anyone tell me how to configure SCPS Gateway between two end systems. I have configured , but i could not run successfully. Both end systems could not communicate each other after running gateway command on both systems. Please provide me a solution.
View 2 RepliesI am doing a project based on the AD-HOC network. i have to do this on the two linux systems currently i am using fedora 13 and opensuse 10.3 beacuse the two laptops supports only these. the exact problem is how to configure the adhoc network to connect these two systems urgent reply needed please
View 1 Replies View RelatedI am using Fedora 10. I have a network design like that:
WinServer --- (r1)router(r0) --- (eth1)LinuxPC(eth0) --- intranetPC
All netmask is 255.255.255.0
WinServer network is 192.168.1.0/24
intranetPC network is 10.10.0.0/24, gateway is IP of the LinuxPC(eth0): 10.10.0.2
Router:
r1 -IP: 192.168.1.253
r2 -IP: 10.10.0.253
LinuxPC
eth0 -IP: 10.10.0.2
eth1
-IP: 10.10.0.40
-GW: 10.10.0.253
I search in Internet several days to find how to configure the LinuxPC to a gateway. The LinuxPC can ping and connect the WinServer and intranetPC correctly, but the intranetPC cannot ping and connect the WinServer network.
I used the webmin to configure the Gateway.
I used the iptables to set allow all connect, than
iptables -t nat -A POSTROUTING -eth1 -j MASQUERADE
iptables -A FORWARD -i eth0 -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forward
In "/etc/sysconfig/network" add "FORWARD_IPV4=true"
As per the subject really, is it possible to configure sendmail to use my ISP's SMTP gateway? If so, how?
View 10 Replies View RelatedAs a new user I like to know how to configure ip address, gateway etc in ubuntu 9.10. I used opensuse 11.1, their I can manage to do these but ubuntu I did not find anything.
View 2 Replies View RelatedI am testing MINE protocol now. I got the basic concept of MINE protocol, but i dont know how to configure MINE protocol by creating a tunnel between two systems.
I did this configuration with linux boxes for GRE protocol.
creating a tunnel for MINE protocol and give me configuration details.?
When I try wget URL... I get failed: connection timed out.I have created br0 as a bridge over eth0 to run this VM. The host has this IP 172.30.8.135.The host has access to internet through eth0 and this is the output of route inside the host.
View 1 Replies View RelatedI successfully configured my local DNS server. I have server1.mydomain.com, pc1.mydomain.com and so on ..
The problem is that my website is hosted on an external server (not on the local network), so www.mydomain.com is not found in the configured zone/subnet
How can I tweak my DNS to fetch ALL subdomains from the gateway (just as it went before the DNS existed)?
I am new in using Debian 5.0, my wireless doesn't work I make a search to know how to do it.
So I open "Terminal"
$ su (press enter)
I wrote the pwd
than when I wrote : # gedit/etc/apt/sources.list
I found this:
bash: gedit/etc/apt/sources.list: No such file or directory
I didn't know what to do, I proceed with: # apt-get install ipw3945 modules-$(uname-r) ipw3945d firmware-ip3945
bash: uname-r: command not found
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package ipw3945
I could not able to configure the default gateway ip address onto the system. i use the route command (" route add default gw 192.xxx.xxx.xxx eth0 ") to add a default gateway onto the routing table but it is "disappear" in the routing table when i had restart the service network.
View 3 Replies View Relatedi did install opensuse and everything ok; i did configure it to be the server and gateway for a little office network Everything seems to be ok most of the time but sometimes (usually between 5 and 7 pm each day) internet stops working and there is no way to let it start again. So i turn off the suse, switch all cables to the old fedora server, just turn it on fedora and internet works. Turn off fedora, connect suse, let it start and everythng ok...it happens all the times
View 9 Replies View RelatedI need to place an Ubuntu machine on a network where I have a DHCP server which does not configure the Degault Gateway parameter (we don't want ordinary users to browse the internet). Is it possible to leave the machine using DHCP and define the Default Gateway manually (as in Windows XP i.e.)? How?
View 1 Replies View RelatedI have been running one computer with Fedora 9 and one with Windows XP Pro. to conserve space, I have moved the Fedora hard drive into the Windows computer (newer). Both are sata drives and each boots completely on its on. I would really like to make it a dual boot system so I can choose which drive to boot without having to open the case and swap the cables around. The Linux disk is readable by the windows OS but not the other way.
Everything I have read about dual-boot is how to do it at installation time. Is there anyway to do it, without reinstalling one of the OS.
I was trying to connect two systems both running on fedora but I have had some connection problems. Its not getting connected at all. I have no idea why the systems are not getting connected. I used to share files between them when they both had windows installed in them and now I cant share.
View 7 Replies View RelatedI am trying to make my fedora 15 my gateway instead of my old D-Link, but I can't seem to get it working.
View 5 Replies View RelatedAm I the only one to experience this? A couple times a day I get a screen blackout while I am working at my computers. This is happening both to my Desktop, whose specs you can read in my signature, and to my laptop. The blackout occurs randomly, lasts 1-2 seconds during which I get a black screen and, after that, the screen is restored to its previous state and everything runs fine for hours.... until it happens again. My laptop uses the default SGI drivers; my desktop the proprietary nvidia drivers from rpmfusion. It happens while browsing, editing code and even gaming. No messages in system log seem to be related to this.
