OpenSUSE :: Kde4 Clipboard Broken - Evil Magic Trick
Apr 8, 2010
I think that the kde4.x clipboard is mishandled. using any method of copy from a kde app causes the data to be cut instead of copied when pasted into another app (even non kde). Non kde apps behave as expected.
open gedit and kwrite.
type K in kwrite.
Type G in gedit
highlight the G in Gedit
(select copy or use primary)
middle click or paste into kwrite.
fine - there's a G in both editors.
Reverse, copy the K from kwrite and copy paste it into gedit. when you go back to kwrite the K is gone! Evil Magic. what's up? Can't wait until kde 5 or 6 when t gets to be usable again.
View 9 Replies
ADVERTISEMENT
Aug 25, 2010
I was upgrading from 9.X (can't remember what X is) to I believe it was 10.2 (ok, this happened over a month ago and I just haven't had the time to run after it), and lost power. Obviously doesn't sound good, right? Now when I boot I get the message "alloc magic is broken at 0xaff2c150". I have no idea if this error message is indicative of the whole problem, or what, but I can't get back to my system. I would really rather not lose my work.
View 3 Replies
View Related
Mar 18, 2011
I'd like to have a Linux machine run what Windows users typically call a clipboard as a network service on my small LAN (about 10 machines). More specifically I am looking to have Linux run the clipboard service centrally in the LAN with both Windows and *nix machines able to connect to it as opposed to the peer-to-peer sync model that I am seeing in almost all of the applications I've discovered thus far.
View 2 Replies
View Related
Dec 15, 2010
The clipboard corrupts whatever I copy to - when pasting to anywhere. It could be copying a URL in FIrefox to Gedit or from Gedit to Gedit. Always the same.
But this only happens when I am running Virtualbox - Win XP Pro SP3. I have been running the same VM for years - this is a new problem.
I googled a bit and most stated to upgrade to the latest (which I did) and run the Guest Additions (which I have).
I have allocated 1 GB of memory to the VM (out of 3GB). Memory on Ubuntu side is fine:
Code:
Copying and pasting within the VM works fine. And a lot of the memory is free:
Code:
View 3 Replies
View Related
May 14, 2009
I highlight text in an email, "cut". Right click KGPG, encrypt clipboard, select my own public key, go back to email and "paste" and it appears in plaintext! WTF I tested it in kwrite too. Wrote the text "hello world", highlight, cut, encrypt clipboard, select my public key, paste, "hello world" appears! WTFx2
View 17 Replies
View Related
Jan 10, 2010
where we can find the script trick, i found once before then lost it and i search a lot but cant find again.like people do fun and play while learn with script basic. i am talking about shell
View 5 Replies
View Related
Jun 15, 2011
How to remove the auto tab ? After i wrote ( { )In the terminal there is auto tab .. this looks handy at first but :When i copy paste from universal clipboard it keeps tabbing making the scripts very long .. Is there a setting how to remove it
View 1 Replies
View Related
May 7, 2010
I have installed unbuntu 10.04.. since i dont want grub to boot my linux distros , i have installed the bootloader in the root partition (sda9 in my case with no separate partition for boot). Subsequent to successful ubuntu installation i booted using the live cd and extracted the boot loader using the following.
dd if=/dev/sda9 of=/ub.bin bs=512 count=1
Finally i edited the boot.ini (win xp) to show ubuntu in the menu which points to ub.bin.
But this doesnt seem to work... the same had worked with Mandriva 2010
Where did i go wrong ?
View 6 Replies
View Related
Oct 10, 2010
I have this weird program: dns2tcpc (creates a dns tunnel). I would like it to run at startup. However, I found that the program doesn't work when backgrounded! EX: dns2tcpc -z dns.domain.com -l 8888 208.67.222.222 Works, and I can use SSH to port 8888. However, if I try to background it, like: dns2tcpc -z dns.domain.com -l 8888 208.67.222.222 & Then trying to connect to SSH won't get any response
Now, I know this is a bug in dns2tcpc, and I really don't feel like compiling it or anything (I may have to), so is there any way to "trick" an application into thinking it's running in the foreground (like typing the command from the terminal window)? (Bonus if no addition installation is required)
View 2 Replies
View Related
Mar 28, 2011
I am looking an neat trick / elegant solution to manipulate / modify hostname and set a variable to the value inside a script.I have figured what I want to do.I just want to know how to set the variable correctly ?
