I'm using fedora 12 and modified the user login options(normal and super user login). I've been using the accounts for a while but i've bumped into a problem - audio not working as a normal user but works when logged in as root. Also, i'm not able to use VLC as a root user.
View 1 Replies
I am using fedora 12.I have two internal drives. Both are ntfs. Whenever i click on them it prompts to enter root password. But i want to mount them as normal user without entering any root password. How can i disable it so that i am not asked to enter root password everytime i mount the drives.
View 2 Replies View RelatedThe normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies View RelatedI have a Red Hat 4 server with Sungard Luminis installed on it. I was following some instructions on setting up Luminis to start at boot. One of the steps was modifying the sudoers file. Since modifying the sudores file, I am no longer able to "su" to root when logged in as a normal user. When doing so, I get su: incorrect password after putting in the password. I have another server with the exact same setup, broken one is test, the other is production, that works just fine. I made no changes to my production server. I've been looking at different things all day and the only difference I have found between the two are the results I get from running rpm -q --verify coreutils. Running that on my prodution server returns nothing. Results from my test server are below. Is this what is causing my problems? If so, what's the fix? I haven't found that yet. I've checked /etc/pam.d/su, both servers are the same.
rpm -q --verify coreutils
.....UG.. /bin/basename
.....UG.. /bin/cat
.....UG.. /bin/chgrp
[Code].....
I would like to allow normal users to run some root scripts (e.g the sound subsytem [alsa]) in cases sound is stuck. What is the best way to allow this to happen in opensuse? There are many ways to do that (and I do not know how to use any of them ) and I am not sure which one is more suse all right.
View 6 Replies View RelatedIs there way we can restrict root to su to normal user. Or at least a way to prompt for the password when root tries to su <username>.
View 3 Replies View RelatedWhen I try to login root from my normal user, I can see this:
Code:
Cannot exec /usr/libexec/openssh/sftp-server: File or directory doesn't exist
(Translateted from my nativ language)
I think that is my bad shell configuration so I check file /etc/ssh/sshd_config and see in the end (this lines couse this bug):
Code:
Match User root
ChrootDirectory /home
AllowTCPForwarding no
X11Forwarding no
[Code].....
Because I have a flaky wireless device, I occasionally get a hung connection and this script gets things running again in just a few seconds except obviously the boldfaced item, as it still tries to run in the root directory and gives errors:
Configuration file "/root/.kde/share/config/knetworkmanagerrc" not writable.
Please contact your system administrator.
So I am not sure how to get knetworkmanager to run as me, the user ubuntu in the /home/ubuntu directory
#!/bin/bash
service network-manager stop
sleep 1
killall -9 knetworkmanager
[code]....
I need to login as root , when linux starts to show login window
But it shudnt be as
1) spawning a new terminal and do commands lik startx -- :3
2) without going in recovery mode
I need to login through login window as normal process
I am using Slackware 13.0 and i have managed to work with my USB pen-drive as root but i cannot do it as a normal user.
View 14 Replies View RelatedI'm trying to get my backup script to run every week, but as a normal user, and not as root as it is done when the script is placed in /etc/cron.weekly. Anacron fits my needs in the sense that it doesn't require my computer to always be on, as opposed to cron, and will just run my script when it can, but at the most each week. Cron fits my needs in the sense that I can run the script as the user I am logged in as. The particular script backs up my home directory with rdiff-backup, and it is very convenient that I am the owner of that backup, since when root performs the backup, I am unable to browse my own backup files and must use "sudo" to do this.
Is there a way to let me use the feature of anacron that allows my computer to not always be on, but still get a weekly execution, and also run the script as a normal (non-root) user?
On a Fedora Core box, I have a normal non-privileged user and I also have sole access to the root account. Because I am the only administrator of this box, I frequently su over to root for administrative tasks. The problem is that many of the user configuration I've become accustomed to are only configured on my day-to-day account (.vimrc, .bashrc, .screenrc, etc). Other than giving my day-to-day user account privileges to perform administration tasks, how would I go about sharing configuration between these two accounts?
View 1 Replies View Relatedi am looking for a detailed description of the login process for both root and normal user , also locally and remotely.i read some sentences that the files .bashrc and bash_profile are needed for this process. But that was very concise.
View 9 Replies View RelatedI'm setting up Ubuntu Karmic on my sister's old computer for my nephew, he's quite young so my sister asked to install some content filtering. I'll first setup an OpenDNS account and I've installed and managed to get dansguardian and squid working on a virtual machine to try it out. so far it's working pretty well, but I need to secure it form the inside out.
I was thinking of blocking specific outbound ports so he could not bypass the proxy. because by default the firefox configuration can be easily changed. so I have a couple of questions.
1. is it possible to block outgoing ports on Ubuntu?
2. is that the best method?
