I've got a dual boot machine which all of a sudden stopped working.Whenever I boot up the computer I get the grub prompt and right next to it the underscore symbol _ which keeps flicking but I can't type anything. It just hangs there.
View 7 Replies
I am working on another's Dell Inspiron 530 with Vista 64-bit; see below:
[code]....
wanting a dual-boot, 500GB hdd was formatted as above, Win Vista x64 Recovery CD was created, and antiX-M11 (as Swift Linux 0_1_1) installed. Now, at startup, machine boots to antiX and not Vista. User wants it the other way around. I think I should have reordered the partitions and not installed GRUB in MBR. EasyBCD is the preferred boot loader for User. This is a learning experience but due to time constraints and not being at my home where references are available, EasyBCD is on a USB stick -- should I boot to the Vista Recovery CD and then try to install EasyBCD to sda3 from it, uninstall antiX (but this will not fix the MBR problem, will it?), or edit fstab or what
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies View RelatedMy computer is a dual boot between windows xp and fedora 12. I am using grub and my first boot selection default was windows. My computer has the following specs:
-AMD athlon xp 2400+ at stock speed 2.0Ghz
-640mb of ram, 2x256mb, 1x128mb, all 266mhz speed
-250gb SATA harddrive, seagate
-Nvidia GeForce 4mx AGP video card
-ASUS A7V600 rev. 1.00 motherboard
I booted up fedora 12 today(12/17/2009) and did a fedora software update (task bar->system->administration->software update). It said it found 94 new updates release on (12/16/09), so click update, and the computer did its updates and reboot. Now my grub boot loader is messed up (boot default was windows, now its not) and random apps crash, like gedit, so I can't edit my grub settings to boot to windows and linux is now useless because apps keep crashing. As of right now I am using another computer to post this. I know one of the updates was a Fedora 12 kernel update. And the new updated fedora 12 "automatic bug reporting tool" does not work any more, after the update.
Some ideas I have, but I have no idea how to do them:
-uninstall last updates
-repairand/or restore bad files
This is important because I need to use some of the apps/programs for work.
I had Ubuntu 11.04 and Windows7 installed on my computer. I thought of trying fedora 15 and installed it on a different partition. Now only fedora and Windows boot up. Can I triple boot my system and how? If not, how to get back Ubuntu 11.04 and Windows 7 as before.
View 5 Replies View RelatedI'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
View 2 Replies View RelatedI am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies View RelatedI've tried the instructions here[URL].. But I couldn't get that to work.Anyone know what I can do?
View 9 Replies View RelatedMy old man wanted to try linux, and he got an Ubuntu install (ill check version tomorrow).Anyways, we installed it, but during boot of either it (going though a boot slector menu, hitting F it shows only two lines on the screen (something vaguely similar too):GRUB loading stage1.5GRUB error 21 (or 27 cant quite remeber)
I did, unfortunately, have to step out while it installed leaving him at the helm. now the main problem is this: Ubuntu will not boot, and neither will the previous (contained on a totally different harddrive) Windows XP. A third OS (Vista) still boots, but unfortunately my dad had all his apps on his XP drive. Now, the ubuntu we put on a third Hharddrive (Both Vista and XP boot from two IDE docks in the machine (one Primary master and one secondary master)), but the ubuntu was installed on an enclosed (In the case) SATA drive partition. it seemed to have installed but when selecting to boot form it, or the harddrive with the XP system, i get the above error. however, vista boots completely without problems. Anyone ever seen sometihng like this? the computer responds to no commands beyond ctrl-alt-delete at this lock up, and no dos/command prompt opens up. it just sits there at these two lines until either ctrl=alt=delete or a hard reset are pressed.
I am in a bit of a jam. I had a dual boot backtrack 5 with windows 7, I had no need for the backtrack partition anymore so i deleted the backtrack partition and extended the windows NTFS to take up all free space, now my computer boots to grub but it will not boot into windows. I am currently in the process of creating a ubuntu live cd to do the following to repair the windows Master boot record.
sudo apt-get insall lilo
sudo lilo -m /dev/sda mbr
I have just updated current to get the new kernel and things seem to have gone just a little wrong.After upgrading i edited lilo.conf and ran all seemed fine so i rebooted to find my pc wont boot it cannot find modules and there will be trouble ahead it think it says (will check the error and add it).So i thought no problem i can just boot from an old disk i have laying around and fix it from there. I only had the 12.2 install disk or ubuntu 8.10 live cd neither of witch support ext4 which i stupidly decided to format my drives in.
Anyways i now have a ubuntu 9.10 disk and have booted and try to fix things but am miffed at whats going on. If i chroot into my slack root and look in my /boot there is only the old files before the update, but if i mount the drive in ubuntu there are the new files from after the update.What has happened and how can i fix it? It has just occurred to me i could use a tmp dir and copy the correct /boot files there then in the chroot copy them to /boot may work ?
I have installed Fedora and Windows XP. I want to remove automatic boot on Fedora because it's very annoying. remove that automatic boot or auto boot on Windows XP?
View 2 Replies View RelatedI just did an upgrade from 11.1 to 11.2 and can not boot to OpenSUSE any more. That happened when the first reboot was starting after finishing the upgrade from the DVD. I tried to find the issue and use the repair system with no luck yet. Now I get no gfx for grub
The only thing I managed is to add the windows boot section for windows but I can not seem to boot to opensuse. device.map:
Code:
(hd1)/dev/disk/by-id/ata-ST3160815AS_5RA2LTD0
(hd2)/dev/disk/by-id/ata-ST3160815AS_5RA2LQCJ
(hd0)/dev/disk/by-id/ata-Maxtor_6L160P0_L31AHTVG
device.map.old
[Code]...