View 1 Replies
View Related
Apr 28, 2010
I'm experiencing a wierd bug. Been having it for some time now. I haven't posted about it before since its only been annoying, but not really setting me back. And I have trouble defining and explaining the bug. Today it crossed the line into actual annoyance.
The bug occurs when I'm writing, using the keyboard on my laptop. Both when I write in browsers, like when writing this post, and when I write in openoffice. So its not limited to one program. In webbrowsers what happens is that all of a sudden the browser loads the previous page in the tab. Like I told it to go one step back. In OpenOffice something similar happens. The curser jumps up in the document.
I used to have this bug when touchpad-tapping was enabled. I have a habit of drumming my thumbs on the touchpad when typing. Therefore I've disabled tapping on the touchpad. The bug is reocurring, however I have not found a way to reproduce it. It might be a key combination I accidentally hit when typing away, but I'm not sure.
View 4 Replies
View Related
Jun 21, 2010
I searched every which way I could to find this out, but to no avail. Can anyone address this query?
View 9 Replies
View Related
Aug 11, 2010
Don't know what happens, but I cannot update to KDE4.5 Neither zypper nor yast seem to see what is in that repo, even with higher priority.
[Code]....
View 7 Replies
View Related
Jan 11, 2010
The restricted format FAQ sticky (Restricted formats - openSUSE) mentions a package called "kde4-k3b", but this doesn't show up in my listing. Which repository does kde4-k3b reside in? 11.2 KDE
View 7 Replies
View Related
Dec 26, 2010
I've been trying to get multiple monitors going on my laptop (thru the HDMI port) and did fairly well, but the ribbon/panel/whatever (at the bottom of the screen with launcher, etc.) is now gone and I can't find it (even with zoom-out). At first it was only gone when I disconnected the external monitor, but was present when both monitors were attached. Now it's always gone. Is there a magic reset-the-desktop to default (without reinstall) command?
HP dv7t-4000, ATI5650HD, 8GB, OpenSuSE11.3x86_64 + KDE
View 6 Replies
View Related
May 14, 2011
After several crashes during videos it seemed like a good idea to fsck root. Downloaded the latest systemrescuecd and ran it at boot. The error message was 'bad magic number, corrupt superblock' with a suggested command to try another superblock. That failed with the same message. Tried tune2fs to force fsck at boot and got the same message. The drive is less than 6 months old and the installed system is working more or less ok. The command I used was 'fsck.ext4 /dev/sdc2'. What am I doing wrong?
View 9 Replies
View Related
Mar 3, 2010
if the original 11.2 iso will be reworked to include KDE4.4 SC.
View 3 Replies
View Related
Mar 7, 2010
I've been experiencing a strange problem with Plasma locking up. Running system monitor it shows the KDE4 process using 20% CPU time, and Plasma around 10-15%. This seems way too much since on my six year old Laptop the cpu load of both processes is barely noticeable. My Laptop is an old single core 3000+ AMD Athlon 64, while my Desktop has a Quad core Xeon 2.33Ghz chip, so the fact that the KDE4/Plasma system load is many times higher than on the Laptop, indicates something is wrong.
I'm not sure what else to look for troubleshooting wise, any suggestions? *Actually, thinking about it, the KDE4 process is timing out one CPU core, which indicates to me something is really not right.
View 9 Replies
View Related
Mar 10, 2010
I am hitting a wall here - with the new 4.4 installed and working well, the one thing that is killing me is not being able to read the active taskbar item or the plasma peanut menu (see screenshot. You can see that the firefox and gimp are "active" and too dark to read, while kwrite is inactive and readable.They are BOTH too dark, and I cannot seem to find the option that controls those color elements.
View 9 Replies
View Related
Apr 5, 2010
I got autostart working on 11.2/gnome, but I've switch to kde4.3.1. Duncan on the kde list suggested to manually save a session, but in the session manager there's not a clue how to manually save a session. In gnome I wrote a shell script to start kinternet, but the script has to start after smpppd. That script starts too soon in kde4.The reasoon kinternet doesn't start with the "restart on login" box, is a kde3 app. I have already tried kinternet --kicker, but apparetly kicker starts before smpppd. The script I wrote starts kinternet but with this error:
Error - KInternet Connection to local and remote server refused. Maybe smpppd is not running or you are not member of the group "dialout". Also check the server settings in the dialog "Various Settings". OK
The error to the calling shell looks like this:
Starting kinternet --kicker
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
buildsycoca running...
