Debian Hardware :: Ethernet Device Appears And Disappears
Mar 12, 2010
Brand new Acer laptop | Intel chipset
Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
During this week, I installed Debian twice on this system using NetInst, connected trough ethernet. Yesterday, I noticed the ethernet controller wasn't listed by lspci. I restarted, it appeared but didn't work. I turned off the system, started it a bit later and the device worked normally. This odd behavior has happened during the last twenty four hours. The ethernet controller appears and disappears. I enabled the "Boot from LAN" BIOS option to check the availability of the device right upon start and I'd say there's a 50% chance that it doesn't appear. I posted this message connected through the ethernet device.
I guess I should return the laptop because of this problem but I know very little about hardware and I wanted to ask first.
View 5 Replies
ADVERTISEMENT
Mar 18, 2011
I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:
[Code].....
I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?
View 9 Replies
View Related
Sep 6, 2011
When i click on "installation / Live Gnome CD" a screen appears then it disappears fast and i get a black screen
- I checked my ISO Hash & it should work without problems
- I tried several CDs / ISO " KDE/Gnome "
*-*-*-*-*-*-*
MS-7366 (version 1.0)
Processor : intel(R) Celeron(r) D CPU 3.06GHz
Memory : 3 GiB
Graphic Card : nVidia 8400 GS , 1 GiB
View 8 Replies
View Related
Jun 20, 2011
I have used the information available at wiki.debian.org/iwlagn to install firmware etc for my Intel Pro Wireless 4965 card.According to the network applet the connection is good, but it only seems to work when my ethernet cable is plugged in.I get no connection without the cable in, even though clicking on "edit connections" showshat ethernet is shown as "device not managed".With the cable plugged in I can get emails. Iceweasel will connect to the internet, but Epiphany will not.Without the cable I get no internet connection at all
View 9 Replies
View Related
Nov 23, 2010
I'm using a large xfs partition on a large raid volume using 7 1TB drives. I am currently getting a "no space left on device" error message when creating files or directories. However I see the following output when checking space limitations.
df -h
[root@system]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hdd3 18G 775M 16G 5% /
/dev/hdd1 99M 15M 80M 15% /boot
[Code].....
View 4 Replies
View Related
Oct 20, 2009
My USB sound card used to work perfectly, but after i unplugged it, there seems to be a problem. When it is unplugged it is in the multimedia device preference list, but it is greyed out. When i plug the sound card in, nothing happens to the greyed entry, instead a new device shows up with the same name.
When press test on the new entry, it works fine, but it's like pulseaudio dosn't recognize the USB sound card, and the sound just comes out of the internal speakers. Also, if i move the new entry up in the list, it has none effect at all. Sound still comes out of the internal speaker. Does anyone know how i can fix this?
View 1 Replies
View Related
Jan 6, 2010
In ubuntu 9.10, I connect the mobile device and a icon appears in desktop, but it doesn't start and doesn't connect. I went to "network connections" -> mobile broadband -> add -> select contry, bla bla bla ->insert PIN->apply
View 2 Replies
View Related
Jul 9, 2010
I just installed 10.04 on a Dell C800 and I've been trying to connect to the internet via Ethernet with no avail. I did some searching and ran lspci -nn and got this:
user@user-desktop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 02)
[code]....
View 1 Replies
View Related
Feb 24, 2011
I know that there is support for this, but i can't seem to find any appropriate tools. Let's say my widget is at 192.168.1.111; i need to open a terminal window talking to it. Then i can control the things connected to it (it is a bus converter). oS 11.1, KDE 3.5, various machines.
View 2 Replies
View Related
Oct 2, 2010
I have a usb 4G dongle which has stated no linux support in australia from vividwireless.
The flip flop part does not exist for me in the sense I can not see the cd autorun files so I downloaded the files off the net and put them in my wine directory
I attempted to run the exe file thru wine but whether I try graphical or command line....it defaults to a graphical dialog box....I click on English...installer then shows the dialog box for the welcome screen ...then I click on next and the screen shows for a nanosecond the user agreement but exits with no log etc.
