Programming :: Installdirs Site" Options In Cpan Configuration?
Oct 30, 2010What is "--installdirs site" options in cpan configuration?
View 1 Replies
ADVERTISEMENT
Ubuntu Servers :: Warning: No Success On Command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
Dec 7, 2010I am trying to insall CPAN, apparently I do this by typing CPAN at the command line.After much else, this results in
Code:
**UNRECOVERABLE ERROR**
Could not find gdlib-config in the search path. Please install libgd 2.0.28 or higher.
If you want to try to compile anyway, please rerun this script with the option --ignore_missing_gd.
Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
[code]....
Ubuntu :: Perl Modules Using CPAN - Get The Message From CPAN That This Module Is Already Up To Date?
Jun 7, 2010I tried to use CPAN to install a module Algorithm::Loops using "install Algorithm::Loops". I get the message from CPAN that this module is already up to date.But, when I try to use it I get the message:
Can't locate Algorithm/Loops.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at ./test.pl line 4.
BEGIN failed--compilation aborted at ./test.pl line 4.
And indeed, the file Loops.pm is nowhere to be found.Isn't that a contradiction?
Programming :: Module In Cpan For Creating A Blog?
Apr 2, 2010Exist it a module in cpan for creating a blog?
View 4 Replies View RelatedProgramming :: CPAN Cannot Install Math - Pari Module
Jun 8, 2010I wrote a perl script to feed information to our load balancer:
Code:
#!/usr/bin/perl
#
use strict;
#use warnings;
#
#
use Net::SSH::Perl;
my $user="bluethundr";
my $pass="secret";
my $dir="$ENV{HOME}/data";
open (LBVSERVERS), '<', "$dir/lb-vserver" or die "Couldn't open file: $!";
open (CSVSERVERS), '<', "$dir/cs-vserver" or die "Couldn't open file: $!";
my $ssh = Net::SSH::Perl->new("10.50.0.1");
$ssh->login("$user", "$pass");
print " .....
I need to be able to install the Math::Pari CPAN module in order to accomodate the Net::SSH CPAN module. The prereqs are installed:
Code:
cpan> install Net::FTP
Net::FTP is up to date.
cpan> install LWP::UserAgent
LWP::UserAgent is up to date.
But when I either try to install or force install Math::Pari this is what I get:
Code:
cpan> install Math::Pari
Running install for module Math::Pari
Running make for I/IL/ILYAZ/modules/Math-Pari-2.01080604.tar.gz
Checksum for /home/bluethundr/.cpan/sources/authors/id/I/IL/ILYAZ/modules/Math-Pari-2.01080604.tar.gz ok
Math-Pari-2.01080604/ .....
CPAN.pm: Going to build I/IL/ILYAZ/modules/Math-Pari-2.01080604.tar.gz
Did not find GP/PARI build directory around.
Do you want to me to fetch GP/PARI automatically?
(If you do not, you will need to fetch it manually, and/or direct me to the directory with GP/PARI source via the command-line option paridir=/dir)
Make sure you have a large scrollback buffer to see the messages, or 'tee' the STDOUT/STDERR to a file.
Fetch? (y/n, press Enter) y
Getting GP/PARI from ftp://megrez.math.u-bordeaux.fr/pub/pari/unix/
Cannot list (Failed to establish connection.
): at utils/Math/PariBuild.pm line 319, <STDIN> line 1.
Can't fetch file with Net::FTP, now trying with LWP::UserAgent...
You do not have LWP::UserAgent and/or HTML::LinkExtor installed, cannot download, exiting...
Programming :: Site For Learning Programming Language?
May 28, 2010tell me some sites for learning programing language Because i feel confusing for learning C programing language now I got so many questions by my studing and i want to solve them by myself too.
View 14 Replies View RelatedGeneral :: Cgi Doesn't Work With New Apache Site Configuration
Mar 24, 2010I installed apache on my local machine to test websites. I have one problem: I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.) Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/site1/public_html
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
[Code]...
Debian Configuration :: Web Site Stops Working / Have To Reset Networking
Nov 9, 2010I'm running Debian server 5.0.6 and the latest stable version of Apache. I am hosting a website and it will stop responding after an unknown amount of time. In order to make the website work again I have to run /etc/init.d/networking restart. The server is running a static IP address and is not resetting when the website goes down. I don't know where to start looking.
View 4 Replies View RelatedUbuntu Servers :: Cgi Doesn't Work With New Apache Site Configuration?
Mar 24, 2010I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
[code]....
Software :: Multiple Site Installation/Configuration Not Working On WordPress 3.0?
Oct 8, 2010I'm running WordPress 3.0 with apache2 on ubuntu 9.10. I'm trying to setup the Multiple Site feature for multiple Blogs, but can't seem to get past the enable network message. Does anyone know why the Enabling network message on the Network screen will not go away? It seems to be stuck even though I log off an back on again into the WordPress3.0 admin screen.