View 9 Replies
View Related
Apr 27, 2010
I worte somewhere in time here about this, but I cant find it.. I have a problem, when starting KDE, it begins to start applications, usually the ones that were open (thanks God)... however, order is a bit screwed... It opens Skype, KTorrent, Kopete, Sound, Keyboard and finally, NetworkManager...I would like to put Network to be ran 1st.
View 9 Replies
View Related
May 14, 2010
In order to switch between dual head and single head, I need to log out of KDE4 and log in again immediately, which is annoying. How can I avoid that?
Is it possible to restart X without quitting KDE?
At work, when my laptop is docked, I use a dual head configuration (internal + 1 external screen), but at home I use the laptop without a second screen.
Using the binary nvidia driver, the laptop always selects the correct configuration upon booting (TwinView), but not upon hot-plugging.
I would just like to suspend the laptop and continue before/after commuting.
View 3 Replies
View Related
Aug 31, 2010
I've been running KDE4 with Suse 11.2 for about a year or so now, with no problems. Yesterday, the background to my screen suddenly went black. Open windows were unaffected, but I could see my theme, the task manager, etc. I couldn't open any programs other than the ones already open (and ones that they launch).This problem was system-wide, in that it affects all accounts on my machine.I thought I'd solved the problem after discussion with someone by email, by forcing KDE to recreate itself. I did this by
mv ~/.kde4 ~/oldkde4
then relogging. This, in itself, seemed to make matters worse, so I went
mv ~/.kde4 ~/newkde4
mv ~/oldkde4 ~/.kde4
and relogged. To my surprise, everything worked thereafter for a few hours.
I think this was coincidence, because, after a few hours, the same thing happened and the "fix" didn't work anymore.I checked .xsession-error and it says
/etc/X11/xim: Checking whether an input method should be started.
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
[code]....
View 8 Replies
View Related
Oct 18, 2010
I find it incredible that installing and running reputable software such as Clamav on my system should be a major problem. I have openSUSE 11.3 with kde 4.5.2 desktop and when I try and install clamav using Yast the files are downloaded into old kde3 directory and nothing works.
View 9 Replies
View Related
Nov 22, 2010
On SuSE 11.3 x 64 when I log into KDE4 the screenlets appear and work normally. If I log into Gnome or lxde the screenlet manager appear but screenlets themselves don't.
View 4 Replies
View Related
Nov 27, 2010
I'm using the system system monitor applet, and ksysguard, with lm sensors to monitor CPU / GPU temps and fan speeds. Works great, and I love the system monitor applets fuel gauge style display. However, I don't see any way to configure maximum temp thresholds in either of these. It appears that ksensors previously allowed the configuration of temp alerts, but this appears to be a pretty old school app at this point. I am surprised that ksysguard and system-monitor don't have alerting functions. Am I just missing this, or is there another applet that is currently providing this functionality?
View 2 Replies
View Related
Jan 26, 2011
I Just Installed Opensuse 11.3 on Dell INSPIRON N5010 laptop in dual boot with windows 7 installed.The laptop boot up(OpenSuse GUI is seen during boot) to run level 5 with only two errors;1. Failed service in runlevel 5 nscd2. Skipped services in runlevel 5 cif nfs.there after it give me a login in in like command line(no GUI mode loaded but on the background I see the OpenSuse Icons like the desktop was loaded), I can login in a that command line and get the laptop receive IP and do other service like ssh/telnet and other command line functionality but I don't have the KDE4 Desktop to allow me launch applications in GUI mode
View 9 Replies
View Related
Jan 31, 2011
Its here [URL]...
Obviously, due to dependencies,
version 11.4-82.2 of
kdebase4-runtime-branding-openSUSE
kdebase4-workspace-branding-openSUSE
kdelibs4-branding-openSUSE
kdm-branding-openSUSE
will not install.
64bit version works great for me. Only hic-cup noticed is mouse cursor theme seems inconsistent after reboot unless Oxygen White or Black selected.
View 4 Replies
View Related
Apr 22, 2011
I remember installing basket notes in ubuntu and it's in kde4 I tried installing it in 11.4 64bit and it's in kde3. Is there a way to install it dressed up in kde4?
View 1 Replies
View Related
Jun 4, 2011
I cannot find workspace in kde4 under 11.4. I try to add from taskbar option, but find nothing.
View 3 Replies
View Related