I messed up my install so now I can't boot it. I get errors. I doubt I'll be able to fix it. I messed up the upgrade of the kernel images... I'm not sure whether there's something I could do in the Grub config file... I have one other Linux OS I can use in the meantime (plus Windows OS) so I thought maybe boot that up and check the Debian partition in case there's any files I want to save/keep. If I re-install, is Debian Squeeze LXDE still a good choice? I'm going to install something different in the partition where the other Linux OS is. Right now, it's grub is handling the boot loader. The computer is an old laptop, a Thinkpad T41. The HDD is 160GB.
View 3 Replies View RelatedI have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information
rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
I tried a number of times to install dual boot with Win2k. I keep getting errors at the stage of setting up the partition for the install. When I try to choose ext4 it says Fedora cannot be installed on a bootable drive, fix the problem. I don't see how to fix it...it does not say what to do or change.
I have had other linux installed in the same partition without a problem. What gives?
150GB drive for both OS's Separate drive for data, not involved in the install.
| 72GB NTFS Win2K | 76 GB free for ext3 and swap |
LBA support on in Bios.
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
how to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
View 5 Replies View RelatedAfter asking on both this forum and the Fedora forum, I felt it was safe enough to install a copy of Fedora on my working-well openSUSE drive. I have a 1 TB drive, partitioned as follows:
I did an install of Fedora 13, was VERY careful to set up the installer to put it's files in the partitions I wanted, although I did let it mark the partition as active, feeling it may have to boot during the installation process.
I had grub installed in the root of the partition rather than the MBR for both systems.
When Fedora finished installing, I rebooted the system only to find that it wouldn't. I got the dreaded "No Boot Device" message.
So, I started the 5 hour process of booting with the parted magic disk, booting with a Gentoo live disk (only one around), monkeying with the install parts of the openSUSE and Fedora disks, swapping drives to Windows to download openSUSE Live CDs (yes, both) and searching the forums and various other web sites for some poor bloke who did the same stupid whatever it was I did, and finally, as I was using fdisk on the Gnome Live CD, I noticed the warning message stating that fdisk would not work on a drive that was partitioned with the GPD format.
Notice that I have 5 partitions? That is not a typo on my part, I used the GPD format when I set it up so I could do what I did without using "imitation" partitions.
When I used parted (the command line editor on the Gnome Live CD) to change the active partition, everything started working again! Well, at least I can boot the openSUSE system, the most important thing.
It is my suspicion that the Fedora install uses fdisk to do it's work, and fdisk just mucks up a GPD formatted disk. Not the information, just the part of the drive that holds the partition table. Perhaps just the flags section. I don't know enough to say with any certainty.
I didn't change the drives parameters during the installation of Fedora, so I don't know of it even offers the GPD partitioning option. If not, I can understand how this sort of thing could happen.
Still....So now all I have to do is make the grub menu, the one installed with openSUSE, boot the Fedora installation on the next partition. Seems simple enough.
I've been wrestling with this for the last couple of days - I can't dual boot XP and F10.
[code]...
I did notice when installing F10 that it remapped my drives, making the WIndows and therefore boot drive /dev/sdb and the Linux Drive /dev/sda. I know this requires changing some of the drive designations (hd0,0 etc) but I've done it twice and ended up only being able to boot into Windows.
I installed Fed 11 after Win 7 was already installed---on my Lenovo T-60 laptop. So I rebooted after a couple of software updates with no option to boot to Win 7. my laptop boots straight to Fed 11. So I was checking grub.conf and it is "x'ed" out. so is menu.lst. I click on them and the message says "grub.conf" is not available. Whats up with that? or is there another place to get to the MBR to give me an option between the 2?
View 7 Replies View RelatedFedora 12 during boot, it shows both option as "Fedora" and "Others". I have windows xp instance installed, which is not coming after selecting "Others".
View 2 Replies View RelatedI installed fedora on my hard drive and would like to add windows 7 to it as dual boot. do i put the windows cd and just boot and install ? is that it? by the way, im doing updates and what is this? [URL]
View 3 Replies View RelatedI am attempting to install both F14 Live and F14x86_64 Live to a laptop. I have a liveUSB for each.
I want to divide a 60GB in half, using 30GB for each.
The issue that I am having is whichever I install first uses the full drive.
For example, if I boot the F14LiveUSB then"install to hard drive", it creates a volume group for the whole drive even though I have changed the size of the / and /home partitions to total about 30GB. Also, that there is about 30GB of free space in the volume group.
Then when I boot the F14x86_64 Live and "install to hard drive" using , selecting "Use Free Space", a message is displayed saying "could not find enough fres space for automatic partitioning, please chose another partition method."
I tried selecting "shrink current system" but it wants to shring the LiveUSB instead of the volume group on the HDD in the laptop.
i have been trying too dual boot fedora 13 and ubuntu 10.10. i have already had ubuntu 10.10 installed and i put the fedora 13 live cd in and shrank my ubuntu volume to create two different partitions. after everything installed i could only boot into fedora. no grub menu would come up.
View 3 Replies View Relatedi have windows 7 installed in one of my 1TB HDD1. i have a 260 GB HDD2 i deleted all the partition and tried to install fedora 13 x86_64 in it . installation went well . during installation it did not ask me for boot loader (grub) and when the pc restarted it ended in Grub rescue>what should i do or should i have to reinstall it or any other way to work
View 8 Replies View Related
