I would like to install opensuse 11.2 on my children's new pc with nvidia 7025 graphic onboard card. which desktop environment is better between kde or gnome? I haven't a preference yet but I wolud like to install a light graphic system that can be used by a child of 5 yo.
View 9 RepliesI installed Gnome desktop environment recently then ;I' ve lost KDE desktop effects settings. I just can see Compiz Configirator. I cant configure effects independently. There is same settings in gnome and kde. And also I cant change windows appearence.
View 4 Replies View RelatedI'm sure there is something I have done wrong. I have installed GNOME, but on start up it doesnt give me the option to select it. How can I use GNOME?
View 9 Replies View RelatedI have a question about switching between desktop environments like kde and gnome. I'm using ubuntu 10.04 with gnome 2.x and with a really cool theme I found and mixed. I would like to check kde desktop because I kinda like the appearance of it. I have also cairo dock and compiz configured for my needs. my question is whether I can switch to kde desktop without losing my customized gnome environment if I decide to switch back to gnome? (I know that to switch session you need to log out but that's not the point) the next question is how can I install kde without losing the customized gnome theme I have ?( if the answer for the first question is negative)
the final question is whether I lose data when I switch desktop and if do than what specifically.
Is the new Ubuntu still running with Gnome as the desktop environment? I seem to remember hearing somewhere that it was something else - does that mean I could uninstall Gnome?
View 5 Replies View RelatedI've just rented a dedicated server from [URL]
Its a clean install of Ubuntu 10.04 and I want to be able to use gnome desktop environment and connect to it with NX Client from my windows 7.
I have done the basics..
update
upgrade
sudo apt-get install ubuntu-desktop
sudo apt-get install gnome-desktop-environment
I have done this installations a couple of times before and everytime it's been working for me.
I emailed their support about it as well.
They told me it should work by just doing these first steps, but since it didn't they asked to take a look at it. So they did.
I got this mail back from them:
It seemed that your server is missing some packages/services.
Therefore, I need to ask you first if you acknowledge the ability of being charged with the additional support fee of 37,25 Euro per 15 minutes support?
I will never pay more for 15 minutes of support then I payed for the server thats for sure..
i use ubuntu 11.04. why my taskbar lost. border windows also lost. why? how to get back my desktop environment?
View 1 Replies View RelatedI want of learn what are gnome-sessions, how are they managed, windows managers etc. I also want to learn how display turns from textual (u know, black background and white text) to complete graphical screen during startup.
View 1 Replies View RelatedI try to install GNOME Desktop Environment with that command yum groupupdate "GNOME Desktop Environment".
View 3 Replies View RelatedI am using ubuntu 10.04, I want to know if I can change to kde 3.5 and remove gnome desktop environment.
View 1 Replies View RelatedI am trying to install "GNOME Desktop Environment" on my server. i used the following command: yum groupinstall "GNOME Desktop Environment" I got it from this tutorial: [URL].. Now when i started the installation on my centOS 5 server. i got the following error please see this image: [URL].. Now i wanted to know how can i fix that issue.
View 10 Replies View RelatedWhat desktop environment should i install to develop Gnome apps? As i cna see ,the required tools are
Anjuta - 3.0
Devhelp - 3.0
Glade - 3.10
and most of these versions are not available for ubuntu. Tell me what DE to have in order to do that!
I install ubuntu server 11.04 I select ubuntu server from boot menu then enter username and password and then i see a command line line and a black background How i can setup a graphical app (some thing like genome) for my server I do not know any thing Any body can explain all step of this for me how I connect to internet how download graphical app and install it? (I connect to web with windows 7 and adsl internet)
View 6 Replies View RelatedI've installed and used SUSE 11.2 with KDE environment. In generally, I've completely satisfied with it. However I want to change KDE into Gnome without re-install SUSE.
View 1 Replies View RelatedHow do you change the GDM theme? Also how do I switch desktop environment. I installed both kde and gnome with the installer but at the login screen there is no sessions button
View 9 Replies View RelatedI am using openSUSE 11.4 with two different desktop environments(gnome and kde).is this good?
View 4 Replies View RelatedI have a problem with my server. When i try to "apt-get install gnome-desktop-environment" it comes out with a failure. When i try to apt-get -f install it comes out with this
ks365539:~# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I heard that it is possibly because I have Lilo on my server, instead of grub. How do I make the desktop-base work?
I have openSUSE 11.2 installed with KDE4 and what is the proper way to install another desktop/window manager. Installing fluxbox is straight forward with zypper install fluxbox what about gnome and lxde? How will the default application be affected e.g. when I login into KDE, video is defaulted to smplayer If gnome/lxde is installed will the default app change with the desktop environment or will one app be defaulted to all desktop environment?
View 1 Replies View Relatedon an old Dell Latitude 110L laptop is have installed OpenSuse 11.3, using the LXDE desktop. It's amazing how fast it is. I have tried Gnome on it, KDE and also XFCE but I really must say LXDE wins big time.I do have one question though: how can I share folders so it is possible to have this desktop in my home network and share files between the computers?
View 2 Replies View RelatedI have a laptop that is a little bit older, and OpenSUSE was running pretty heavy on it with the KDE and Gnome desktops (I installed Gnome, tried it for bit, then wiped it and did a clean install with KDE).
