I'm using Chromium 10 from the build service and just installed the upgrade to version 10. Now there seems to be an issue with scrolling. When i go to reply to an email in gmail there is something weird when i try to scroll. The scrollbar will move like i am scrolling but nothing actually in the text area moves
View 9 Replies
It takes about 25 seconds for my Grub to load, about 10-15 seconds of a black screen with flashing cursor before the first (Grub version 1.5 etc) message, then another ten seconds or so with the message "grub loading please wait" (from memory) before the menu appears. Is that normal for a system with three HDs and three different OS (SUSE 11.2 and 11,1, Ubuntu 10.04)? Maybe it is, but it would be nice to shave off a few seconds as Grub now takes longer than booting the OS... Also, when I set the resolution in YaST2 of the Bootloader to my maximum of 1920x1200 (24bit), I get scrolling text over the bootsplash which I didn't get when the resolution was set to the previous value of 1600x1200 (8bit).
View 9 Replies View RelatedI have just done a fresh install of OpenSuse 11.3 I am using KDE4.When I move my mouse and click on a text field, I start typing and the first few keypresses are ignored. Or if I stop typing and pause for a bit without moving the mouse or doing anything, then when I press the next key it is ignored again.If I go to System settings -> accessibility, neither slow keys, bounce keys or sticky keys are ticked.The effect of this is that if I momentarily pause for thought in the middle of writing then sometimes half a word can go missing. Unfortunately this makes the desktop extremely difficult to use as I am always having to check that all my key presses have been accepted.
View 7 Replies View RelatedI just upgraded from 8.04 to the lucid beta (yes I was slow to move on that), and chromium's scrolling is HORRID! It jumps and skips both when I use the mouse wheel or when I drag the scroll bar.
Any ideas? Firefox scrolls just fine. It makes using chromium very unpleasant because any time I have to scroll I feel like I'm back in 1992.
I did some searching and found lots of complaints, so I thought I was close to an answer until I looked at the date, it was late 2008/early 2009 when this was an issue.
Sometimes when I scroll down certain pages using chromium it crashes then the screen turns black and i am presented with the log in screen. I think this is X crashing
View 8 Replies View RelatedI use Ubuntu 10.04 and OpenOffice 3.2.We have forms we use for computers we sell. I have to fill out a profile. The problem is I cannot enter text into the text entry fields. I get this error:"Readonly content cannot be changed. No modifications will be accepted."Here is a link to one of the files. If you try to enter more that a digit or two in a text field, you get that error:[URL]
View 9 Replies View RelatedWhy do you have to press ctrl-L to use the location text box in Nautilus? There used to be a setting in preferences where you could have it always use the text bar. Now you have to use some gconf command in the terminal. The gconf command I've used also will only work for normal users. If I want to open a root nautilus terminal to move files around between my mounted drives then I have to hit ctrl-l every time. It is really annoying because if I am in a Nautilus window there are lots of times where I need to copy the path to something I am doing in the terminal.
Why does it seem like everything involved with Ubuntu is simplifying things at the expense of having options? I thought GNU/Linux was all about options. I guess it still is, but I just cannot understand why you would completely remove options instead of just putting them in an advanced section or something.
Using content proposal in helios, giving problem if u press tab. Below is the error. For recreation snippet is provided(taken from 2 sites) after error log.Only u need to press tab while proposal pop up is visible & then point mouse at client.
#################################ERROR LOG#############################
# A fatal error has been detected by the Java Runtime Environment:
#
[code]....
Whenever I have an open OS-generated window (Software Center, Settings etc), the text will be corrupted if the window is scrolled. This can be restored by highlighting the text - and sometimes it will self-restore given time, but the corruption will reappear if the text is scrolled again.
The behaviour does not happen in program-generated windows, such as Firefox.
Dell 1340 Studio XPS, NVidea GT310 Hybrid SLI graphics.
I am playing around with PyGTK and come across a problem: When I put a TextView inside a ScrolledWindow, and type text into the TextView until it reaches the edge, the cursor goes outside the viewport and I can't see what I'm typing. How to make it so that the ScrolledWindow automatically scrolls so that the caret in the TextView is always in visible?
View 5 Replies View RelatedEnabling visual effects to either of normal/extra result in a serious problem-scrolling down any page results in overlapping of text, which is corrected only when i minimize and maximize the window.
View 4 Replies View RelatedToshiba Tecra. I'd like to upgrade from 9.01 to 11.04 but soon as I select 'Install Ubuntu' on the DVD I just get a screen of scrolling text files rolling by continuously. (I tried installing Kubuntu and Xubuntu and get the same thing)
View 3 Replies View RelatedThis doesnt really bother me at all, Im more curious than anything but- When I first installed fedora 9, during startup there was a bootsplash during the boot process. When the kernal was updated, the bootsplash was replaced with scrolling text (I have done several kernal updates, it was after the first one the scrolling text happened). Is there a way of reverting back to the bootsplash or is it more trouble than what its worth?
View 5 Replies View RelatedI need some help in determining how to have a color splash image display in place of the Linux scrolling-text during the boot-up process on an embedded Linux device. The kernel used is a stripped-down version of Linux (kernel 2.6.29), which has been custom configured. I am using syslinux as the bootloader. I was told that Plymouth might be the way to go with this, but I'm not sure.
