Fedora :: Dual Boot With F14 And F14x86_64?
Dec 1, 2010
I am attempting to install both F14 Live and F14x86_64 Live to a laptop. I have a liveUSB for each.
I want to divide a 60GB in half, using 30GB for each.
The issue that I am having is whichever I install first uses the full drive.
For example, if I boot the F14LiveUSB then"install to hard drive", it creates a volume group for the whole drive even though I have changed the size of the / and /home partitions to total about 30GB. Also, that there is about 30GB of free space in the volume group.
Then when I boot the F14x86_64 Live and "install to hard drive" using , selecting "Use Free Space", a message is displayed saying "could not find enough fres space for automatic partitioning, please chose another partition method."
I tried selecting "shrink current system" but it wants to shring the LiveUSB instead of the volume group on the HDD in the laptop.
View 3 Replies
ADVERTISEMENT
May 17, 2009
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
View 2 Replies
View Related
Mar 4, 2010
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
View 3 Replies
View Related
Jan 10, 2010
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
View 7 Replies
View Related
Sep 7, 2009
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies
View Related
Jul 9, 2010
I have installed Fedora and Windows XP. I want to remove automatic boot on Fedora because it's very annoying. remove that automatic boot or auto boot on Windows XP?
View 2 Replies
View Related
Sep 4, 2011
I have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information
rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
View 8 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Jul 28, 2009
I tried a number of times to install dual boot with Win2k. I keep getting errors at the stage of setting up the partition for the install. When I try to choose ext4 it says Fedora cannot be installed on a bootable drive, fix the problem. I don't see how to fix it...it does not say what to do or change.
I have had other linux installed in the same partition without a problem. What gives?
150GB drive for both OS's Separate drive for data, not involved in the install.
| 72GB NTFS Win2K | 76 GB free for ext3 and swap |
LBA support on in Bios.
View 14 Replies
View Related
Sep 4, 2010
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
View 4 Replies
View Related
Nov 18, 2010
how to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
View 5 Replies
View Related
Aug 2, 2010
After asking on both this forum and the Fedora forum, I felt it was safe enough to install a copy of Fedora on my working-well openSUSE drive. I have a 1 TB drive, partitioned as follows:
I did an install of Fedora 13, was VERY careful to set up the installer to put it's files in the partitions I wanted, although I did let it mark the partition as active, feeling it may have to boot during the installation process.
I had grub installed in the root of the partition rather than the MBR for both systems.
When Fedora finished installing, I rebooted the system only to find that it wouldn't. I got the dreaded "No Boot Device" message.
So, I started the 5 hour process of booting with the parted magic disk, booting with a Gentoo live disk (only one around), monkeying with the install parts of the openSUSE and Fedora disks, swapping drives to Windows to download openSUSE Live CDs (yes, both) and searching the forums and various other web sites for some poor bloke who did the same stupid whatever it was I did, and finally, as I was using fdisk on the Gnome Live CD, I noticed the warning message stating that fdisk would not work on a drive that was partitioned with the GPD format.
Notice that I have 5 partitions? That is not a typo on my part, I used the GPD format when I set it up so I could do what I did without using "imitation" partitions.
When I used parted (the command line editor on the Gnome Live CD) to change the active partition, everything started working again! Well, at least I can boot the openSUSE system, the most important thing.
It is my suspicion that the Fedora install uses fdisk to do it's work, and fdisk just mucks up a GPD formatted disk. Not the information, just the part of the drive that holds the partition table. Perhaps just the flags section. I don't know enough to say with any certainty.
I didn't change the drives parameters during the installation of Fedora, so I don't know of it even offers the GPD partitioning option. If not, I can understand how this sort of thing could happen.
Still....So now all I have to do is make the grub menu, the one installed with openSUSE, boot the Fedora installation on the next partition. Seems simple enough.
View 4 Replies
View Related
Feb 6, 2009
I've been wrestling with this for the last couple of days - I can't dual boot XP and F10.