2) so in linux here is the info
Code:
Bus 001 Device 020: ID 12d1:380b Huawei Technologies Co., Ltd. but when I press lsusb again....that info disappears....hmmm
ok so
Code:
Oct 3 06:42:35 sid rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1435" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.
Oct 3 07:00:15 sid kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3
[Code]....
View 9 Replies
View Related
May 20, 2010
I have two pci network adapters. I see them in pci device list (lspci). And I see them using ifconfig. How do I relate them - which pci device corresponds to ifconfig network adapter ? (I can't open my hardware and relate them using MAC stickers)
View 4 Replies
View Related
May 26, 2011
I'm currently using SuSE 11.4 and after running the full online updates and restarting the machine as YAST suggested, I no longer have eth0/eth1 available.
I'm clueless about what to do since I'm kinda new to Linux and at the moment, I'm trying out all the distros before making a full commitment to anyone. So far, Ubuntu has been trouble-free from day one, but I'm willing to give this distro (opensuse) some slack.
View 9 Replies
View Related
Jun 17, 2010
I just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run
Code:
ifconfig eth0
the result is
Code:
no such device
The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.
View 2 Replies
View Related
Nov 12, 2010
I have a device (not a pc) connected to my pc via ethernet, it dose not show up in networks, I was hoping there was a way of scanning to detect for it, is there a way of seeing content of it is basically what I'm asking?
View 5 Replies
View Related
Jul 28, 2011
I'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.
View 5 Replies
View Related
Dec 28, 2010
The ethernet configuration files are under
"/etc/sysconfig/network-scripts" such as "ifcfg-eth0:1" etc.
The file looks as follow:
Code:
DEVICE="eth0:1"
BOOTPROTO="static"
ONBOOT=no
IPADDR="172.23.17.10"
NETMASK="255.255.255.0"
ALIAS="yes"
I've set the ONBOOT=no. This means this device should not be activated at boot-time. But as I reboot the machine, this device is activated again. This means the option ONBOOT doesn't work. Seems this is a bug of RedHat LINUX?
View 3 Replies
View Related
Jun 23, 2010
I want to know that in my Linux box under "Network Configuration....>Devices" i can see Device eth1 and Nickname eth0.
The ambiguity in my mind is when we want to down network interface we should call it by device name or nick name
Example
Or
Code:
View 4 Replies
View Related
Aug 29, 2010
I just upgraded to VMWare workstation 7. I was previously running v.6, and an older linux version, and everything was working fine. I moved over the same VM files to the new computer, and it doesn't find the ethernet connection. When I start up the virtual machine, I get an error message:
Could not connect Ethernet0 to virtual network "/dev/vmnet8". More information can be found in the vmware.log file.
There log file doesn't say much more:
Jan 07 17:31:36.928: vcpu-0| VNET: MACVNetPortOpenDevice: Ethernet0: can't open vmnet device (No such device or address)
Jan 07 17:31:36.928: vcpu-0| VNET: MACVNetPort_Connect: Ethernet0: can't open data fd
[code]....
Once xp has booted, I get the "new hardware" wizard, saying that it found an ethernet adapter. However, it can't find any driver for it. I think this dialog started appearing after I added a new virtual network entry using the "Virtual Network Editor". Originally I didn't even have a /dev/vmnet8 file. Now I do.
View 2 Replies
View Related
Dec 26, 2010
Just installed slackware64 13.1 and there is no ethernet device... lspci: Ethernet controller: Attansic Technology Corp. Device 2060 (rev c1)
View 8 Replies
View Related
Dec 21, 2010
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies
View Related
Feb 8, 2010
Cost effective (the people want cheap) solution to increase server storage space with as little impact on throughput (what I want) as possible. I have a server that sends instructions to 20 clients to perform certain tasks. The clients send gigs of data back to the server for storage.
BACKGROUND INFORMATION
Network: Gigabit Ethernet
Clients: (20) HP, Solaris, Linux
Linux Server: Dell R805 PowerEdge (QUAD Core Athlons 16 gigs of ram, 4 gigabit ports.
