I'm struggling with the issue of passing a vector of a class to itself, here's what state its in now... (tried many variations, but without direction).
Code:
#include <iostream>
#include <string>
[code]...
the compiler (g++ 4.4.5) does not recognize PRE as a type in the following code:
Code:
enum mode {PRE, IN, POST};
class tree
[code]...
im trying to build a simple program for my C programming class, this is the source code
#include <stdio.h>
int main()
{
int length, width, length, height, area, perimeter;
perimeter = width + length + height;
area = width * length + heigth;
[Code]...
i dont see any error (you might)but every time i run it it runs but after it asks me to input for the width i do it but it doesn't take me to the length, it just stays blank until i input another value in the same place for the width, it asks me for 4 inputs in total i don;t know why, and after i run it different times it gives me different values for the perimeter and are. how can I fix this?
I have a problem with compiling vdrift-2009-06-15 using scons. As the source that i obtained only supports scons i cannot use make. the error that i get when i try to compile it in GNOME Terminal is: scons: Reading SConscript files ... scons: warning: The Options class is deprecated; use the Variables class instead.
File "/home/mohit/Download/vdrift-2009-06-15/SConstruct", line 9, in <module>
scons: warning: The BoolOption() function is deprecated; use the BoolVariable() function instead.
File "/home/mohit/Download/vdrift-2009-06-15/SConstruct", line 13, in <module>
Checking for C++ header file asio.hpp... (cached) yes
Checking for C++ header file boost/bind.hpp... (cached) yes
Checking for C++ header file GL/gl.h... (cached) yes
Checking for C++ header file GL/glu.h... (cached) yes
Checking for C++ header file SDL/SDL.h... (cached) yes
[Code]........
I'm trying to work out the best way to achieve the following.
1)php page that grabs data from a local database. (not a problem)
2)It then needs to send this data to a c program/service running on a remote server. (I probably need it to be able to handle 4+ million reocrds in an array)
3) The c service then needs to process the data and send it back to the initial php script that called it. i was hoping this could be in a an array like structure of some kind. 4)update the db with the results.
I was thinking of using gsoap to write a simple c soap service that php can communicate with. Would this be the right way of doing this or would something like sockets in php be a better way of sending this volume of data as an array or struct to linux c socket if thats even possible.
I am trying to make a periodic boundary condition type function, using an existing class given to me in lecture notes, but am having some trouble! Effectively, I am trying to make an array such that, for a point in any row of a 2D matrix ("Matrix(i,j)"), the command "next_i[i]" will return "(i+1)%L", where L is the number of data points in the row. This will enable me to select a point to the right of any point in the matrix: "Matrix(next[i],j)"
[Code]....
Is is possible to use a class inside a struct? I keep getting segmentation fault with this code:
Code:
struct my_struct {
unsigned count;
std::string msg;
[code]....
My new guy has created several functioning webpages on his machine with TOMCAT 6 with Sun JDK, yet our machines use TOMCAT 5.5 with Open JDK, which his webpages don't show. Do you have any idea how to make them work? The error showing in a browser:
Code:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception org.apache.jasper.JasperException: Unable to compile class for JSP:
[Code]...
I've had to do some code in java, a language I'm very much unfamiliarly with so please excuse my incorrect use of terms. The basic outline of my problem is I create a class object as a local within a swing button function it works fine. If I create it as a global ( with I think I need to do ) within main, then prototype it with the other swing objects at the bottom of the file when it is called it causes a host of problems. I think the easiest way is to show it.
View 2 Replies View RelatedOkay so I'm working on a program here as I'm learning java,I have an array that is initialized with 5 objects that are hard coded. I have made a GUI that takes the input needed and creates an object with those values.I need to add that object to the ArrayList that I have previously made.Okay, so I have three classes, guiclass.java, main.java and gladiator.java Objects are made and defined in "gladiator".Main contains my public static void main section, launches my gui, creates my five hard coded objects, creates my ArrayList and adds my five hard coded objects to the ArrayList.Now, I need to add the object that I generated in the guiSection [action Listener]to the ArrayList that I created in my main class's public static void main string... section. Problem is my arraylist "cannot be resolved" from guiclass.
View 13 Replies View RelatedI am looking to write a function to return an MD5 hash in Java but I don't want to us the MessageDigest class as I am using the J2ME framework which doesn't include it.
View 3 Replies View RelatedHow can I handle the situation below so that the "Fatal Error" message is not shown. It would be ideal if I could supply a default class to be used. I'd prefer to not use: ini_set() to supress the errors but actually be able to "handle" the error.
Code:
<?php
class MyClass
[code]....
I have a application in C++, and now I have two class. MyDialog is the class that main function launch. In MyDialog class there are four elements and when I click over theese elements, there is a MousePressEvent that launch other class, Touchpad class. So, in some moments, I have loaded two class. My question is, how can pass a value from Touchpad class to MyDialog class, when I close (destroy) Touchpad class. In a few words, is it possible to communicate values between class?
View 5 Replies View Relatedi need to implement a Set class(like in stl) using a vector.Here is my code that doesnt work corectly:
Code:
#include <iostream>
#include <vector>
template<class T>
class Set
{
[Code]....
i'm programming a small tcp client, but i need that the server knows the source ip. My client receives a external connection and forwards, but the ip seen by the server, of course, is the client ip. I would like, change this ip to original source ip.
