I have Ubuntu Server 9.04 running, and have been attempting to install updates/upgrades using apt-get install and keep getting error messages stating could not resolve 'us.archive.ubuntu.com. What exactly does this mean?and is there a workaround. I would like to upgrade to another version if possible.
View 1 RepliesThis is a redirect of the output of command apt-get update to a text file in /home/user
Code: Select allIgn:1 http://dl.google.com/linux/talkplugin/deb stable InRelease
Hit:2 http://ftp.us.debian.org/debian testing InRelease
Hit:3 http://dl.google.com/linux/talkplugin/deb stable Release
Ign:4 http://linux.dropbox.com/debian sid InRelease
Hit:5 http://deb.opera.com/opera sid InRelease
[Code] ...
They all refer to repos that cannot validate authenticity.
# yum update Loading "rhnplugin" plugin Loading "security" plugin Skipping security plugin, no data Setting up Update Process Resolving Dependencies Skipping security plugin, no data
--> Running transaction check
---> Package stunnel.i386 0:4.15-2.el5.1 set to be updated -----> It hangs here and there is no further progress after this stage
During my upgrade I had errors. 3 times the same list of errors.
Once they followed:
Once they followed:
Once they followed:
The errors are:
Should I try to do something about it? My computer seems to be functioning normally.
When I installed Ubuntu 11.04 i went to some blogs to do the classics "10 things to do after installing Ubuntu 11.04". It seems all is fine. But when i do this command in the terminal,
Quote:
sudo apt-get update
I get this errors ("imposible obtener"="can't get", i think this is the translation) in the terminal:
Quote:
W: Imposible obtener http://ppa.launchpad.net/sun-java-co...source/Sources 404 Not Found
W: Imposible obtener http://ppa.launchpad.net/sun-java-co...-i386/Packages 404 Not Found
W: Imposible obtener http://ppa.launchpad.net/tucan/ppa/u...source/Sources 404 Not Found
W: Imposible obtener http://ppa.launchpad.net/tucan/ppa/u...-i386/Packages 404 Not Found
I just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
I am trying to get Ubuntu 8.10 upgraded to Ubuntu 10.10, I'm having all sorts of errors:
Code:
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.
Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'hardy' to 'lucid' entries. If you select 'No' the upgrade will cancel.
Continue [yN] After pressing yes
Code:
I receive the following errors every time the upgrade option appears and cannot get past it.
W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/...ty/Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname)
, W:Failed to fetch http://security.ubuntu.com/ubuntu/di...ty/Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname)
[code]....
I did an upgrade a while back to lenny, but still get these errors..
Here's what I get when O do apt-get update:
I ran an update recently. It was about a 300Mb download and with it was the current kernel and others. I restarted to find an error. Compiz is no longer starting and there is this red minus icon on my bar saying there is a package error. It said to run "sudo dpkg --configure -a" but when I ran that I got: dpkg: failed to open package info file `/var/lib/dpkg/status' for reading: No such file or directory"
View 8 Replies View RelatedThis was also posted under Newbie Forum as I was unsure which was the best spot. On a fresh install of Fedora 12: I am trying to do a software update and keep getting these errors. I am new to Fedora but have used Ubuntu for some time. An Internal system error has occurred:
Under more details it states:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
[Code]...
Now I don't know if those errors each apply to a distinct update but theres about 430 updates available. It looks like maybe I need to add something to the repository? I don't know
I want to Upgrade my system from Fedora 10 to Fedora 11 but when I use: yum -y update, my system comes up with a lot of dependency errors for Fedora 12, Fedora 13, and Fedora 14.
Right now I just want to upgrade to Fedora 11 and dont understand how I have managed to download packages for Fedora 11, 12, 13 and 14.
I've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround
View 3 Replies View RelatedI decided to upgrade to Ubuntu 10.04 LTS from Ubuntu 9.10 earlier today. I started the upgrade process, after around 4 hours everything was starting to install. But then certain errors began to pop up. Soon after, the upgrade dialog exited because of too many errors (a screenshot is attached below with other documents).
Right now I have to back up by files and do a fresh reinstall.
Icons are all over the place, some have been deleted, and application menus are "scrambled". Nothing really seems to work except my web broswer, Opera, which isn't a Canonical Ubuntu application.
