Programming :: Bash Script: Passing Values From Script To A C++ Executable?
Mar 4, 2011
I've been searching the forums and google in an attempt to find an answer. I'm completely new to scripting and just want to get one or two up and running but I'm having problems with my current script. I want the script to:read my inputs run a loop in certain steps
within the loop execute a program with output to another file enter the values into the program (Problem area)
Quote:
#!/bin/bash
echo "Enter the Lower value, followed by [ENTER]"
read L
echo "Enter the number of steps you want to take, followed by [ENTER]:"
read s
[code]....
Running the program from the shell asks for 3 variables, which in my script are i, tt and adstep. I understand conceptually why it won't work. It won't move onto the next line in the loop until the previous task is completed (which doesn't even start without the 3 inputs!)
I have a file with around 1000 IP addresses in it and I need to be able to ssh into each one of them, run a single command, and then exit. I already know the ssh command I want to run and it looks like this:
(I know shpass is not good to use and keys are the correct way but I don't have any other options in this scenario.) if these ip addresses were in a .csv file, by themselves with no other information, how would I create a script to do the above command to each ip until the end of the file?
An input filename ($1) is fed into mediainfo, which by the use of grep and cut spits out a single number which is the aspect ratio. This is then divided by bc into 320, which gives the desired height dimension for the file that I want ffmpeg to create for me. Finally, ffmpeg runs using the calculated dimensions... Basically, it's the passing of the $ASPECT variable to bc that seems to fail. It looks like bc won't read the output from the mediainfo line... It always crashes out with:
Code:
(standard_in) 1: illegal character: ^M I've tried doing something even simpler like this to debug by just trying it to display the calculation on the screen:
I have a bash script called bash I am trying to execute from PHP. I think I have that right (not sure yet). Ideally let me explain what I am doing. The front end will pass a variable from a text entry box, called New_Task, the New_Task needs to be executed in the bash script and the output needs to be displayed back on the front end. So let me give some code and let me know what you all think.bash code is quite long, but essentially it is made to take a entry and create a task out of it. eg. "svn branch <Task Name>". The code below is getting the New_Task variable passed from the text entry box ($NewTask) and I have an exec for the bash script, but I am not sure it is working, I need to add some code to see the input in the front end.PHP back end code:PHP Code:
function mTaskCreator() { $strAction = $this->_objUserContext->mGetPostVar( 'acti
I get no print to stdout on screen from the C code.Does bash somehow block or mask it?I get print from bash. I get this error in the non-test bash script like: let "rdval = $rdstr"syntax error: operand expected (error token is " ")The let command prints rdval= but I presume this is due to the printf test statements getting in the way.I am getting no compile errors. Why does the C code not print the values specified?
I am not sure if that Subject really explains it, basically I have a script that executes a CLI java-applet that requires a passphrase from the user. I can easily execute this by issuing the -p argument followed by the passphrase however that shows up on possible logs or at least on the results of the ' ps ' command. If you do not supply this -p argument it provides a new line with the echo " Enter Passphrase: " and asks for input.
how can I provide a result/input for the Passphrase request and is it still possible to throw this application in the background with the ' & ' following the command? I have seen a few examples that show a /bin/expect that expects a result and sends a command however I would like to refrain from any extra dependencies. Example of Regular Execution of application:
I'm trying to implement an assert function similar to:[url]
However, I'm having trouble with file existence testing when the file name has a space in it.
I have distilled the problem down to the following:
This code works as expected, printing 'yes' if '~/test file' exists, and no if not.
Code:
However, this code gives an error.
Code:
The error:
Code:
Which tells me that it is splitting ["~/test file"] into ["~/test] and [file"]. Why? Is there a way around this?
Note that if you simply use a file path without a space, both cases work perfectly. Is this a BASH bug possibly? I just can't understand why the first would work, but the second wouldn't.
Code: #!/bin/bash echo -n "Please insert your name: " read NAME
[Code]....
It works fine, but is it possible to have default values using bash read(1b)? I mean if user is prompter for sex, he just pushes ENTER and by default 'm' is chosen. Or if user is prompted for hometown and he doesn't insert anything, but just pushes ENTER button, 'New-York' sis chosen by default Are such default values possible in bash?
is there any way I can pass commands to the CLI of a tool directly?
I would like to script some actions, for example:
./OpenBTS < "tmsis"
I do not need to retrieve the results (I watch it in the log file). how I could realize that? There is now way to do this using command line parameters, at least not that I found out. So it looks like I have to figure out sth myself. Maybe I could automate screen in a way to detect the prompt and "paste" my command there. Are there tools for this on Linux?
It seems incrontab wont see spaces properly at all. I setup a script to echo the arguments passed to it by incrontab to a file, and no matter what I put around the arguments on the incrontab file it will count a space as the next argument.
I have written a script to automatically retrieve imdb artwork for a given filename. Here is the script:
Code:
You can ignore all the commented "echo" commands that was just me testing. Anyway, the script work fine, however I am trying to use incrontab to monitor a folder, when a new (video) file is moved into the folder, it should execute the script and retrieve the artwork. My problem is, when incrontab passes the $# argument to my script, the script wont work because the spaces aren't escaped.
