How do i add the default normal user to the sudoers group? Is it normal for the main user to be kept out of the sudoers group or did i do something wrong during install?
View 2 RepliesThe normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies View RelatedI want to ask a question maybe a stupid one Here what i understand saying linux user : i can create various users for example for me , for my brother and so on to log in to system. But what does it mean that apache runs under user wwwrun and group www by default . What kind of user is that ? It's explicitly not a user kind that one I know about .
View 6 Replies View RelatedI have previously set up sudo via adding my name to the wheel group and then giving full privileges to the wheel group in the sudoers file. Now I choose to learn to limit that. Had noticed the most frequent use I have of sudo is to run yum update. This got me thinking, could I remove the wheel group privileges and add the following line in sudoers to limit the privilege to simply running yum, and furthermore, make it so I could run yum without a password:
## Allow root to run any commands anywhere
rootALL=(ALL) ALL
Troy ALL= NOPASSWD: /usr/bin/yum
I think that would in fact work (if I understood one of the pages here, it will work). However, upon further thinking I realized that in such a case then anyone sitting at my computer could then use yum, without a password, to install or remove any file on my system � probably not a good idea. As a result I have to ask, can I tighten the privilege even further such that the only privilege so given was to run �yum update� and nothing else? (for example if they ran �yum install� it would fail). If you can do it, how?
Last, I was going to limit the privilege, time wise and try wise, by adding the following to the sudoers file:
# Defaults specification
Defaults:Troy timestamp_timeout=0, passwd_tries=3
Will that really work to limit the elevated privilege so I don't have elevated privileges lingering about, or is there a better way to do so?
I recently installed Fedora 13 "Goddard" using the graphical installer (although I prefer the 'text/ reduced graphics' option.When I start the system (after installation completes), it runs in graphical mode and presents me with a graphical login prompt. However, due to security reasons (I'm told), it won't let me log on as the root/ admin user (which is fair enough).If I log on as another user (eg : alpha, charlie or delta, for this example), I can't edit the sudoes file to add one of these users (alpha) to the file. This is because these users aren't in the file, as far as I know.
At no stage during installation was I offered an option of either setting the runlevel or adding a non-root user to the sudoers file.I have found a way to change the runlevel setting, so that is not really an issue.What I would like is either of the following :
1. A modification to Fedora's graphical installer that allows for an explicit option to set the runlevel (graphical/ command-line) and another option to add the first created non-admin user (alpha in this example) to the sudoers file.
2. Information on how to add a user to the sudoers file without adding all others (eg : alpha, but not charlie and delta, in this example).
I have read the relevant man and info pages for the su, sudo, sudoers and visudo commands, but I only got confused. (I don't know BNF/ EBNF and I would like a solution that doesn't involve having to learn these BNF dialects, although I will if I have to.)Also, I have seen solutions that show how to add all users, but not individual users, to the sudoers file. What I want is to add an individual user (if this isn't clear already).Please feel free to send me an e-mail about this post : nigel.nq.ngw[at]gmail[dot]com with the subject line "Linux Forums - Fedora 13 Add User to Sudoers"
How do I add myself to the Sudoers File? When I go to use the "Sudo" command, it tells me I am not in the Sudoers File, so I have to do "su -" to bypass it for the time being. How do I add myself?
View 12 Replies View RelatedI wanted to do an installation from my user login so I typed
sudo make install
then it says
<my_user_loggin> is not in the sudoers file. This incident will be reported.
How to correct this matter...
How can I create a user group that restricts Internet privileges to only members in the group, then I will assigns certain applications to join the group for access to the Internet.
For example, I want only group net to have access to the Internet. Group net is then connected to:
Code:
So far, I am using the gnome group policy manager that is standard with ubuntu but Its not working. It is possible that im misdirected and that I should use a firewall instead?
Is there any way to use 'fdisk -l' as a normal user? I see in F12, /sbin has been added to PATH by default for a normal user, but when trying to use it, nothing shows up.
See below for demonstration purposes:
Code:
Password:
I don't want to use 'su -' or 'su -c' and login every time.
Quote:
Originally Posted by G�del
It gets me within a mile
how i am auto mount the ntfs drives through the normal user with out asking password... I need it and also one thing is i want two drives only auto mount and when i open the other drives it should ask the password?...
I can switch to root by typing "su"After having done something, I hope to switch back to original normal user. What's the command,
View 3 Replies View RelatedIf sound on F12 works as root user but not as a normal user, try this simple fix! I've been struggling to get sound working as a normal (non-root) user since F10. Until now I've had to run X as root user to get any sound out of my machine.
Sound actually works OK now for me as a normal user. Here's how I fixed the problem.
First I uninstalled pulseaudio with:# yum remove pulseaudio Then reboot back to the hardware. You might want to keep pulseaudio, but I have no need for it. PA wasn't running on my system anyway.
Running X as root user, I did the following: As a test I opened a root shell and typed the following:
[root]# alsamixer c0 That started the alsamixer OK, and all the controls were accessible.
[Code]...
Problem is that I can't burn disk using nero linux as normal user. If I try to do so, it tries to create a .nrg image in the drive rather than burning those files in the disk. But if i run nero as super user then it works okay. If I run it as normal itan't even recognize my burner
View 2 Replies View RelatedI'm trying to start an Oracle Integration server as user "oracle" at system startup and my approach was to place a couple of lines in /etc/rc.localsu oracle/home/oracle/startallSomething is not quite right about this as it seems to leave some processes owned by root.
View 2 Replies View RelatedMy screen capture software, shutter and system's default "take screenshot", do not function normal any more. It can only capture the desktop wallpaper, not any other elements on the desktop, nor any other opened windows. It's just like taking an x-ray picture by passing all the other objects/elements/running programs on top of the desktop wallpaper. Any ideas? I am using Fedora 14 64 bit. The screen capture software were working fine, though.