Since it was so sluggish on that laptop, I grabbed a couple live CD's of OpenSUSE with the LXDE and XFCE desktop environments. The XFCE disc doesn't seem to boot at all, which I tried in a couple different computers, and on Virtualbox with the same result.
LXDE worked fine and I installed it just fine, with hopes of switching over to XFCE later, as I like it better. This brings me to my question, can someone tell me what the easiest way is to switch from the LXDE desktop to XFCE?
I found a page in the OpenSUSE site that appears to be dedicated to XFCE, here is the link:
Xfce - openSUSE
I went there, I clicked on 11.3 on the right hand side, and then clicked on the 1-click install option for X11fce, the first option. It opens the YaST software manager and I followed the prompts, and it finished. All of the packages were installed, except XDM.
I was expecting that the software would install and configure the desktop, and I'd reboot to see an XFCE login. This was not the case.
what the correct, and safe way would be to switch desktops?
Does OpenSuSE have any base64 file converters? I've just heard that Ubuntu has one built in. I'm asking because I have some old archived emails (from Mozilla Mail) and some of the emails have attachments. I've been told a way to convert the jpg and gif images but I also need some pdf's and doc's and ms excel documents to convert too. I run SuSE 11.2 and I use KDE as my desktop environment.
View 9 Replies View RelatedI there a way to check which desktop environment installed on a machine using only commands in a shell
View 5 Replies View Relateda server at work has been accessed through the desktop environment as root. I know this is a risk and since I have never done it before I was wondering if there are any files created by the desktop that could compromise the system and how could I clean it up.
View 2 Replies View RelatedI'm using opensuse 11.2 GNOME. While going through the Add/Remove Software I found that I've some KDE libraries installed on my system. I don't think that I need them on my system. Will removing them affect my system in any way?
1)Smolt KDE notifier.
2) PIM storage service library
3) PIM storage service
4)KDE Base libraries
5)KDE core libraries
6)KDE PIM libraries
After upgrading the distribution from 10.1 to 11.3 I was not able to start the GNome-Desktop. The first error message I received was "maximum number of x display failures reached". I figured out that there was a problem with the ATI Display driver. I guess I fixed this one now, since I do get a Login-Screen.
But after login, I only have a completely empty Desktop (no Icons, no Taskbar, etc.). Also Keyboard-Shortcuts don't work. I tried it with different user-logins, but always the same result. Then I found information regarding gconftool-2 and the recursive -unset switch. Tried this one for /apps/panel and /apps/nautilus. But still no Desktop. Below is some information from .xsession-errors, which I don't know how to resolve.
[Code]....
I want to make Gnome desktop look like on KDE, to be more precisely if its possible to make a desktop/home folder like in KDE???
I'm using OpenSUSE 11.3 32bit
I have updated Opensuse 11.3 to 11.4. I have also updated to the latest NVIDIA drivers. Now, when Gnome desktop starts it freezes: it draws all the shortcuts on the desktop but I cannot use my wired mouse to click anything as if the desktop has freezed. The cursor shows that something is loading. I cannot also use Ctl + F2 to start xterm... But I can use Ctl + Alt + F12, so the keyboard is working.
View 5 Replies View RelatedI'm wondering how to reset the gnome desktop.i.e. the task bar and everything is molested, etc. etc.I've seen some posts with a shell command for this, however would you thinkits resettable to default via the gui in gnome?
View 3 Replies View Relatedopensuse v11.2 The Gnome help describes how to install fonts: copy the font files to </usr/share/fonts>. I have some Type1 fonts with PFB, PFM, AFM and sometimes INF face files. The only ones I see in the <Type1> directory are AFM and PFA. Which font files does Gnome actually require? Is a PFA needed? Are the font files moved/deleted from </usr/share/fonts/> after installation? Is there a more obvious way to install fonts in Gnome?
View 3 Replies View RelatedWhat I try is to execute Linux programs from Windows. What I do:
- I run an X Sever in Windows (Xmin).
- I connect to Linux server using putty.
- Stablish DISPLAY to Windows X Server.
- Run Linux application.
Really, what I do for simplifying the work is create, in a shared folder, Windows direct access to do this work. Ex: I create a link called "tora - Run Oracle Administration Tool.lnk".
When users want to run Tora in Windows, they don't have to install it. Just press the link and it runs a .cmd which does the previous operations. So users can run konsole, LibreOffice, tora, ... and all Linux programs as if they where installed in Windows Clients. And as the Linux and Windows computers are joined to Active Directory, each users access has its own configuration for each program.
Thus, they can try this programs without having to install them.
So as I can run all Linux programs... Why not allowing to run a remote desktop (I know I can do it with Vnc, Xrdp, NX, ...) If user run "konsole", a Linux konsole is open in Windows client. And then he can open X programs (I don't create links for all Linux programs, so the can run the konsole link and run any program). After displaying konsole, if I type "konqueror", konqueror is opened in Windows client.
If type kdesktop, desktop of kde is open, but the menu bar, tool bar doesn't appear...
Here is an image: [URL]
I detail it:
- My client is a Windows 7.
- Open a konsole in a remote linux (titled shell-konsole)
- Run kdesktop command.
- A new window titled "KDE Desktop" is opened.
But no menu or application bar is opened. An it doesn't takes my configuration (my configuration is Spanish).
How can I add menu and application bar to that desktop?