As part of the troubleshooting process for my web application, I was told to find out through PHPinfo if PHP is running in CGI mode. I have my phpinfo page up, but I'm not sure what I should be looking for.
I'm running opensuse 11.4
I have a web application that I am trying to upgrade. Part of their upgrade process involves using a migration tool to transfer data from one version to another. This tool relies on cronjobs for it to function.According to them, the migration is not working because my cronjobs are not working properly.Is there a way to verify this?Below is what I had to paste in my crontab:MAILTO=webmaster@mymailhost.com* * * * * cd /srv/www/whiterhino/d7/periodic; /usr/bin/php -q cron.php
View 6 Replies View RelatedIs there a program available which will check and verify a downloaded file. Ubuntu has gtkhash and Mandriva uses Parano. I know how to Md5 using the command line, but gui software would be a bonus.
View 4 Replies View RelatedI played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
Below is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
I have been trying to figure out some way of installing Squeeze with some assurance that the new installation won't be pwned from Day One--- and so far I have had no success. Even worse, I have been having some strange problems using SSL in my existing Lenny installation which has been further hampering my efforts. And which may be consistent with the hypothesis that I am in fact being subjected to an on-going MITM attack when I try to install Squeeze over the net. This possibility has encouraged me to keep trying to take reasonable steps to ensure that key binaries in my forthcoming Squeeze have not been tampered with by the time I finish the initial installation. I am seeking steps that can be taken by an average user willing to follow directions written by an expert user.
I found a very interesting recent Debian Security mailing list thread which articulates some of the same concerns that I tried to express several weeks ago. The scenarios which concern Naja Melan and myself (and ???) should not simply be dismissed as too implausible to be worth trying to prevent. I think Melan's thread is rather prescient in view of "Comodogate":http://arstechnica.com/security/news/20 ... estion.ars https://www.eff.org/deeplinks/2011/03/i ... lent-https http://www.wired.com/threatlevel/2011/0 ... ompromise/ http://www.theregister.co.uk/2011/03/23 ... forgeries/ http://blogs.comodo.com/it-security/dat ... ompromise/ http://www.techeye.net/security/firefox ... rtificatesOne of the fake certs acquired by the bad guys would have enabled them to mount a MITM attack on anyone trying to install updates to Iceweasel/Firefox add-ons via addons.mozilla.org, which I think certainly suggests that the alleged state actor intended to tamper with at least some software.
(EDIT: important new developments in that story:http://erratasec.blogspot.com/2011/03/c ... festo.html http://www.thetechherald.com/article.ph ... y-attacker http://www.theregister.co.uk/2011/03/28 ... aks_cover/ http://arstechnica.com/security/news/20 ... o-hack.arsBriefly, an anon who claims to be Iranian and who claims to have acted alone, and who suggests that he has some connection with political dissidents inside Iran, has claimed to have been the Comodo affiliate cracker. At least one pentester finds the claim plausible. It woudl explain several aspects of the breach which did not appear consistent with Comodo's conclusion that the breach was sponsored by the Iranian government.)
I have a large file that I copied. (very large).What is the best way to verify the copy is an exact match?md5sum or is there better?
View 1 Replies View RelatedMint 8 (Ubuntu 9.10, Karmic Koala), FF 3.5.8 with noscript, betterprivacy, ghostery, torbutton Complete newbie regarding wireshark or netactview but I was advised to try one of these to determine if a Firefox add-on was using Tor.
View 6 Replies View RelatedI'm having trouble understanding how to verify the download of the Fedora iso-files. know how to do this on a Windows system. I have been looking in the help section for checking the iso-files, but I'm not sure where to find the right hashes, like MD5, SHA1, and etc.
View 6 Replies View RelatedI am trying to get openssl to verify a certificate. I will walk you through what I have done so far.
1. openssl genrsa -des3 -out connect.mydomain.com.key 2048
2. openssl req -new -key connect.mydomain.com.key -out connect.mydomain.com.csr
3. Bought an SSL from GoDaddy.
4. Submitted my CSR
5. Downloaded sf_bundle.crt (CA File I presume)
6. Downloaded connect.mydomain.com.crt
Now I can do the following: [root@server tls]# openssl verify -CAfile sf_bundle.crt connect.mydomain.com.crt
connect.mydomain.com.crt: OK This is specifying the CAfile.
[Code]...
I have an OCZ Vertex SSD...the 30GB variety. recently I upgraded my kernel to 2.6.33. I have read that that is all that is needed in order for trim to just start working. Is there a way that I can verify that TRIM is working?I'm debating getting the Vertex2 100GB model because I love my SSD now, but would love to have a little more storage space. I just don't want to buy it without TRIM working.
View 4 Replies View RelatedI want to verify the root password. I am using rPath linux and my use case is like this: 1. There is screen in my application through which user can change the root user's password. He provides 2 information in the screen
i. existing password
ii. new password
2. I use a shell script in the back end that uses the "passwd" command to do it. And it doesn't ask for the existing password. But, my business use case is if user enters wrong existing password, I should not reset the password and throw some error message. How do I verify the existing root user's password? And also keep in mind that I am already in that linux box (logged in as root). Also let me now if there is any smarter way of doing it other than "passwd" command.
If I send data via scp, will scp automatically verify that the received data matches the sent data? I can do it manually with md5sum, but is that necessary?