View 2 Replies View RelatedGeneral :: PHP Installation And Configuration Options
Feb 26, 2010What are the standard, common PHP extensions that should be enabled when configuring a new php installation? I need ldap so I know I should include that, but what do most LAMP servers configure with their PHP installs?
View 2 Replies View RelatedServer :: Configuration Options Repositories Developers Use?
Aug 23, 2010I am trying to build minimal php and mysql binaries. While doing so, I realize that there is no documentaries to state whether does compiling straight from the source without any configurations options set, ensure an optimized yet minimal build? I am trying out for my own personal website which will be powered by Wordpress 3. The previous method I used was using the package manager: "apt-get install php-cgi php5-cgi php5-cli php5-mysql mysqld mysql-server mysql mysql-client". I am trying out to mimic the binaries installed by the package manager through building from the sources instead. How do I know what configuration options did those repositories developers used? Is there any special configuration options used for those minimal yet optimized binaries? Does doing the following ensure a minimal build?:
1) ./configure
2) make
3) install
I figured since I did not use any configuration options, therefore it should be a minimal build right (Meaning the bare-bones)?
Debian Configuration :: Mount Options Of Root Partition
Apr 28, 2016I made a mistake in Gnome Disk utility tool. Instead of changing the options for a USB key, I changed the options of the root partition.
In Initial state, automatic options were desactivated. I just activated them. And after desactivacting them, I realized my mistake and switched back to "non automatic options".
By doing this, I suppose that defaults values were used since now, the system starts in command line mode and no more in graphic interface mode.
When I try the "startx" command, I get a "read-only" error.
With the command "sudo mount -o rw,remount /" the graphic interface is started.
Below is the configuration of the partition under the gnome disk utility tool :
"Mount at startup" is checked
"Show in user inteface" and "Require additional authorization to mount" are unchecked
Mount options : nosuid,nodev,nofail,x-gvfs-show
Mount point : /mnt/eb11d4d6-75db-XXXx-XXXx
Identify as : /dev/disk/by-uuid/eb11d4d6-75db-XXXx-XXXx
Filesystem type : auto
I do not want to change anything that could leat to a critical error. So what do you think I should do ?
Debian Configuration :: Properly Pass The Options To A Module?
Oct 26, 2010I'm running Testing and need to pass some parameters to my bttv tv tunner card, for this reason I created the following file /etc/modprobe.d/kozumi.conf with this content:
alias char-major-81 videodev
alias char-major-81-0 bttv
options pll=1 radio=1 bttv_verbose=1 card=151 tuner=38 gbuffers=4
The problem is that for some reason this options aren't properly set after booting the computer, I've tried different combinations for line 1 and 2 without success.
I'm used to rmmod the bttv driver and modprobe manually with those settings but I'd like to automate the process.
Server :: Smartd Configuration Options - Monitoring And Logging
Jun 28, 2011I'm having some trouble understanding the smartd configuration options which go in /etc/smartd.conf. I've had smartd running for close to a year now, and read the manual page for smartd and smartd.conf several times, and I still can't get my head around it properly. This is what I use in smartd.conf:
/dev/sda -H -f -S on -o on -n standby,q
-s (O/../.././(00|06|12|18)|S/../.././11|L/../../(3|6)/21)
-m <nomailer> -M exec /usr/sbin/smartd_mailer
The above works fine (I use a custom script because I use exim). However, I had two failing hard-disks on two different machines (sector pending attribute) - but I would only receive warning emails if I restarted the machines - not when the periodic tests were being performed. I have a number of questions, if any of you would like to share some light on this:
1. It is not clear from the manual page how the monitoring and alerting mode works. Do I get an initial email when I start smartd if something is wrong, and then no other warning email after each scan, even if there is a fault, unless the fault goes worse?
2. Can I force it to send me warning emails after each test (offline, online, short, long etc.) if the fault condition is still there, even if it hasn't gotten worse?
3. There seem to be a variety of parameters monitored. I was thinking that if I monitor bad sectors, and the hdd temperature - it should be enough to warn me when the hard-disk is failing? Would the -a switch in smartd.conf cover these?
4. I don't understand the difference between monitoring and logging in relation to alerts? Do I get alerts only if I log things?
5. Do I understand correctly that the -p and -u switch would warn me of *any* changes in SMART attributes, even if they don't represent risk of failure?
6. Is there a way of finding out if the scheduled tests (offline, long, short etc.) have been performed?
Slackware :: Add Any Special Options To Mkinitrd For AHCI Configuration?
Apr 29, 2011Do I need to add any special options to mkinitrd for AHCI configuration?
mkinitrd -c -k 2.6.37.6-smp -m ext4
Does it know I'm not in legacy PATA mode or do I have to add something to load AHCI module with it?