Here is some more detail:
Incrontab
Code:
Code:
The problem is, the script GetArtwork, doesn't see "Bangcock Dangerous" it just sees "Bangcock"
I have tried putting quotes around the $# in the incrontab - this just makes the script see "Bangcock (notice the single quote character)
I wrote a simple bash script to let me treat any set of programs like a deamon. For example if I configure the script a certain way I can start/stop/get the status of apache, mysql and php all from one command. I am having a bit of a problem though. I am passing commands as strings to a function and then depending on the arguments to the script it might run one of these commands or another. Some of these commands need to beun in the background though, such as deluge-web. When I send "deluge-web &" to the function and it execute it deluge-web does not start in the background. I can't figure out why this is. I have tried escaping the & with ''s and with a , but nothing seems to work. I know that this is some idiotic thing that I am overlooking, but I am a bit stumped. Here is the script configured to start/stop/get status of deluged and deluge-web.
I'm trying to get multiple numeric valued version information into a variable, all on the same line. I want for example $VERSION=3.1.0.01.002. I'm trying to pull seperate values from the file named version.properties, wherein the file contains;
I end up with the value of .002 ?? Seems like it's only getting the last portion because if I run the script thru "bash -x" I get: ... + VERSION=$'3 .1 .0 .01 .002 ' + echo $'3 .1 .0 .01 .002 ' .002
I have to read a couple of numbers from a random.txt file. In this .txt file there are random numbers. They are separated by a space. Example if you opened test.txt:
test.txt :1 6 1 3 6 8 10 2 4
I would like to read those numbers using CAT and store them into an array:
numlen=${#num[*]} - (must be like this because it is a part of a larger program)
I'm at the bottom of the bash learning curve, looking up, hoping someone can toss me a line. I need to update tracker on my system but this will erase the metatag database I've been building up over the course of months for the purpose of indexing a news archive. So the solution seems to be, 1) save the output of tracker-tag to a text file for all relevant files within a directory, 2) upgrade tracker (since the version in the Ubuntu repositories is very much out of date) and then 3) use a script to parse the text file and pass appropriate arguments back to tracker-tag to rebuild the database. It sounds as though it ought to be simple enough, but I need a push in the right direction, which hopefully will not be off the cliff. Before I confuse my metaphors any further, here's what the text file looks like.
SO I'm not talking about changing the file permissions, The only thing I could find on google was this [URL]Basically can you convert your bash script into a executable file, One that you can't open in text editor?
you can make a file that runs the contents as if typed out by the user in command prompt by saving the file as either .bat or .cmd . When using BASH in ubuntu, is it possible to save terminal executable files (from a text editor, like GEDIT), What file ending does it take, can i lay it out with just commands? (what is the syntax)
I've been trying to write a bash script called runSorter.sh that runs an executable that also takes in some parameters and outputs the results to a text file. The executable, sorter, takes in a number parameter. I want to make it so that you can input as many number parameters into runSorter.sh as you want and it will run the sorter executable for each one. So far, what I have looks like this:
#!/bin/bash args=("$@") INDEX=0 if [ -z args ]; then echo "Error" else while [ $# -gt $INDEX ]; do NUM=${args[$INDEX]} echo $NUM echo ./sorter $NUM let INDEX=INDEX+1 done fi
My problem is that when I run ./run-sorter.sh 100 on my terminal, it just prints this to the screen: ./sorter 100 How can I have so that it properly executes sorter and outputs everything to a text file?
I downloaded a program called tonespace http://www.mucoder.net/en/tonespace/ which I extracted and then tried to execute the executable file with ./tonespace. This gives me the following message:
bash: ./tonespace: No such file or directory
When I use the command: file ./tonespace I get this: tonespace: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, stripped
I dont get it. The file is clearly there, yet when trying to execute it bash doesn't seem to recognize it.
It has permissions rwxr-xr-x and is not owned by root. Am I overlooking something?
I'm struggling with the issue of passing a vector of a class to itself, here's what state its in now... (tried many variations, but without direction).
I'm trying to work out the best way to achieve the following.
1)php page that grabs data from a local database. (not a problem)
2)It then needs to send this data to a c program/service running on a remote server. (I probably need it to be able to handle 4+ million reocrds in an array)
3) The c service then needs to process the data and send it back to the initial php script that called it. i was hoping this could be in a an array like structure of some kind. 4)update the db with the results.
I was thinking of using gsoap to write a simple c soap service that php can communicate with. Would this be the right way of doing this or would something like sockets in php be a better way of sending this volume of data as an array or struct to linux c socket if thats even possible.
i am having two small issues with a function i have made.sorry if it is a mess, i am still learning bash.the first is calling the nonpersistssh function (second line) and assigning the return value to nonpersistdiag.the function returns 1, but nonpersistdiag seems to only contain 0. i am unsure on how to proceed.the second problem is the nested else clause on line 10. it is a syntactical error. how would i declare it correctly?
Code: function endsession(){ nonpersistdiag=$[nonpersistssh]# a function that returns an exit code sudo /etc/init.d/ssh stop; sshdiag=$?
i'm programming a small tcp client, but i need that the server knows the source ip. My client receives a external connection and forwards, but the ip seen by the server, of course, is the client ip. I would like, change this ip to original source ip.
I don't know how to do this. I tried with the connect and select function.
and lang.php has a link to page2.html, how do I pass on the value of the lang parameter from lang.php to page2.html? The value needed is the one passed in to lang.php.
