My RHEL 6 computer at work cannot have access to the internet. Is there any way I can upgrade my kernel without internet access? I do ofcourse of another PC with internet access and a USB flash drive.
View 2 Replies
I have just built a PC based around an i7-860 and Asus P7P55D mobo. It was running fine until the big update that happened today and now the internet is like treacle. I did the same update to my other (different hardware) PC and all is fine with it.
When I load the earlier 2.6.32-21 kernel instead of 2.6.32-24, the new system works as it should and the Internet is very fast. This suggests to me that the kernel update is the problem, most likely the NIC driver. This motherboard has a Realtek 8112L NIC fitted.
Has anyone else had this issue and what is the best way around it other than loading the older kernel and hoping that the next update will fix it?
We bought a board with vortex 86x processor. we tried to install RHEL6 beta version. when we select the installation choice we were getting below error: "This kernel requires an i586 cpu, but only detected an i486 cpu. Unable to boot please use a kernel appropritate for your cpu."
We have contacted the board personal. he said(in his words)"If you need to use redhat, you have to use the config & patch file provided in the development note to develop a kernel which is suitable for redhat."
I have a very unusual [and most likely unsupported] upgrade path I need to take.
I have two servers, both Dell PE1800's that I need to upgrade.
One of them is a Fedora Core 4 (x86) box and the second is RHEL5 x86_64.
I need to do an in-place upgrade to CentOS 5.3 without having to reinstall from scratch and keeping my downtime to an absolute minimum. Each of these servers has about 10TB of data stored and I really don't want to have to reformat and restore from backps.
How can I do this?
I am facing an high CPU Usage 800% in a(Quad CPU, RHEL 64 bit kernel) with my C++ application .
The details are below:
1)The C++ Application has been compiled in RHEL (2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux)32 bit server(Quad CPU 8 cpu) in Dev lab. When this application has been tested for 12 hrs in the Dev lab, the CPU usage is varying between 20% to 50% .
However, when the above C++ application deployed in production which is RHEL (2.6.9-67.ELsmp #1 SMP Wed Nov 7 13:56:44 EST 2007 x86_64 x86_64 x86_64 GNU/Linux)64 bit server the CPU usage is found to be increasing constantly to 800%.
2)When the CPU reached to 800% in Production Server, we have taken the pstack of the C++ Application process by using the command pstack p [captured thread id ] and we found that the pstack is showing the high CPU
usage (800%) in below libraries:
If there is any GLIB /pthread library/any other differences between 32 bit and 64 bit kernel. Since the application has been compiled in a 32 bit kernel and deployed in 64 bit kernel. Please provide your support on the same.
My machine is running with RHEL 3 and the kernel version that I am using is 2.4.21-37.EL. I would like to upgrade present gcc 3.2.59 to gcc-3.4.6-8. I tried but encountered with errors like dependencies and many more. how to upgrade gcc.
View 5 Replies View Relatedi have old RHEL 3 system which has kernel 2.4 installed into it. I wasnt to upgrade it to RHEL 5.x so i downloaded a kernel 2.6 package but was not able to compile it.
View 1 Replies View RelatedThe RHEL 4 update 7 installation CD installs the kernel with version 2.6.9-78.EL and therefore must contain corresponding vmlinuz and initrd.img. However I would like to have an all modules initrd that is used during installation but for a different version (2.6.9-78.0.13.EL). Is there a way in which I could obtain/make such an initrd?
View 3 Replies View RelatedIf i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies View RelatedAny one has managed to do a kernel upgrade on Fedora 14, or even attempted, from binary.
View 3 Replies View RelatedI just updated my kernel to 2.6.34.7-56.fc13.x86_64 last night and now I have no system sounds. Audacious plays my mp3's just fine, just as all my multimedia works in my web browser, vlc, etc... The only thing being affected is system sounds. I tried playing a sample with aplay and I got loud, crackling nonsense and this output code...
View 4 Replies View RelatedMy Fedora 11 Acer Aspire One system updated today from Kernel 2.6.30.9-90.fc11.i586 to kernel 2.6.30.9-96.fc11.i586
On reboot, the lower panel on my Gnome desktop is missing the 4 rectangles for selecting desktops 1-4. Also, when you open Firefox, terminal etc, there is no tab on the lower panel either.
Is there a way to get them back?
After seeing that Starcraft 2 had a Gold rating with Wine I decided to try it out on my 64bit F13 system. Unfortunately I seem to get the ACESS_VIOLATION error due to kernel issues (see http://appdb.winehq.org/objectManage...estingId=55485. This issue has apparently been fixed in 2.6.35 so I'd like to upgrade my kernel.Is it a good idea to install the kernel and nvidia drivers from the F14 repositories on a F13 system? Are there any pitfalls that I should be aware of?
