Well been configuring mrtg for a week .. still not getting it done.. looked the search in google but not yet satisfying result came up...
The index maker command for mrtg is not working .... everytime i use this command as:
It shows the error as:
I am trying to get samba going on Fedora 12 ( a virtual machine...).When I use system-config-samba I get a crash when I try to addme as a user...Is there a basic tutorial for getting a samba server properly configured
View 2 Replies View RelatedAfter installatiion, if you find that you can't connect to your box over ssh, you might find that the service has not been started. Start it with the following from a root prompt:
/etc/init.d/sshd startIt will then proceed to create the needed keys forecuring connections and proceed to start the service allowing connections.
I am using F14 installed from DVD, updated to the latest bugfixes for all packages; I also have the nvidia proprietary drivers installed.I have configured my gnome-screensaver using gnome-screensaver-preferences to have a delay of one hour before it blanks the screen. However, no matter the settings I choose (even testing with only a 1 minute delay) the screensaver always kicks in at the 10 minute mark. This persists no matter the graphics driver I use.The only means by which I can stop the screen from locking while watching videos online is to kill the gnome-screensaver daemon.What information should I provide to assist in determining why this is happening? It's very aggravating. I'll include my current xorg.conf in the event that it may help.
View 1 Replies View RelatedThis problem has been there since I upgraded to FC12 from FC11 (I use Gnome). There are two applications that launch automaticaly when I logon:A nautilus window pointed at computer:////RythmBox minimized to notification panel.And they aren't in System/preferences/startup applications
View 6 Replies View RelatedTwo machines:
fedora.local = F14 default
mingisapsycho.local = Mac OS X 10.6.4
I want to be able to ssh/scp between these two machines using:
ssh -l login fedora.local
and
ssh -l login mingisapsycho.local
rather than using IP addresses. Neither of these works, from either of the two machines. This does work between Mac OS machines. And I can ssh if I use IPs. So it seems that by default Avahi is not configured even though it is running? I really don't understand. By "does not work" I mean I get on both machines: ssh: Could not resolve hostname blah.local: Name or service not known
I'm having problems with my route rule in Firewall, I have two links that are working, and set the firewall to use multiple links at once. What has happened is that when i look the IPs of the clients, (its have for default the route to Link 2), they are changing or losing the rule route for link 2 and have in Explorer the Link 1 in any site for show me ip address, then after some seconds back to normal. And the firewall is not configured to do routing load balancing. What can be? Exist some configuration of kernel to accept this configuration ? Like ip route source or anything ?
View 1 Replies View RelatedI am using Centos 5 as squid proxy server. I want to configure MRTG to monitor live visual representation of internet traffic.
View 8 Replies View RelatedI need to connect to upstairs windows-7 machine that is connected to router. I have laptop downstairs running F12 (gnome) with wireless connection.
I need to access my music files on upstairs computer. Do I need samba?, without it so far I am getting an error can not mount the windows machine...
I seem to be missing some step(s) for getting an interface to appear in the output of ifconfig and
iwconfig for a RT2870 wireless USB 802.11n adapter (made by Panda Wifi). Let me step you
through what's I've done thus far.
After plugging the device in, it's low-level identification is as follows (see bold):
root@xps720# lsusb
Bus 002 Device 002: ID 046d:0b06 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
I set up MRTG on my ubuntu 10.10 using this link:[URL]...Now, i am trying to set it up so it refreshes every 5 minutes... I tried program scheduled task be entering /etc/init.d/mrtg start but it does not work... I also added the RunAsDaemon: Yes line to mrtg.cfg file but still nothing. It works fine from the terminal but not from the program...
View 6 Replies View RelatedMy mrtg refreshes usually too late(15 min.)and i want to make it 5 min.But i dont know where to edit.
View 1 Replies View Relatedif there's a way to add additional devices within mrtg? it is setup to monitor my main fw and wanted to add additional fw's in.
View 8 Replies View Relatedrecently i have installed Squid Server and i want to monitor traffic in my lan with mrtg. so i have installed snmp but when i run "snmp -v 1 -c public localhost" i have got "Timeout: no response from localhost". i have turned off the firewall but i get same error.
View 1 Replies View RelatedI try to graph No of open files using simple shell script but it's unsuccessful to draw graph continuously. following are my mrtg.cfg and script. And i am bit unclear with MaxBytes. How we can define this?
[Code]....
I follow the steps to install MRTG ... and this error appear to me
My linux is RHEL 5.0.
I have problem with make mrtg graph.
For example:
I use this Options for CPU:
Code:
Now use this command:
Code:
receive this message:
Code:
Its my third week struggling to install mrtg on freebsd 8.0. I will be happy if someone can provide me with a HOW TO documentation on the issue. i would like to monitor my routers(bandwidth utilisation).
