containing the errors to the end of the output:
Code: Select allSetting up linux-image-4.3.0-1-amd64 (4.3.5-1) ...
/etc/kernel/postinst.d/dkms:
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 - (-30969)
error: cannot open Packages database in /root/.rpmdb
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
[Code] ....
The situation is too strange to be well summarized in a title-topic. I have performed the upgrade from .2 to .3 editing the repos and launching zypper dup.
The boot loader's choises are:
1)openSUSE 11.3 - 2.6.34-12 (default)
kernel image: /boot/vmlinuz-2.6.34-12-default
ram: /boot/initrd-2.6.34-12-default
root: /dev/disk/by-id/ata-Hitachi_HTS541680J9SA00_SB2204SGEZ91VE-part1
parameters: resume=/dev/disk/by-id/ata-Hitachi_HTS541680J9SA00_SB2204SGEZ91VE-part2 splash=silent quiet showopts
[Code]...