View 5 Replies View RelatedIs there an easy way to upgrade kernel to 2.6.38?
Or do i have to compile a custom kernel?
I have a HP ProLiant DL580 G2 running a freah install of Fedora 9. After doing all updates and re-booting the sys monitor only shows 3.7gb of memory with actual 8gb installed.
Not sure what is going on. Current kernel version is: 2.6.27.9-73 fc9 .i686
I was under the impression that F9 was a PAE kernel. But doesn't look like it to me?
Do I need to upgrade to Fedora 10? Or install a PAE kernel?
If a new kernel, what do I do? I'm new to Fedora 9 and big iron servers.
I am running fedora 12, x64. How can I upgrade fed12 as such? (apart from compiling the kernel myself)
View 3 Replies View Relatedafter upgrading to kernel 2.6.34.6 I have two issues which I don't know how to solve. First and more important is an issue with boot process. The boot is ok until it is supposed to switch to gnome desktop. Then suddenly the graphics become a weird line pattern with no discernible features. Only a rectangle which moves upon moving the mouse. This can be resolved by switching to a console, logging in there and killing the gnome-session. (with kill -9) Then, instantly the desktop appears as usual, the background is loaded, the panels come up and all seems well.
I have no clue what causes this. I thought there's a display driver problem but since I can actually get back to the normal graphics state I'm confused. Also glxinfo says:
Code:
[Me@Plato ~]$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI R600 (RV620 95C4) 20090101 TCL DRI2
Secondly the nm-applet doesn't work until restartet. Normally I expect to see an authorization request window, prompting for my passwd to start wireless networking, and the little icon in the panel. Both don't show up until I kill the nm-applet process and restart it. After I do this everything is back to normal and working as expected.
I assume if problem one is solved, two won't be a problem anymore because I expect the password dialog hidden somewhere in the background when the graphics is all garbled..
Edit: Failed to mention thath my graphics card is ATI3470 as shown in the signature...
I upgraded my F13 kernel from 2.6.33 to 2.6.34. But, the newer kernel isn't booting. It starts the booting process and then goes idle. how shall I troubleshoot?
View 2 Replies View RelatedI just updated my kernel on Fedora 13. The bug update thing popped up, I clicked install, it asked me to restart, I did this, now the loading bar on boot gets to the end then stops and goes no further. A google search showed people using older versions of Fedora have had some issues similar because of their nVidia graphics card, which I also have, however I can't find a solution. There is no terminal to play with, no error message, so I have very little to go on. I have a java project for uni on there I need to rescue so any help would be very welcome.
Extra update, while starting up I pressed esacpe and was giving the option of an interactive start up which pretty much confirmed it was a problem with the nVidia card, told me that the driver wasn't installed with warning writern (is this a word?) next to it orange writing which didn't seem to positive. It seems that spamming escape earlier in the boot lets me play with grub. Using the old kernel to boot doesn't seem to help. So ready for those solutions now.....
I am relatively new to the Linux System (8 months). I am having issues after upgrading the Scientific Linux 6 kernel from its current 2.6.x version to the latest version that SL6 has available. The issue is that once I install the upgrade and reboot, the internet becomes extremely laggy when scrolling on web pages, so much so that you get a ripple like effect as your scrolling. Which doesn't occur in the current kernel i am using.
Current Kernel is: 2.6.32-71.18.2.el6
New Kernel RPM update is: 2.6.32-71.29.1.el6
I wish I could figure out the problem but I am having trouble identifying what exactly the current kernel has that the new one doesn't that would cause the internet lag. I have read other topics with similar kernel update problems, but none have expressed an internet problem & only an internet problem from a kernel update.
Under Fedora 9 everything was fine. Now, when loading web sites, about half the time, there is a pause of several seconds before the page starts with a message in the status bar of "Looking up <domain name>". Seems like a problem with name resolution. Half the time, this isn't an issue ... wierd.
/etc/resolv.conf:
Code:
; generated by /sbin/dhclient-script
search hsd1.ct.comcast.net.
nameserver 68.87.71.226
nameserver 68.87.73.242
nameserver 68.87.64.146
I recently installed F13 on my Toshiba Satellite C650. It has a buggy ACPI which no linux distro till date supports. I got that covered though. But my problem is that the ethernet port works only if the kernel is >=2.34. But F13 came with 2.33.
I do not have an access to a wireless network. Please tell me how to update the kernel without connecting to internet directly. I am new to Fedora. I have been using Ubuntu for some time and this can be achived in ubuntu by downloading the DEB packages and dependencies.
Yum 'pre-upgrade' added new kernel to menu.lst, but I don't boot from that GRUB; I boot from GRUB on another partition. The new kernel is ready to install, but the GRUB that I boot with ain't linking' to the pre-loaded kernel.