I don't know how to do this. I tried with the connect and select function.
I have a file with around 1000 IP addresses in it and I need to be able to ssh into each one of them, run a single command, and then exit. I already know the ssh command I want to run and it looks like this:
Code:
shpass -p [password] ssh -p 10022 -o StrictHostKeyChecking=no root@[ip variable] 'reboot'
(I know shpass is not good to use and keys are the correct way but I don't have any other options in this scenario.) if these ip addresses were in a .csv file, by themselves with no other information, how would I create a script to do the above command to each ip until the end of the file?
If I have the following links in HTML
Code:
<a href=lang.php?lang=cymraeg>Cymraeg</a>
<a href=lang.php?lang=english>English</a>
and lang.php has a link to page2.html, how do I pass on the value of the lang parameter from lang.php to page2.html? The value needed is the one passed in to lang.php.
Below I've presented the declaration, definition and the calling method of a function w.r.t pass by reference:
Declaration
Code:
void getUnpackedMsg (unsigned char &data, unsigned int numberOfBits);
Definition
line 278: Shown in RED
Code:
void packedMessage :: getUnpackedMsg (unsigned char &emptyArray, unsigned int numberOfBits)
{
...
...
printf ("
[code].....
I cannot for the life of me get this little (simple) script I wrote to work. Here is the entire script:
Code:
#!/bin/bash
ASPECT=`mediainfo $1 |grep "Display aspect ratio" |cut -d : -f 2`
HEIGHT=`echo "320 / $ASPECT" |bc`
SIZE=`echo 320x$HEIGHT`
[code]......
An input filename ($1) is fed into mediainfo, which by the use of grep and cut spits out a single number which is the aspect ratio. This is then divided by bc into 320, which gives the desired height dimension for the file that I want ffmpeg to create for me. Finally, ffmpeg runs using the calculated dimensions... Basically, it's the passing of the $ASPECT variable to bc that seems to fail. It looks like bc won't read the output from the mediainfo line... It always crashes out with:
Code:
(standard_in) 1: illegal character: ^M I've tried doing something even simpler like this to debug by just trying it to display the calculation on the screen:
Code:
#!/bin/bash
ASPECT=`mediainfo $1 |grep "Display aspect ratio" |cut -d : -f 2`
HEIGHT=`echo "320 / $ASPECT" |bc`
echo $HEIGHT
and it does the same, so it's definitely bc that won't accept the output from mediainfo.
I was trying to make a code for passing variables by reference..here's the code:
#include<iostream>
using namespace std;
void fun(int& ,int& );
int main(){
[Code].....
invalid initialization of non-const reference of type 'int&' from a temporary of type 'int*'
I have to launch a new thread from my existing main program and pass data to it.
For now the data is simply a string value.
How I go about passing data to a new thread while it is running.
I have the following snippet HTML code:
Quote:
<table id="profile">
<tr>...............</tr>
<tr>
<td width="40%">
[Code].....
How can pass values in args[0] and args[1] to Perl/CGI script?
How can I implement c_str() for a string class?
View 2 Replies View RelatedIs it not possible to declare a vector inside a C++ class ? Have a look at the following code:
Code:
#include <stdio.h>
#include <iostream>
#include <malloc.h> // malloc
#include <strings.h> // bzero
[code]....
This is a really specific question, but maybe someone can help. I'm debugging someone else's code, and they call a UDPWriter and specify an IP address and port, and I'm trying to make sure this multicast traffic goes over a certain port. How can I determine which port the UDP defaults to and change it?
It's confusing to me because I'm not familiar with all the layers the OS sends traffic through before it goes through the interface. Is there maybe some simpler way to tell the OS to send multicast traffic over both interfaces?
i'm a bit stuck playing with the following class setup for glut. The actual issue is with the function pointers.Basically the following code is the opengl redbook cube example slightly modified.
View 2 Replies View RelatedI'm writing a binary search tree class to insert records and I'm stuck on the following error:
Code:
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../lib64/crt1.o: In function `_start':
(.text+0x20): undefined reference to `main'
collect2: ld returned 1 exit status
Here is the code for my class:
[Code]...
I really don't know how to approach this, I thought that everything was working fine but I have no idea what is wrong. Also, for clarification, main() is in a different .cpp file that #includes "tree.h"
I have a JApplet class I have copied to both a windows and a linux server. When I open up a webpage with the applet in it in my browser from both servers (http://server1/....) I can only get it to work from the Windows server. The Java console on my PC pops up complaining it cannot find the class file on the Linux server. Has anyone experienced anything like this before and how have you solved the problem?
View 1 Replies View RelatedI'm trying to teach myself python (from Learn Python the hardway e-book) but am struggling to grasp the concepts of Classes etc. Part of exercise 43 is to rewrite the game / create a new game with classes for each room etc. So I'll show you my code so far and explain at the bottom my problem
Code:
#ex43a.py
from sys import exit
[code]....
I found out how to save an object using Serializable in JAVA, the standard however how can I set up my MainVariableList to have a function/method saveobject so it saves the object within it's own class, the below code compiles, however when I run it reports an error on startup but works, basically what do I use for the red line, how do I tell it what object is passed to the class?
View 1 Replies View Related