View 10 Replies View RelatedThere are two Fedora 12 systems which are now refusing to hibernate. The hibernation sequence seems to happen but then things hang indefinitely with a black screen and a blinking cursor, top left. I don't know where to start looking for clues; what do I look for in the logs, could someone please point me to a good hibernate/suspend troubleshooting guide?
One of the systems just recently got out of whack, for no apparent reason; it hibernated great for a couple of years, even as it went through upgrades from Fedora 9. The other stopped hibernating after its F9 -> F10 upgrade. This one lacks non-root hibernation permissions, but when I issue "/usr/sbin/pm-hibernate" as root, it goes through the motions and then hangs at black screen also.
I presently have Ubuntu and Windows XP Pro installed. By using the GRUB loader I can choose which to load.
I would like to install Fedora as a third option, but do not know how this will affect the GRUB and the choices.
I have dual boot on my comp. Windows XP and Fedora 11 Now in both systems time zone is set to Belgrade ( which is my time zone), but when I setup clock in fedora to be, let's say 16.15h, then when I swich to windows it says time is 14.15h. When I setup in windows on 16.15h, and I swich to fedora, it says time is 18.15h. So I can't get accurate time on both systems in no way.
View 6 Replies View Relatedso I get my t410 today. the hdd is 250g with three primary partitions: 1) 1.17g 2) 221g win7os and 3) recovery 9.7g. I plan to install a windows vista, opensuse 11.2 and fedora 12. I know first to shrink the partition to make room. but i still don't know exactly. say, i shrink win7os partition to 40g and create an extended partition of 221-40 =181g, and then add partiton /boot, /swap, /home, /... and a number of partitons for vista and a number of similar partitions for fedora. But I doubt I wouldn't be able to install vista when opensuse installation is done.
View 1 Replies View RelatedI have fedora12 on two pc's, i want to share some files between them which i was not able to do with nfs, so let me know the whole procedure to do that n also let me know where my shared files will be visible
View 10 Replies View RelatedI installed Fedora 14 in a dual boot with Windows 7 (Win 7 came preinstalled on my Vaio, I freed up 30 GB on a hard disk drive and installed Fedora in it).The first reboot took me straight to Windows. I could not find a way to get multiple Operating systems, so I tried looking on the net a bit, and installed EasyBCD. This gave me the option of choosing the boot up OS. But when I choose Fedora in the options, the screen changes to GRUB4DOS which lists Fedora and Other as my two boot options.Selecting either one of these options results in Error 22 No partition found.
View 4 Replies View Relatedduring the boot process mounting other file systems takes a while. Although it ends up resulting [OK] it was not like this before and it used to be was very fast. I took a look at /etc/fstab file which is posted below, and suspected that devpts is the problem. So I commented it out and reboot, but it wasn't helpful.
[Code]...
What is the name of two servers that allow you to share directories between systems?
what is NetworkManager? What does it do when you install a new NIC?
I'd like to share files between two Fedora 14 systems, but I'm having difficulty with making a share accessible via NFS.
Here's what I've tried so far:
Tried following mount commands:
Password:
Unable to find suitable address.
Used both the user and root password with this second mount command.
I am currently using ubuntu 9.04 and I am planning to have a dual boot my system with fedora 12. My computer is quite old and I have RAM of 256 MB DIMM 266 MHZ with pentium 4 processor. So will the dual operating systems work in my computer??
View 2 Replies View RelatedI have one linux server act as gateway which is run on fedora platform. The problem occured recently when it keeps on shutting down itself during the weekend.. I have no idea what caused this autoshutdown. For your info, the server is NOT scheduled to auto-shutdown mode.
View 2 Replies View RelatedI've just installed fedora 10 on my Dell Inspiron 1525, and I can't connect to my wireless net. I know how to manually enter the SSID (and have no clue what a BSSID is), MAC address, and I know it's infastructure (well, it's not ad-hoc, so it must be).
The problem is, my router uses a 64-bit encryption protocol, and there's no '64-bit' key option under Wireless Security's dropdown. Is there any way around this, aside from either changing the encryption protocol, or plugging it in manually (neither of which are options)?
OS:Fedora core 6
I have just changed my gateway address,now I can access internet with my browser but unable to run add/remove software as it says no network connection available,system updates are not working as well. What should I do make these working?
I setup my computer to share printers on home network. So I set my F11 PC for manual ip & it works fine for print sharing but now I can't get to the Internet. I noticed under manual settings that every time I set the gateway & try to apply it, it jumps back to all 0's. If I set it to DHCP, I get to the Internet no problem. I just have 2 wireless configs right now 1 for printing & 1 for Internet but it would be a lot easier if I could just use the one manual setting & get it to keep the gateway setting. I'm using a Linksys WRT54G router. And I do select a manual IP outside the range the router uses for DHCP.
View 7 Replies View Related