Code:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,3)
# kernel /boot/vmlinuz-version ro root=/dev/sda4
# initrd /boot/initrd-version.img
# boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,3)/boot/grub/splash.xpm.gz
hiddenmenu
title Upgrade to Fedora 10 (Cambridge)
kernel /boot/upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=hd:UUID=cc9cedeb-1f14-4cf7-8b4e-ce05acd8c4e7:/boot/upgrade/install.img ks=hd:UUID=cc9cedeb-1f14-4cf7-8b4e-ce05acd8c4e7:/boot/upgrade/ks.cfg
initrd /boot/upgrade/initrd.img
title Fedora (2.6.23.1-42.fc8) <---This is the current entry from OTHER GRUB.
root (hd0,3)
kernel /boot/vmlinuz-2.6.23.1-42.fc8 ro root=LABEL=/1 rhgb quiet
initrd /boot/initrd-2.6.23.1-42.fc8.img
I cant boot into Fedora 10 using the latest kernel. It just hangs after grub, I can still boot into an older kernel. The problem is its a fresh install that I ran a full update on straight away, and now I cant install videoaudio drivers because the kernel-header packages (and others) are installed for the latest kernel. Is there any boot parameters I can try to add when booting that might help?
View 5 Replies View RelatedThe -162 kernel upgrade just released failed to boot in my x86-64 system. Additionally, both previous kernels failed in (probably) the same way. The progress icon proceeded all the way to its 'f' image, and then hung. I touched escape key, and found several disturbing messages among a dozen or so lines --
mdadm: No arrays found in config file or automatically. A dynamic linking error occurred: /lib64/multipath/libcheckdirectio.so: no such file or directory awk: cmd. line:1: fatal: cannot open file `/etc/inittab` for reading (Invalid Argument). Init: rcS post-stop process (807) terminated with status 2s. I got into rescue mode with my install disk, then looked for libcheckdirectio.so in /mnt/sysimage/lib64 but it was not there. Also, locate -d /mnt/sysimage/mlocate/mlocate.db/libcheckdirectio.so found nothing.
Ran chroot and executed the fakd diagnostic (which I had not seen before) and rebooted. Same problem - although now the screen is telling me SELinux is requiring a targeted policy relabel. My dual-boot-to-vista system has been erratic (requiring fsck several times, and confounding the Vista partition to require file checks), primarily since a large install of Eclipse and multiple plug-ins AFAICR.
I've just gotten another kernel upgrade, and need to copy it to a bootloader on another Linux sytem, so Fedora will boot, using legacy grub. The problem is that when I check /boot/grub/grub.conf, I get title Fedora (2.6.34.7-66.fc13.i686) root (hd0,2)
[Code]...
It's all Greek to me, but evidently it means something to grub, as that's what is in the Fedora kernel(s) that work. I can't find where this "bunch of stuff" is for the new kernel, so I can paste it into the grub file on the other system. The other system is Linux Mint9, and I've made Mint work using (legacy) grub, and deleted grub2 so that it's no longer Mint's bootloader.
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
I have problem with my wifi hardware. After upgrading kernel from 2.6.35.13-88.fc14.i686 to 2.6.35.13-91.fc14.i686, my wifi is deactivated.
I'm using fedora 14 in my netbook HP Mini 210 (wifi broadcom).
I upgraded from kernel-2.6.38.6-27.fc15.x86_64 to kernel-2.6.38.7-30.fc15.x86_64. After the upgrade I no longer have a wireless interface in Network Management. I have a broadcom BCM4312, booting the previous kernel solves this problem.
View 9 Replies View RelatedHave been having my share of (nvidia) problems since last kernel update to fc11. Just can't seem to get x-server to work...
(Seems to me that I have had better luck with the 173xx legacy driver..Should I try that?...which one?..
I'm thinking: 173.14.20-1)...
Information; fc11 Leonidas i586 32 bit ..nvidia GeForce 7300 LE....ViewSonic VX922 19" LCD monitor
[root@Xray ~]# rpm -qa | grep -i nvid | sort
kmod-nvidia-190.53-1.fc11.4.i586
kmod-nvidia-2.6.30.10-105.2.23.fc11.i586-190.53-1.fc11.4.i586
nvidia-settings-1.0-3.2.fc11.i586
nvidia-xconfig-1.0-1.fc11.i586
[Code]....
Have blacklisted Nouveau in Modpobe... (Haven't done anything to grub.conf)... Have also tried to go the akmod route; but have never been able to make it work..
Have followed the instructions from Post 2 at the beginning of this thread; but I do get a message that says: "No package xorg-x11-drv-nvidia-libs.x86_64 available". I do have both rpmfusion repositories downloaded..