Selected directories are mounted (NFS) by clients. One directory to be mounted by the clients contains executable files. Mount commands are sent from the server (rsh) to the clients. Yes I know (ssh) but this is how the software was originally written so let's go with it.
The clients then receive commands to execute the binaries contained within the mounted directory. The binaries basically create an image of the clients filesystem including special applications. The client then sends the files and directories to the server which stores this �image�. This process can be reversed to restore a client to the initial baseline image.
In a nut shell, 20 clients are sending gigs of data to the server for storage. I need to attach a NAS (gigabit) to extend the storage capability of the server. The server would mount (NFS) to the hard drives on the NAS. The NAS, configured as a �direct attached storage� device (DAS), means the storage device is connected directly to the server and not the network (which makes it a DAS). This would provide direct storage expansion for the server. However, this configuration cannot be a bottleneck that significantly hinders performance.
Clients <---data---->Server<----storage---->DAS/NAS
1) Will a low end NAS (gigabit port) work? (NetGear 1TB ReadyNAS Duo, RND2110-100NAS) or something with a higher rated throughput (QNAP TS-239 Pro II)
2) Low end won't work, go with �?
3) Does the processor on the NAS play any role that would determine the performance of this configuration given that the server would mount directly to a directory on this device (DAS/NAS)?
View 7 Replies
View Related
May 11, 2011
can i make an animated screen that appears when Debian boots up, i want it to resemble the Mac OS X splash screen with the apple logo in the center and a spiral but instead of the apple logo i want the Debian logo instead just thought it be a cool addition to add to my system it should look like this
[URL]
but i want the Debian logo in the place of the apple logo, is it possible to make a custom splash boot-up screen
View 2 Replies
View Related
Dec 1, 2010
I am not able to configure ubuntu 9.04 on network ,
i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)
View 3 Replies
View Related
Feb 15, 2010
64bit Slack doesn't recognize my ethernet device. ifconfig -a show no eth0. It's an onboard nvidia MCP55 ethernet nic. Never had this problem using 32 bit Slack.
When I try to modprobe forcedeth I get the following error:
repeats those two statements 3 times
I just recompiled my kernel with every possible 10/100 ethernet device included in the modules. Still no go.
View 3 Replies
View Related
Jun 28, 2015
After new installation i can not get USB to work properly, if i insert a usb stick it will not show only if i change ports several times it will show, and will be invisible in dev/tty
View 3 Replies
View Related
Aug 23, 2015
I have debian wheezy GNOME on a dell insprion 15 3000 with an intel core i3 and my problem is that whenever i hover hover almost anything my mouse cursor goes blank until i move it again
View 3 Replies
View Related
Jan 6, 2011
I've been a very happy user of Debian Squeeze (gnome) for a few months already.
Everything works great, but I am encountering an annoying, and regular problem: almost every time I update my system (through synaptic) and reboot, my desktop theme gets reset to the more "blocky" default gnome one.
What I do is run "gnome-settings-daemon," either as normal or super user, reboot, and get back my chosen original theme.
View 6 Replies
View Related
Sep 6, 2015
Debian encrypted LVM disappears every time on sda when I install any other also encrypted Linux distro on sdb.
How can I set up Debian that way that it wouldn't disappear or how can I recover it form UEFI?
View 1 Replies
View Related
Feb 23, 2016
I managed to get Debian up and running on my Encore 2 tablet. Wireless works on the 4.3 kernel, but the interface disappears when I wake the machine from suspend. There are no errors in dmesg, nothing related to wireless in syslog, and the brcmfmac driver is still in the kernel. Removing and reloading the module doesn't make the interface reappear. I'm not sure where to look for the problem.
View 0 Replies
View Related
Aug 19, 2011
During my upgrade this fine afternoon, my system went into screensaver mode and would not bring up the security window. The window would flash for a very brief period and then disappear. I tried to enter the password to no avail. After 10 minutes of this, I gulped and re-booted. It seems to boot ok, but just like in the install, the login security window flashes and disappers. I have tried to type in the data with no luck. Does anyone have a work around? I am currently using my knoppix live disk until I can burn a deb live disk.
View 11 Replies
View Related