View 3 Replies View RelatedHow to verify that Cronjobs schuled for the user has run or not ?
View 1 Replies View RelatedLets say I have a site "Website1.com"
On that site I want to run a little javascript that verifies that the site was accessed as "Website1.com" and not "dev-Website1.com"
If it was accessed correctly, nothing happens. If it was accessed incorrectly, it displays an error saying "You are trying to access this site incorrectly."
What is the simplest way to accomplish this?
All of the discussion about slackware and kde prompted me to rsync alien's kde 4.6 packages (thanks for these by the way!).Each directory contains the .txz packages and associated .asc (all same signature)and md5s.I want to avoid doing gpg --verify whatever.asc individually for multiple files. Likewise for md5sum -c whatever.md5.Can anyone tell me a nice way of running run gpg --verify and md5sum on all files in the directory? I have been playing with wildcards but can't get it right.
View 8 Replies View RelatedHow do I verify that my 6 GB/s SATA ports are working under Linux?
Linux detects the ports, and I can use them for disks but I would like to figure out if they are using a 6 GB/s controller/driver instead of the slower, more common speed.
I am in the process of cloning a HD. Before I wipe the original drive I was wondering if there was a tool to create something like a md5 hash of the entire drive to verify that I have an exact copy. It does not necessarily have to be an md5 hash and any command line BASH options would work for me as well.
View 1 Replies View RelatedI am experiencing some strange behaviour with sound, and I have been messing around with installing some ALSA drivers. I suspect that I might have corrupted some part of the installed Ubuntu packages. Is there a way to check all the packages on the system for integrity using apt-get or similar?
View 2 Replies View RelatedI am not able to find any information to verify a downloaded .iso file for security and integrity at [URL]../download/ubuntu/download .Are they supplied elsewhere?
View 1 Replies View RelatedI have enabled IP Forwarding in my linux machine by using the commandsysctl -w net.ipv4.ip_forward=1. But I dont see any difference in routes when I type the route command before and after changing this value.Do you guys have any solution to verify the packet forwarding, but using this single linux machine only? Of course, I verified the net.ipv4.ip_forward=1 value. But I need to verify by transmitting orreceiving packets
View 3 Replies View RelatedI am testing about using SSL Certificate in apache web server using Ubantu 10.04.2 (64 bit edition). And I insert SSLcertificate and private.key file into "default-ssl" file in "sites-available" folder. But when I call the website, SSL certificate show "Could not verify this certificate for unknown reason".
Configuration in "default-ssl" is shown below
SSLCertificateFile /etc/apache2/ssl/mysite_com.cer
SSLCertificateKeyFile /etc/apache2/ssl/privatekey.key
SSLCACertificateFile /etc/apache2/ssl/SCAONE.cer
SSLCACertificateFile /etc/apache2/ssl/ROOTCA.cer
I've got an asp page (I can't edit) which I can access with a test user I've setup, however when I try to access to same page via curl, I get the following error:
Code:
<h1> You are not authorized to view this page </h1>
The URL you attempted to reach has an ISAPI or CGI application installed that verifies user credentials before proceeding. This application cannot verify your credentials. There's lots of other text (doubt it's relevant though).
Here's the one liner I'm using:
Code:
curl -A "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" -u myusername:mypassword [URL]
I've done some searching but cant find anything which doesn't suggest rewriting the asp...
How to verify that Debian is running at 100 Mbps or 1000 Mbps? I can view the report from 'ifconfig eth0' but I can't see how fast the link has been established.
View 2 Replies View RelatedI just downloaded the "Fedora-11-i686-Live-KDE.iso" and "Fedora-11-i686-Live.iso". I want to check if the downloaded files correct or not. I can use a tool to get the md5 sum of the downloaded files. But I want to compare them with the original ones.
View 6 Replies View RelatedI back up all my digital photos to a couple of places. I've been using the cp command, but--given the personal value--have started to wonder if there's a more reliable way. I'm no stranger to Linux, Bash, Perl, etc., so I could write something to copy and compare md5 hashes, but I was wondering if something already exists (reinvention, wheels and what-not).
Most of my googling for copy and (verify|valid|check|hash|confirm) turns up rsync. However, as far as I can tell, rsync only uses hashes to see if a file needs to be updated. It doesn't perform a hash comparison afterward. For this use, specifically, the files are binary and typically 8-10MB.
I used 7z to create a multi-volume 7z archive file with 0 compression rate. with this command:
Code:
7z a -t7z -v1g -mx0 /home/movies/documents.7z /home/documents
a stands for add
t stands for type definition
7z stands for 7z archive type
[Code].....
I am running Ubuntu 9.10 KK (UNR) on my Netbook and I use the Huawei E5830 as UMTS modem. I can connect to the E5830 through WiFo (no problem at all) and USB. How can I verify whether the E5830 is recognized as modem when connecting it to USB? It changes the mode from USB storage device to USB modem, however I think I can not access it as a modem.
View 9 Replies View RelatedI'm looking for a small terminal tool to verify a burned disc and compare it to an iso file.
I googled for verify burned disc/dvd - no mateches.
There is a thread, which tells how to do it in k3Burn - but I need it on terminal to use it with ssh.
I know the who belongs to the IP address that created the file. (is there any way to verify what IP address created what file?) My concern is that it did not come from the address specified. I found this in /tmp/udp.pl.
[code]...