Programming :: How To Run Site / Programmed In C / C++ On Server?
Aug 13, 2010How can I run the site, programmed in C /C++ on Linux server?
View 2 Replies View RelatedUbuntu :: Where To Change X Configuration Options In Natty Without Xorg.conf
May 24, 2011I need to add an option to my xorg.conf to enable "backing store", like this:
Section "Device"
Identifier "Miserable Old SVGA"
Driver "miserable"
Option"BackingStore""True"
EndSection
But I don't have an xorg.conf file in Natty. There are several conf files in /usr/share/X11/xorg.conf.d/, but I'm not sure which one to add it too (I can't find the Device section in any of them). I guess I don't even know if the "BackingStore" option is valid in the latext Xserver.
CentOS 5 :: Default Configuration Options For Upgrading And Recompiling Apache?
Oct 23, 2009I'm currently upgrading my clients' CentOS 5 installation to use httpd-2.2.14 as we need it for the server to past some of the Hardware checks used in the PCI [Payment Card Industry] security test. I was basically wondering if anyone had the standard CentOS 'configure options' for building httpd/Apache so I could copy them to ensure it is a straight replacement for my existing 2.2.3?
[Code]...
OpenSUSE Install :: 11.3 Startup Options - System Hanging On The Automatic Configuration
Aug 22, 2010I had some issues with my system hanging on the automatic configuration of the install so I searched the web for the issue. After reading this thread: Hangs at end of SuSe 11 install I used acpi=off apm=off nolapci as the install options and it worked. My question is, do I need to add those options to the /grub/menu.lst or will the install do that?
View 9 Replies View RelatedUbuntu Servers :: Openvpn Site-to-Site : Impossibile To Ping Client On Subnet?
Jun 25, 2010I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
Networking :: Enabling Full Routing Site To Site With Openvpn Not Using Masquerading?
Jul 27, 2010I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
View 3 Replies View RelatedProgramming :: What Language Would You Write A Social Networking Site In?
Jan 8, 2010I'm a full-time developer in my day-job, I get paid real money for it and everything! Nowadays I generally write web-based business apps using VB.net and ASPX.net, but I'v recently been asked to come up with a social networking type site (something in-between Facebook and twitter) that will initially be used for training purposes... don't ask or I'll have to send the men in the dodgie overcoats round
Problem is, it is to be written like real social-networking site, I've no idea what I'm going to make it look like and was, more fundamentally, wondering what to write it in?I've written commercial systems using Perl, PHP, ASP and the .net (VB and C) stuff.
Networking :: Site To Site Vpn Racoon With Cisco Asa 5505 Routing?
Mar 25, 2010I have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
Programming :: Really Good Web Site For Learning HTML CSS Java Script
Jul 25, 2010Maybe I am posting something completely obvious and unnecessary here, but this is the best web site ever I found as reference for web programming.What makes this web site so special is that om almost all pages which explain some aspects of the language, a button "Try it yourself" takes you to a screen with two panes. In one pane the example is written, the other pane shows the output on a web page. In the first window you can actually change the code snippet, and see the result immediately in the pane on the other side. That is a great way to study why certain things occur as they do.
View 1 Replies View RelatedSecurity :: Site-to-site Ouija Board Connection?
Oct 3, 2010Maybe a site-to-site Ouija board connection.
View 5 Replies View RelatedProgramming :: Linking Options For Python?
Dec 11, 2010I am trying to build an application that must link with python so as to load a python module during runtime.I have this makefile :
Code:
[alex@iskandhar src]$ cat Makefile
CFLAGS = -Wall -O3 -I ../../../SPOOLES.2.2 -DARCH="Linux" -DSPOOLES -DARPACK
[code]....
Programming :: Use Multiple Options At The Same Time?
Dec 4, 2010I want to be able to use multiple options at the same time and some of those options will require an argument and some will not.
Here is my bash script:
#!/bin/bash
while getopts ":a:bc:de:fg:" opt ; do
case $opt in
a)
[Code]....
If I only use option -a with no arguments, the script works...
Programming :: Ubunutu 10.04: Eclipse Has No Run Options?
Jul 9, 2010I'm trying to compile and run a java application on Ubuntu 10.04. In the run drop down there are no run options in "run as". I have PDE installed but for some reason its still does not work.
View 1 Replies View RelatedGeneral :: Can't Locate CPAN.pm In @INC - Error
Feb 22, 2010I am executing command "yum install perl-CPAN". I got the following error "Can't locate CPAN.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .).". Let me give you some details of the problem.
OS: CentOS release 5.4 (Final)
Architecture: : 32 Bit
Installed Perl Version: This is perl, v5.8.8 built for i386-linux-thread-multi
I've also studies previous posts on this topic which says "yum install perl-CPAN" will fix the problem when I execute this command I got "No package perl-CPAN available".