Ubuntu :: Blank Screen After A Sudo Apt-get Dist-upgrade / Sort It?
Jan 18, 2011
The only thing I remember being updated is xserver, but I know there were other packages updated.
After the splash screen, a text login is shown. If I do nothing, it goes right to a black screen, but first there are weird red pixels randomly strewn about the screen. If I quickly login via the text screen, it then goes to the same black screen. Either way, there are the weird red pixels and a few flashes of the screen before going black.
This happens 100% of the time.
I have tried:
booting with recovery mode and selecting repair packages (no packages are broken, missing, etc.)
booting with recovery mode and selecting startx with failsafe (same black screen)
booting with older kernels (same thing)
View 5 Replies
ADVERTISEMENT
Sep 4, 2010
I did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.
View 6 Replies
View Related
Jan 19, 2011
Using hd3200 on a lenovo edge 13.
followed this guide to install catalyst 10.12 and everything went fine and drivers got loaded.
Just updated the kernel to the latest version(2.6.35.10-74.fc14.x86_64) and after the reboot, the screen is just blank.
View 4 Replies
View Related
Jul 11, 2011
I am learning linux commands. I just wanted to see what happens when I type
Code:
The screen became blank. Keyboard was not responding. I couldn't do a proper shutdown. I switched off computer by pulling out the plug. When I restarted, I heard a series of beeps (approximately 10 beeps). Then I was dropped to the grub prompt. The problem now is I can not type anything into the grub prompt, because the character 'c' is continously printed across the screen like this:
Code:
I couldn't stop the character 'c' from printing (I tried pressing Esc, Ctrl+C)
The solution is easy. I can reinstall grub from a livecd. Or even reinstalling the entire operating system wouldn't take more than 30 minutes. But I want to know:
1) What exactly happened to grub? What stage does this error belong to (1, 1.5 or 2)? What is the error number?
2) How can running "sudo kill -9 -1" affect grub?
View 5 Replies
View Related
Oct 23, 2010
I have an HP 2730pAfter upgrade i have a blank screen. i don't get a splash screen and i can't alt+ctrl+F6 to get extra terminal.Unfortunately i can't ssh into the box either since i don't have openssh-server installed.Is there anything i can do short of taking the harddrive out and putting it into another box?
View 2 Replies
View Related
Apr 7, 2010
Last night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.
View 9 Replies
View Related
Jan 25, 2011
Just upgraded to 10.04. All is well save one little problem. I use both Gnome and KDE. When using KDE, instead of going back to the login screen when logging out, I get a hanging, blank screen. At the top it says,(starting MySQL database server MySQLD.) I have to shut down PC and reboot. Gnome part works fine.
View 9 Replies
View Related
May 1, 2011
I have a Toshiba Satellite P105. Did the upgrade. Everything went smooth until the reboot. After that the deep black. I am suspecting Nvidia driver. "F" key maneuver brings a flash of the booting process. That is quickly followed by a mosaic screen and a numb computer.
Other than nuking the system and re-installing 10.10 any constructive idea?
View 3 Replies
View Related
Mar 23, 2010
im running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
View 5 Replies
View Related
Dec 22, 2010
Ubuntu 10.10 32 Bit
Wine 1.3.9
Alright so this happens to me after every time wine updates from the wine PPA. Foobar2000 works fine till Wine updates, after it updates it pops up a full sized window and instead of it looking like it should it.... looks like whatever was on the screen when the window opens. It's non functional. I tried using the portable version of wine this time and the same thing happens after a update. This is... sad for me because I use it for transcoding.
Bellow is what was spat at me when I ran it thru a terminal.
Quote:
grammatrain@tprb:~$ wine /home/grammatrain/Desktop/foobar2000/foobar2000.exe -opengl
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:win:RegisterShellHookWindow (0x10066): stub
grammatrain@tprb:~$ wine /home/grammatrain/Desktop/foobar2000/foobar2000.exe
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:win:RegisterShellHookWindow (0x10066): stub
View 3 Replies
View Related
Jan 22, 2011
I had a working ubuntu 8.04.x system. I ran the update manager to upgrade to 10.04.1 LTS. Everything seemed to run fine up to the point where it needed a restart. Upon restart, it spews out a stream of log messages, changes the font of the log messages already displayed, and then the screen goes blank and the system does not respond to keyboard or mouse. It appears as if the system is trying to set up the monitor and messes up.
If I ESC into grub after BIOS boot, I have the option of booting two different kernels: 2.6.32-27-generic and 2.6.24-28-generic. The original ubuntu 8.04 kernel was 2.6.24-24-generic(though I did do some updates might that be the 24-28 kernel?).
Booting the 32-27 kernel results in the behavior described above.
Booting the 24-28 kernel produces a stream of log messages that scroll past to fast to read and drops into ash. One of the last messages is: !ALERT /dev/disk/by-uuid/ xxxxxx does not exist -which is true because there is very little in the /dev directory.
View 4 Replies
View Related
Jan 18, 2010
I am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
View 3 Replies
View Related
Oct 13, 2010
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
View 2 Replies
View Related
Apr 3, 2011
I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.
Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!
[Code]...