I have attached to screenshot of the upgrade dialog and the other documents the error dialog wanted me to attach.
I had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
My machine is running with RHEL 3 and the kernel version that I am using is 2.4.21-37.EL. I would like to upgrade present gcc 3.2.59 to gcc-3.4.6-8. I tried but encountered with errors like dependencies and many more. how to upgrade gcc.
View 5 Replies View RelatedI have Jessie in a VM. For some days I have been consistently getting errors with apt-get update, no matter if I use httpredir of ftp.us. These are the errors:
Code:
Select allErr http://ftp.us.debian.org jessie/updates/main amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/contrib amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/non-free amd64 Packages
[Code] ....
E: Some index files failed to download. They have been ignored, or old ones used instead.
And this is the syntax in my /etc/apt/sources.list
Code:
Select alldeb http://ftp.us.debian.org/debian/ jessie main non-free contrib
# deb-src http://ftp.us.debian.org/debian/ jessie main non-free contrib
deb http://ftp.us.debian.org/ jessie/updates main contrib non-free
# deb-src http://ftp.us.debian.org/ jessie/updates main contrib non-free
# wheezy-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# Jessie Backports
deb http://http.debian.net/debian jessie-backports main contrib non-free
Mirrors cannot be down for so long, so what is going on?
The error message is: "est Transaction Errors:
installing package kernel-debug-2.6.31.6-166.fc12.i686 needs 27MB on the /boot filesystem
installing package kernel-doc-2.6.31.6-166.fc12.noarch needs 27MB on the /boot filesystem
installing package setroubleshoot-2.2.50-1.fc12.i686 needs 27MB on the /boot filesystem
installing package perf-2.6.31.6-166.fc12.noarch needs 27MB on the /boot filesystem
installing package hunspell-1.2.8-13.fc12.i686 needs 27MB on the /boot filesystem
installing package gettext-0.17-16.fc12.i686 needs 27MB on the /boot filesystem"
I have boot as a separate partition, this time around I have set it to ext4 for the first time. That partition is only 250 Mb, but that has always been sufficient in the past, perhaps I am holding too many kernels or kernel versions?
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
I am running Fedora 12 64-bit on a MacBookPro5,1 system. After two weeks of not running Fedora on the system, I boot into it and check for updates with Yum Extender. It only finds a small handful of updates despite the fact that my other system running Fedora 12 32-bit has installed several update over the past two weeks. When I try to apply the available updates I get the following errors: Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package kmod-wl-2.6.32.9-70.fc12.x86_64-5.60.48.36-1.fc12.3.x86_64 (rpmfusion-nonfree-updates)Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package kmod-wl-2.6.32.9-70.fc12.x86_64-5.60.48.36-1.fc12.3.x86_64 (rpmfusion-nonfree-updates)Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)
What is needed to resolve these update issues? Also, I suspect the system is not picking up all the updates that it should. What can I do to determine which updates the system should be getting?
I try to update my kde to kde 4.4.1 from updates repository but i get dependency resolution errors:
Code:
Dependency Resolution Errors:
I checked my system:
Code:
It means i have the newest versions. So how to update my kde?
I did 'yum update' this morning. It stopped with the following errors:
Code:
Install 7 Package(s)
Upgrade 207 Package(s)
[code].....
I'm running UNR 10.04 on a Samsung NC10.Every thing has been working great for the last few weeks since I downloaded and installed - almost everything worked great out of the box! Only 'problem' I was having was pants flash performance but that's a bit of a given I guess.However, this afternoon I did an update + upgrade, then did the required restart.Booted fine to login screen, but it then took a looong time for any thing to happen - before any panels/UNR interface appear, I get 3 errors, one after another.They are:
1. Could not update ICEauthority file /home/matt/.ICEauthority
2. Problem with configuration server /usr/lib/libgconf-sanity-check-2 exited with status 256
3. Nautilus could not create the following required folders /home/matt/Desktop, /home/matt/.nautilus
(I think the third one asked me to create the folders myself and then give it correct permission but not certain)I tried loging into standard Gnome desktop, same errors, same problem. Same with the gnome safe thing.After a while however, I do get one panel, in the top left corner - rather than stretching full width, it's about 2 inches across. On it are some buttons (mail, sound, chat, power, time) but not some that should be (guake, wireless etc)I brought up the run dialogue (Alt + F2) and tried a variety of programs but nothing happened with any (tried firefox, chromium, xchat, terminal)
when I tried to uninstall qmmp (which I had been trialling as a music player) I came across this error.
roy@suzuki:~$ sudo apt-get remove qmmp
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
I am dual-booting with Windoze XP and just this week notice 2 new ubuntu kernel lines in grub when my computer boots.