View 7 Replies View RelatedI've had a very colorful morning learning the innerparts of Linux's sort command, and have come across yet another issue that I can't seem to find an answer for in the documentation. I'm currently using -t, to indicate that my fields are split by the comma character, but I'm finding that in some of my files, the comma is used (between double-quotes) within values:
Jonathan Sampson,,foo@bar.com,0987654321
"Foobar CEO,","CEO,",ceo@foobar.com,,
How can I use a comma to terminate my fields, but ignore the occurences of it within values? Is this fairly simple, or do I need to re-export all of my data using a more-foreign field-terminator? (Unfortunately, I do not have any control over declaring a different terminator with this particular project).
I'm trying to display fields from flat files where the first 8 fields are always the same. Fields 9 - n are varied but will contain specific patterns I'm after. I'm using this so far because "mySearch" is on each line I want to examine.
Code:
How would you pattern match and include 2 additional fields above field $9 but change field position from line to line?
How can print the, let's say 5nd field to the last field of every record (let's say we have 10 fields)?
I mean: I cant avoid to have to do:
print '{$5 $6 $7 $8 $9 $10}'
I am creating a game with random variables. In the game I have created a dialogue exchange to players. I have set up a table with various returns and I inserted {$fields} to represent various random variables. When I call on the requested fields, I only see the field text and my field names. Am I supposed to parse something and call it back another way?
ie: myfield is: "You have won {$random1} silver! <br />{$wi['gender'] majesty rewards you well." the code I am using to call that field is:
I've just recently put Ubuntu on my 2010 Macbook Pro 13 inch, and all seems to be running more or less alright.One thing i miss from OS X is the ability to reverse the scrolling direction, also inertial scrolling.Is there any way to implement this in Ubuntu?Also, i have already installed the Mactel trackpad drivers.
View 2 Replies View RelatedKaffeine has Empty Video Field, as in it plays a video, the audio comes out but where the video should be is just the screensaver backgroundhrough, even after a reinstallAnyone else having this or had this?Maybe too much fooling around trying to get my tv tuner card working,
View 9 Replies View Relatedi have a file : file.dat with following data
Code:
STORAGE PERCENTAGE FLAG:
/storage_01 64% 0
/storage_02 17% 1
/storage_03 10% 0
/storage_04 50% 1
I need to get the value of PERCENTAGE in a variable for a value of storage passed as variable i have tried the following without success like :
Code:
percentage='awk -vx="$defaultStorage" '{FS=OFS=" "}$1==x{print $2}1' file.dat
I often use the option in Chromium to create 'application shortcuts'. These are instances of Chromium that make a website look more like an app by not including most of Chromium's toolbars. I use it for gmail and google docs and spreadsheets and calendar. In 11.04 I have set up Desktop launchers and copied them across to the Launcher (what an odd way to add something to the launcher, why no right-click 'add launcher' option?)
The problem is that the launcher thinks all these apps are chromium (which they are really, but I would like them to be seen as separate apps). If I minimize my gmail window, a little triangle appears next to the chromium icon, not the gmail icon. To get the window back, I have to click on the Chromium icon. Clicking on the gmail icon launches a new instance of it (also tied to the Chromium icon).
if i run chromium with --enable-gpu-rendering flag chromium's display looks like it's shattered into thousands of pieces and I can't understand a thing. This doesn't happens if I have a previous instance of chromium opened in the usual way, without any flag. In this case if I open another chromium window with the --enable-gpu-rendering flag it's display looks ok, but I can't figure out what's the problem and how could this be fixed if there's solution for it of course.
View 1 Replies View RelatedI installed the newest (11.2?) KDE opensuse last night on my computer. Last night everything was fine but while I slept I guess the Linux Gremlins got to my laptop. Now when I scroll down in Firefox the motion is slow and choppy. Has this happened to anyone else? If so what can I do to fix it?
View 9 Replies View RelatedUsing Firefox 3.6.10 on openSUSE 11.3 with kde desktop on T42 I am finding that I lose control of the scrolling function form time to time. The result is that if I click on the down arrow to go down from the top of a page, the window will scroll down to the bottom of page without stopping, even if I take pointer off the arrow.The reverse is also true if I am trying to go up from the bottom of a page. Great for very fast reader but not for me. Is this a problem anybody else has seen? For me it is new to 11.3 but there have been so many Firefox upgrades since I ran 11.2 I cannot determine precisely when it started
View 4 Replies View RelatedI made a shortcut with chromium browser to listen.grooveshark.com. This is great as it's almost like the grooveshark VIP desktop application like this. However AWN dock groups it with other chromium windows like this:Kuvakaappaus.jpg
Is it possible to force AWN to group this specific chromium window under the Grooveshark launcher that I have in the dock? Turning off grouping does not solve this either, as it just shows grooveshark as another chromium window.
turn off auto scrolling in web browser?
View 3 Replies View Relatedas the title says my CPU goes on C0 state (100%) on every scroll and then returns down after a couple of seconds.
Is it normal?
I've checked this with powertop (and with my ears because I hear the fan noise...)
When a notification comes in on KDE, if I am scrolling a window in FF at the same time, the FF page goes smeared and unusable, and stays that way. Is this a known bug or something I can tweak? I will post a screen soon... (I have to wait for a notification!)
View 2 Replies View RelatedI find that when looking at various SQL tables in the the terminal window, they become un-readable because the table data warps around. Is there anyway to enable a horizontal scrolling window?
View 2 Replies View Related