View 8 Replies
View Related
Feb 11, 2011
I tried to upgrade Fedora 13 to Fedora 14 using preupgrade. The upgrade seem to go OK, I didn't see any errors. But when it did the final reboot all I get is a blank screen. I rebooted in single user mode and saw that /etc/rc5.d/S99local -> ../rc.local is the last script executed. I edited rc.local and added 'echo "got here"' at the end and rebooted. It did print "got here" so I know all scripts were executed for init 5, it didn't get hung anywhere along the bootup. Why I'm not getting the login screen?
View 1 Replies
View Related
Mar 28, 2010
I just upgraded from 9.10 to 10.04 beta and now I get the login screen - but after logging in, all I get is a blank screen with a black bar on top showing just the time on the top right hand corner. If I CTRL+ALT+F1 and reboot using the command line, it restarts showing mythbuntu on shutdown. Im have nVidia GEForce 8600 - is this due the X crashing? I tried all these - no change
Code:
sudo dpkg --configure -a
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install -f
View 9 Replies
View Related
Jan 29, 2010
So xorg was acting up, and I went into the Hardware Drivers menu to see if the driver had a problem. The driver was disabled, and could not be activated. I downloaded the new ATI driver. I uninstalled the old one, installed the new one, and ran the config step just like it specifies in the install instructions. Upon reboot, I got a blank screen instead of the login screen.I managed to drop back to the command line and uninstall the driver, so now I'm stuck in ubuntu with one monitor instead of 2.
I'm going to attempt to revert to the old ATI driver (which I still have in my home dir), but I wanted to be sure to get this into the forums before I ruined my GUI again.
View 2 Replies
View Related
Mar 21, 2010
Neomagic 256ZX(I think) video card, 256 MB RAM Well, after the upgrade went fine, I rebooted and was greeted by a purple 10.4 screen, after which I was greeted with a blank screen with 6 blinking dots. I don't know if this is a new video driver failure (its a pretty old laptop, theres no need for new drivers) or if its a grub problem. Since I can't get to a grub it goes BIOS>Purple 10.4>nothing and I don't get a terminal login, the laptop is now considered bricked. However I was okay with the install and was wondering if theres a way to fix it.
View 1 Replies
View Related
Dec 4, 2010
I would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Jul 16, 2010
I have just performed an upgrade from OpenSUSE 11.2 to 11.3. My Machine is a Lenovo W701DS laptop which uses an NVIDIA FX3800M graphics card. The system was working fine under 11.2 before the upgrade.
After upgrading to 11.3 the splash screen after GRUB comes up for about 1 second before the screen goes blank. After about 5 mins I am able to SSH to the Laptop and access the system. Doing this I created an xorg file using "X -configure" and copied the new file to the /etc/X11 directory and renamed to xorg.conf.
If I SSH to the laptop change run levels to init 3 then init 5 the Gnome comes up and I have graphics the system works However I am unable to access the text consoles using alt+f1, f2 etc. If I restart the system it is back to the blank screen.
I have attempted to install the NVIDIA drivers however the installation fails due to an error with gcc or kernel source versions. Error log reports that the kernel was complied using a different version of gcc.
View 3 Replies
View Related
Sep 8, 2010
During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!
HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.
View 9 Replies
View Related
Jun 11, 2011
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
View 1 Replies
View Related
Dec 15, 2009
I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
View 1 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Oct 16, 2010
A few of my software sources repositories do not have Maverick distributions. Should I untick them as a software source, change the dist to maverick or leave them at their latest dist?
View 4 Replies
View Related
Sep 1, 2011
i foolishly upgraded 9.1 with some experimental debian stuff there and now the menus are all screwed up. There's not clock, show desktop, notification area and other such applets. The gnome dependencies have been compromised. It says something about the python_gmenu (=2.28.0.1-0ubuntu1) but 3.0.1-1 is already installed.E: Unmet dependencies try using -f.Now I was going to upgrade my distribution to 10.04 seeing as 9.1 is not supported anymore and I wanted to play Quake 1 and was wondering would these problems still exist if I did or have i totally screwed up my ubuntu.I have since taken away the line in /etc/apt/sources.list which caused me to mess this up in the first place.
View 4 Replies
View Related
May 1, 2010
How do I redo a dist-upgrade? Looks like I broke something during upgrade and now I don't want to restart until I forced the upgrade routine to run a second time.
View 2 Replies
View Related
May 6, 2010
--Began with an up-to-date Ubuntu 8.04.3--64 LTS install; tar-copied everything from sda2 to sda3 and booted SDA3 so I wouldn't fry my main install:
[[ ' fdisk -l /dev/sda /dev/sdb '
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x86dae77a
[Code]...
Will attach any logs requested; but I'm about to scrap the failed install and start over, 'cuz I want to test 10.04 LTS and the new Vmware Workstation 7.1--64 beta. The only thing I can think of is that I did not boot into the new kernel ( apt-get upgrade ) before doing the dist-upgrade. I've done a few of these dist-upgrades in the past this way; 6.06-LTS to 8.04, 8.04 to 9.x, etc
View 3 Replies
View Related
Oct 15, 2010
A couple days ago a made a dist-upgrade on ubuntu 10.10, soon after that all my compiz effects were completely disable and i'm not able to get it back on. In the "effects" bar on appearance when i change it to either normal or advance, just says it wasn't able to activate the effects. On compiz-config manager, composite, opengl and gnome compatibility don't activate when selected and doesn't recognize each other (when activate opengl indicates that needs composite active to work, even if it is already active)
View 5 Replies
View Related