[code]...
I did notice when installing F10 that it remapped my drives, making the WIndows and therefore boot drive /dev/sdb and the Linux Drive /dev/sda. I know this requires changing some of the drive designations (hd0,0 etc) but I've done it twice and ended up only being able to boot into Windows.
View 4 Replies
View Related
Oct 17, 2009
I installed Fed 11 after Win 7 was already installed---on my Lenovo T-60 laptop. So I rebooted after a couple of software updates with no option to boot to Win 7. my laptop boots straight to Fed 11. So I was checking grub.conf and it is "x'ed" out. so is menu.lst. I click on them and the message says "grub.conf" is not available. Whats up with that? or is there another place to get to the MBR to give me an option between the 2?
View 7 Replies
View Related
Jan 5, 2010
Fedora 12 during boot, it shows both option as "Fedora" and "Others". I have windows xp instance installed, which is not coming after selecting "Others".
View 2 Replies
View Related
Aug 23, 2010
I installed fedora on my hard drive and would like to add windows 7 to it as dual boot. do i put the windows cd and just boot and install ? is that it? by the way, im doing updates and what is this? [URL]
View 3 Replies
View Related
Dec 29, 2010
i have been trying too dual boot fedora 13 and ubuntu 10.10. i have already had ubuntu 10.10 installed and i put the fedora 13 live cd in and shrank my ubuntu volume to create two different partitions. after everything installed i could only boot into fedora. no grub menu would come up.
View 3 Replies
View Related
Jun 2, 2010
I've got a dual boot machine which all of a sudden stopped working.Whenever I boot up the computer I get the grub prompt and right next to it the underscore symbol _ which keeps flicking but I can't type anything. It just hangs there.
View 7 Replies
View Related
Jun 29, 2010
i have windows 7 installed in one of my 1TB HDD1. i have a 260 GB HDD2 i deleted all the partition and tried to install fedora 13 x86_64 in it . installation went well . during installation it did not ask me for boot loader (grub) and when the pc restarted it ended in Grub rescue>what should i do or should i have to reinstall it or any other way to work
View 8 Replies
View Related
Jul 15, 2010
I have a Dell Dimension 3000, pretty boring. I've got 3 hard drives installed. One drive (C) has XP loaded onto it, one drive has Fedora 13, and one drive has all of my media and photography work on it.
I installed Fedora to play around with Linux, but now after a while, I've decided that I want to use it as my default OS. I haven't booted into Windows in who knows how long. The problem is, that when I boot the computer, it defaults to XP. The only way to get into Fedora is to press F12 at the proper time to select which drive I want to boot from. This is a hassle at times, because I have a tendency to forget and not hit F12 quick enough and have to start over.
Unfortunately, I'm not sure which bootloader I'm using, however I believe it is the XP boot.ini file, if I'm explaining this right. I tried modifying the boot.ini file in XP, but it seems as though the instructions I got are only when the two OS' are on the same drive in different partitions.
Want to make linux default OS in a dual boot system on 2 seperate hard drives
View 7 Replies
View Related
Nov 8, 2010
I install Fedora 14 32bits the same way I install Ubuntu. First, make unallocated space for it (about 150Gb). During the installation setup, I select "use all continuous free pace" as partition option, coz it's fastest and easiest. /dev/sda/ is selected as location for boot loader, and leaves Fedora as default boot target. Installation process goes very smoothly, but when the system restarts. The computer boots up as if Fedora has never been installed, it goes straight to Windows7, No GRUB boot loader menu whatsoever.
troubleshooting attempt #1: at first I thought it maybe the GRUB compatibility issue between 32bits Fedora and 64bits Win7. So I tried out 64bits Fedora, doesn't work.troubleshooting attempt #2: then I tried to install the boot loader on the Linux partition (first boot sector of boot partition) and let Windows 7 controls the startup menu by using FreeBCD.