View 1 Replies View RelatedJust installed the LXDE spin of 13 onto my acer aspire netbook. Couldn't make a usb boot stick, finally succeeded with an external card reader and unetbootin. Anyway, GXine isn't working, though it says its configured correctly. I'm very new to fedora and linux in general, played a bit with ubuntu 9.10.
View 4 Replies View Relatedmade software which we can get network traffic Report of of Switches for Daily,monthly and yearly base , in MRTG we can configure as a switch so we can get particular switch Traffic but how can we get each port of traffic of a switch in MRTG
View 1 Replies View RelatedI recently migrated my mail server over to a new machine. For some reason, after verifying that the OIDs are correct, MRTG won't graph anything. I've quadruple checked the OIDs and used the strings as well, it won't graph at all. Graphs for RAM, ethernet, packets, etc. are working. CPU is the only thing not working. They work when I use snmpwalk with them and they do populate values. The logs show unknown SNMP vars for cores 1 & 2, but there's no mention of cores 3 & 4 entries in the logs.
View 3 Replies View RelatedI am on a slackware13.0 machine, that I just finished upgrading to 13.1 with slackpkg.(did slackpkg update;slackpkg upgrade-all; slackpkg install-new. I did not restart the machine). Now im attempting to run the mrtg slackbuild but I get the following during the configure stage:Quote:
...
... [ alot of configure output omitted ]
...
[code]....
I'm trying to get MRTG working on my Debian Lenny server. I have installed all trhe mrtg packages but when I invoke the mrtg command I get this: $ mrtg -c mrtg.cfg Can't locate MRTG_lib.pm in @INC (@INC contains:
[code]...
where is MRTG_lib.pm?? /usr/lib/mrtg is not there?
is anyone familiar with MRTG? i have it up and running just fine, but i have a bunch of interfaces showing up with no data and i want to weed those out. how to specify which interfaces i want to receive and display data from?
View 1 Replies View RelatedI'm using mrtg to generate html files. With mrtg , i use indexmaker . Inside html files , i have found some html tag like "<SMALL>some text</SMALL>".
There is the manner to delete text inside two tags ? With bash script?
i have done most of the setup for MRTG network monitor tool.
But i m stuck at configuration part.
the actual MRTG guide says following.
I m little confused about what should i put inplace of community@router.abc.xyz.
Quote:
The next step is to configure mrtg for monitoring a network device. This is done by creating an mrtg.cfg file which defines what you want to monitor. Luckily, you don't have to dive straight in and start writing your own configuration file all by yourself. Together with mrtg you also got a copy of cfgmaker. This is a script you can point at a router of your choice; it will create a mrtg configuration file for you. You can find the script in the bin subdirectory.
cfgmaker --global 'WorkDir: /home/httpd/mrtg'
--global 'Options[_]: bits,growright'
--output /home/mrtg/cfg/mrtg.cfg
community@router.abc.xyz
This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your webserver. You can read all about cfgmaker in cfgmaker. One area you might want to look at is the possibility of using --ifref=ip to prevent interface renumbering troubles from catching you.
If you want to start rolling your own mrtg configuration files, make sure you read mrtg-reference to learn all about the possible configuration options.
I installed MRTG some hours ago. Everything works fine (disk, cpu,..), except the network graph.
For this graph, it's only work for ~3 cycles (15min), then... nothing.
This is the part of mrtg.cfg:
Code:
The number for eth0 is 3
Code:
SNMP is running:
Code:
Crontab is configured for mrtg (and seems it's not the problem because the other graphs works well):
Code:
In attachement is the graph for the memory (working!) and .. for the network, as you can see, only one small pic at the beginning.
this morning after the latest updates for slackware-current my mrtg-2.15.2 from slackbuilds failed with
Code:
Bareword "P_DETACH" not allowed while "strict subs" in use at /usr/bin/../lib/mrtg2/MRTG_lib.pm line 1133.
Compilation failed in require at /usr/bin/mrtg line 89. BEGIN failed--compilation aborted at /usr/bin/mrtg line 89. As there's currently no newer version for mrtg on slackbuilds, i downloaded mrtg-2.17.0.tar.gz from oetiker's page and compiled it. Changing path in crontab and it works well.
I've been trying to update Fedora 15 for weeks. I always end up with a transaction error and the update stalls. The error reads: GPG keys listed for RPM Fusion for Fedora Rawhide-free repository are installed but they are not correct for this package. Check that the correct key urls are configured for this repository.
This is far too involved for a linux newbie, I think my only option is to reformat and reinstall. This is so frustrating, there are 250 MB of updates available that I can't access.
I am running Redhat linux 8.0 with 2.4.22 kernel. I am using this server for traffic shaping my static ip clients using tc. There are about 250 clients and I am running mrtg to monitor traffic via cronjobs each 5 minutes. When mrtg run I see too much packets loss in my network. What could be the problem in my server?
RAM is 1gb and processor is Intel Pentium D 2.66GHz.