My screen capture software, shutter and system's default "take screenshot", do not function normal any more. It can only capture the desktop wallpaper, not any other elements on the desktop, nor any other opened windows. It's just like taking an x-ray picture by passing all the other objects/elements/running programs on top of the desktop wallpaper. Any ideas? I am using Fedora 14 64 bit. The screen capture software were working fine, though.
I am running Fedora 12 OS on my machine. I would like to disable the USB devices for normal users so that usb-storage devices cannot be plugged in. However at the same time a mouse or a keypad may/could have a usb connection. note that root should be able to use the usb storage devices. How can the same be done on fedora 12? I would prefer not to do it via the BIOS options.
View 6 Replies View RelatedI am using fedora 12.I have two internal drives. Both are ntfs. Whenever i click on them it prompts to enter root password. But i want to mount them as normal user without entering any root password. How can i disable it so that i am not asked to enter root password everytime i mount the drives.
View 2 Replies View Relatedi have to install app server on VM of Linux box. am able to connect Linux box via puTTY and Xmanager as root user. but am not able to connect as a normal user. in Xmanager i see network error. In puTTY console gets disappear
View 1 Replies View RelatedMy X server restarts as soon as I log in as a regular user. Root user has access. I can log in both root and normal user in terminal and over SSH. I tried rebuilding and installing the proprietary NVIDIA driver, as it builds it's own config file for X. I've had no previous problems with X on this system. The last major change to the system before the last log out was the installation of MCNP5. MCNP5 was installed under the regular user; no root privledges were needed.
View 8 Replies View RelatedI'm using fedora 12 and modified the user login options(normal and super user login). I've been using the accounts for a while but i've bumped into a problem - audio not working as a normal user but works when logged in as root. Also, i'm not able to use VLC as a root user.
View 1 Replies View RelatedI am learning about group and user management with Fedora and can change the user's group using the usermod command but did not know if there was a command to see the group currently associated with the user.
View 3 Replies View RelatedI'm using a fedora install mainly for audio work and have everything working well out of the box. My setup is simple:
-Direct cable from Guitar 1/4" > Sound Card input>Rakarrack Guitar Effects>Ardour>System Out
(Occasionally I put a synth/plugin like Zynaddsubfx or jackrack before or after rakarrack depending on what sound I'm going for)
-Jack for all audio transport with synthesizers
I have real time support with Jack and all other programs except Rakarrack. When I launch Rakarrack in the terminal, I get this message:
Code:
rakarrack 0.6.1 - Copyright (c) Josep Andreu - Ryan Billing - Douglas McClendon - Arnout Engelen
Try 'rakarrack --help' for command-line options.
Cannot lock down memory area (Cannot allocate memory)
Cannot use real-time scheduling (RR/15)(1: Operation not permitted)
AcquireRealTime error
However, running rakarrack in root does not display this output, and I assume it has no problem getting real-time scheduling in that case. I did some google searches but the only similar issues that I find are that people can't get RT support in jack except in my instance, I do have RT scheduling with jack, but for some reason I can't get it in rakarrack unless I'm root.
[Edit] I actually have to run jackd and rakarrack in root to get rakarrack to use real time scheduling. But, it isn't necessary for any other jack compatible program that I know of. I'm actually not getting any real time scheduling with any jack application, even though Jack is reporting to be running in Real Time. However, running everything in root fixes the issue even though I would prefer to not have to run as root.
I have installed debian 6 recently, and during installation I selected not to allow root login (and thereby enable my standard user to use sudo).If I check sudoers (by using visudo) my standard user is not listed anywhere, but he can still use the sudo command without any problems.Where else could this permission be stored?
View 5 Replies View RelatedI'm able to mount ntfs file system as root user but I want the same thing to be allowed to normal user .
I'm not much familier with linux environment so please explain me how to do that for normal user.
How do I add user xyz to sudoers?
View 1 Replies View RelatedI have a bit of a problem... I thought (for certain reasons) I would just add myself to root group and therefore gain some more rights for my account. I could sudo before... But once I gained the root group as a secondary group it says I am not in the sudoers file anymore...
Code:
id
uid=1000(kosta) gid=1000(kosta) groups=0(root),1000(kosta)
Code:
sudo ls
[sudo] password for kosta:
kosta is not in the sudoers file. This incident will be reported. It is really weird and messed up. I can view sudoers file but not edit it... I can cat passwd but I can not view syslog. Is there any way to fix this without having to reboot to recovery mode? And why the heck is this happening after all?
How do I add a user in a sudoers file.
View 6 Replies View RelatedI have a question that i want to make a normal user to execute the commands which the root user is able to execute, say if i have a user named siru and when i logged in using siru i cannot run commands like tracert,nmap@loccalhost and all but i can run when i have logged into root account so my question is how to make siru to run the command tracert,nmap@localhost.I have even edited the .bash_profile of siru's home directory from
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
[code]...
I get this message if i try to use sudo/gksudo. What causes this, how can I solve it? It has been working for years. If i remember correcttly there was a sudo update few days ago, maybe it doesnt work since then, i havent used it in the last few days.
View 9 Replies View RelatedI have a fairly complicated request The short version is, I want to set up a system so that any user can change the ownership of a certain set of files at any time without root access. I think it's possible to set up sudoers to do that, but so far I have failed miserably.I have tried setting up a wrapper script around chown, then putting that script into sudoers, but it didn't work. Here's the script and sudoers (paths changed to genericize them):
Code:
#!/bin/bash
#this script moves a copy of the code
[code]....