View 6 Replies
View Related
Jan 8, 2009
I'm having trouble getting my computer to dual boot between vista and fedora 10. I 'know' that both are installed, but only 1 will boot at any given time. for instance, i've been using fedora 10 for a few months now, but only this os will boot from the grub menu. to boot vista, i need its install dvd, where I choose the command prompt, and then 'bootrec /fixBoot', 'bootrec /fixMbr'. After this, Vista will boot fine, with all of my data files untouched, but now Vista is the only option that works.
To get back to Fedora, I need its installation dvd, where I go through the motions, and choose to update an installation. Again, now Fedora is the only os that works. I would like to have them both just work, but all I can do is a 'faux' install with the dvd of whichever one I want.
View 8 Replies
View Related
Aug 13, 2009
I am an amatuer with linux(fedora 11) and was trying to install it on my laptop which has vista installed on it. I have already allocated 120 GB to the vista partition(NTFS file system) and left 27GB of unpartitioned space on the drive. I tried installing fedora 11 the first time and my vista was absolutely corrupted. I was wondering if someone could guide me with the selections I have to make while partitioning the drive using the fedora installer DVD.
View 14 Replies
View Related
Dec 26, 2009
I know how to do a dual boot. I have done it many many times. But 1 I always installed Windows first so I would not have any problems with Fedora grub, and 2 the computers I did dual boots on were ones that I didn't really care if something went wrong on. But I want to do a dual boot on my laptop which I do care if something goes wrong on. I have all my stuff backed up so its ok if I something goes wrong and I have to reinstall. But I would rather not have to set everything up on my laptop again. So my question is what is the best way to do a dual boot with Windows Vista (the one that came with my laptop) and Fedora 12. I already have Fedora 12 on my laptop. I need to do these things:
1. Make my Fedora 12 partition smaller to make room for Windows Vista.
2. Install Windows Vista without Windows Vista Grub messing up my Fedora 12 grub.
I understand that I am doing this at my own risk so please dont not respond. Like I said I have all my data backed up so I can reinstall if I need to. I would rather not but its doable.
View 2 Replies
View Related
Jun 28, 2010
I have a PC with two seperate hard drives. One has WinXP running on it, and on the other drive I've installed Fedora 13 from a live CD downloaded from the fedora website. How do I get the system to allow me a choice of which OS I want to start on boot-up.
View 1 Replies
View Related
Mar 11, 2011
I looked for threads about this but didn't find them. If they are out the and I could be pointed to them it would much appreciated. I'm in the midst of building a new system and it will be a dual boot system with Windows 7 and Fedora. There will be two separate hard drives for each OS.
Currently I have a dual boot Win XP and Fedora system with a hard drive dedicated to each OS. The nice thing with this is that I found here on these forums a change to one of the Windows files that allows Windows to recognize that there are two different operating systems without having to spend the money for something like partitioning software. It was a simple one line change to an ini file, I think. Can this be done with Windows 7? If I'm not clear on what I'm asking let me know. It's been a while since I last did this so I'm a little fuzzy on it all.
View 2 Replies
View Related
Feb 11, 2009
I need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
View 14 Replies
View Related
Feb 14, 2009
I have two hard drives in my PC, ubuntu 8.10 on the first. After reading good reviews about Fedora 10, i decided to give it a try. I installed Fedora 10 in my second hard drive and the distro is great. But my problem is that now I cannot get into the Ubuntu install. I changed the /boot/grub/menu.lst file as recommended by several posts, but no progress. my menu.lst file below. if I have got it wrong or if I need to add anything.
HTML Code:
View 2 Replies
View Related
Apr 26, 2009
I'm looking to dive right into this whole GNU/Linux thing, and am looking to try out as many distros as I can. I've already installed Ubuntu Jaunty Jackalope, and want to dual boot fedora 10 with it. How hard would this be for a total linux n00b like myself?
View 14 Replies
View Related
May 6, 2009
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
View 4 Replies
View Related