3. is there anything else I should be aware of to prevent subversion?
lastly, this question is probably unrelated to this board but I've set up a cron job to update a dynamic ip with OpenDNS, the problem is that the password is in clear text in the user's crontab, can I play with permissions? is it possible to run the job under a root account and deny read/write access to a normal user?
I just setup a debian OS(in emulator) and trying to use apt-get update. When I log in as root and do:
export http_proxy=http://proxy.com:9090
apt-get update works
If I use another user and ssh to this debian, sudo apt-get update will fail to work because it don't use the proxy. I try to do the export http_proxy stuff again but still not working. echo $http_proxy showing it already set correctly...
p/s:
I have a workaround by adding this lines in the apt.conf
ACQUIRE {
http::proxy "http://proxy.com:9090"
}
but I really don't want this solutions because I want to easily disable the http_proxy in command prompt (by unset it).
If I log in as root I can vi/vim a file with no problems. When I log in as a regular user I get the following error when I try to vi/vim.
[Code]...
Why does vi/vim work as root and not a regular user? Also what rpm's can I install to get it working?
I'm new to Ubuntu and I'm pretty sure I'm just missing something simple. I want to use Samba to share my raid array to all of my machines, so I have...Installed Ubuntu and created a single user: mattMounted my ext4 raid set with fstab:
Code:
UUID=78d85398-d179-4640-bb1b-f770ba90abb1 /media/Data ext4 defaults 0 0
Installed Samba (real Samba, I haven't touched the Nautilus-Share right-click thing):
[code]...
I can't get a program (wbar) to run directly from my user account, it fails saying "Image not found -> maybe using a relative path?". But if I run su -c "wbar", it shows up and manages to load the image. I think it has something to do with ImLib2 or whatever loads the image. I checked permissions on libImlib2.so.1 and it's world-readable and executable. Can libImlib2.a be causing this problem, set to 644? What else should I be checking?
View 2 Replies View RelatedI have a very strange problem.ometimes, yes sometimes not all the time, I get a Destination Host Unreachable when I ping a computer on my network. If I switch to root using su I can ping that same computer. Here is a screen shot:
joseph@laptop:~$ ping 192.168.1.14
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
From 192.168.1.9 icmp_seq=2 Destination Host Unreachable
[code]...
I cannot find a post that matches this scenario...the id created during the install (from CD) of Karmic has fully usable sound. However, users created from the Users and Groups app do not.
I have made sure that all users are defined to the audio, pulse, pulse-audio, and pulse-rt groups. No luck.
I have followed every step I have read having to do with the alsamixer. No luck.
I have verified that alsa and linux itself are at the latest versions.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedIs there any way to use 'fdisk -l' as a normal user? I see in F12, /sbin has been added to PATH by default for a normal user, but when trying to use it, nothing shows up.
See below for demonstration purposes:
Code:
Password:
I don't want to use 'su -' or 'su -c' and login every time.
Quote:
Originally Posted by G�del
It gets me within a mile
how i am auto mount the ntfs drives through the normal user with out asking password... I need it and also one thing is i want two drives only auto mount and when i open the other drives it should ask the password?...
I can switch to root by typing "su"After having done something, I hope to switch back to original normal user. What's the command,
View 3 Replies View RelatedIf sound on F12 works as root user but not as a normal user, try this simple fix! I've been struggling to get sound working as a normal (non-root) user since F10. Until now I've had to run X as root user to get any sound out of my machine.
Sound actually works OK now for me as a normal user. Here's how I fixed the problem.
First I uninstalled pulseaudio with:# yum remove pulseaudio Then reboot back to the hardware. You might want to keep pulseaudio, but I have no need for it. PA wasn't running on my system anyway.
Running X as root user, I did the following: As a test I opened a root shell and typed the following:
[root]# alsamixer c0 That started the alsamixer OK, and all the controls were accessible.
[Code]...
Problem is that I can't burn disk using nero linux as normal user. If I try to do so, it tries to create a .nrg image in the drive rather than burning those files in the disk. But if i run nero as super user then it works okay. If I run it as normal itan't even recognize my burner
View 2 Replies View RelatedHow do i add the default normal user to the sudoers group? Is it normal for the main user to be kept out of the sudoers group or did i do something wrong during install?
View 2 Replies View RelatedI'm trying to start an Oracle Integration server as user "oracle" at system startup and my approach was to place a couple of lines in /etc/rc.localsu oracle/home/oracle/startallSomething is not quite right about this as it seems to leave some processes owned by root.
View 2 Replies View RelatedI am running Fedora 12 OS on my machine. I would like to disable the USB devices for normal users so that usb-storage devices cannot be plugged in. However at the same time a mouse or a keypad may/could have a usb connection. note that root should be able to use the usb storage devices. How can the same be done on fedora 12? I would prefer not to do it via the BIOS options.
View 6 Replies View Relatedi have to install app server on VM of Linux box. am able to connect Linux box via puTTY and Xmanager as root user. but am not able to connect as a normal user. in Xmanager i see network error. In puTTY console gets disappear
View 1 Replies View Related