Not too sure what to do now - it seems I can't install or remove anything. Also, update manager does not work.
I'm totally new to ubuntu and i have a major problem with updating ubuntu, I was looking around for some linux based gaming and came across the online game called "Regnum Online". I installed it and all goes fine until I restart my computer next day, the top panel that usually has daily updates is missing and in its place is a red circle with an x through it I hover over it with my mouse and it reads:
"An error occurred please run package manager from the right-click menu or apt-get in a terminal to see what is wrong."
Which I then right-click and open package manager and it gives the following response:
"E: Type '<!DOCTYPE' is not known on line 2 in source list /etc/apt/sources.list.d/onemyndseye-regnum.list
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report."
At the bottom of this message reads:
"this usually means that your installed packages have unmet dependencies."
I don't want to lose my personal files by wiping and reinstalling ubuntu.
I get errors when I install applications..including errors from update manager when I do a regular update.
Code:
installArchives() failed: Selecting previously deselected package linux-image-2.6.35-25-generic.
(Reading database ...
(Reading database ... 5%
[Code].....
Im running an update through YUM from my CentOS5 64bit box and came across this error:Transaction Check
Error:
I've done some research on this and found solutions on how to rectify (i.e. reconfig YUM repositories etc.) but still same issue.
I'm running CentOS 5.3 x64 within a 32 bit version of Windows XP via VirtualBox. What I'm trying to do is install Eclipse such that I can code in both C++ and Java. I'm going to need to eventually add the OpenMP library, but that's later on. Right now, I'm just trying to get Eclipse to that point, I have the gcc and jre installed...it's just that Eclipse is not wanting to cooperate.
I did uninstall the open-jdk and install the Java SE 6u14. java version "1.6.0_14" Java(TM) SE Runtime Environment (build 1.6.0_14-b08) Java HotSpot(TM) 64-Bit Server VM (build 14.0-b16, mixed mode)
And the gcc... gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
I was able to install the Eclipse SDK using yum...
Eclipse Platform
Version: 3.2.0
Build id: M20060921-0945 (CentOS release 5 (Final))
However when I go to update it using Eclipse's update utility to install from the Eclipse Project Updates (in this case, Eclipse 3.2.2 update) I get:
Unable to complete action for feature "Eclipse Platform" due to errors.
Unable to complete action for feature "Eclipse RCP" due to errors.
Unable to create file "/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp". [/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp (Permission denied)]
[Code].....
This is on my AMD64 Testing box...A couple days ago during an apt-get dist-upgrade, near the end I saw the errors below.
I haven't noticed anything broken, yet. I usually only see dkms errors when VBox squawks after an update and I run /etc/init.d vboxdrv setup.
The section of the results containing the errors to the end of the output:
Code: Select allSetting up linux-image-4.3.0-1-amd64 (4.3.5-1) ...
/etc/kernel/postinst.d/dkms:
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 - (-30969)
error: cannot open Packages database in /root/.rpmdb
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
[Code] ....
The situation is too strange to be well summarized in a title-topic. I have performed the upgrade from .2 to .3 editing the repos and launching zypper dup.
The boot loader's choises are:
1)openSUSE 11.3 - 2.6.34-12 (default)
kernel image: /boot/vmlinuz-2.6.34-12-default
ram: /boot/initrd-2.6.34-12-default
root: /dev/disk/by-id/ata-Hitachi_HTS541680J9SA00_SB2204SGEZ91VE-part1
parameters: resume=/dev/disk/by-id/ata-Hitachi_HTS541680J9SA00_SB2204SGEZ91VE-part2 splash=silent quiet showopts
[Code]...