I just did a clean install of Natty yesterday and have been setting it up for my children and myself. I am trying to set up desktop user accounts for them without them having to put in a password for themselves but have not been able to change this via system/administration/users and groups. Is this a bug or is this feature (turning off passwords at login) turned off in Natty?
View 4 RepliesI wonder if it is possible to have two passwords for one user account in 9.10. I have a long login password (5 words about 45 characters with spaces caps). I would like to set a shorter password for Authentication, sudo, etc. While retaining the original for logging in.In short:Have long password to login to computer.Have short password for everything after login.
View 6 Replies View RelatedI was wounder if there is a way to add two different passwords for one user.
View 14 Replies View RelatedI've just installed 10.04 x64 and I've had some problems with samba (cifs/windows file sharing). It seems like samba is forgetting user passwords, so on every reboot I have to add a password for the user that needs access: sudo smbpasswd -a tietze
I've tried restarting samba (sudo service sbmd restart), but it does not work. I have to add a new password for the user with the command above.
I tried to google a bit for a solution, but only found the following thread with a problem that seems related: [other] Samba forgets user
making samba remember passwords betweeen reboots/shutdowns?
I was wondering if someone had a logical reason and therefore complete, hopefully that makes total sense, for why when I install Ubuntu I cannot use the 'sudo' command either with root or user passwords. Even if I try to edit the permissions for sudoers, I still recieve an error message that says access is denied and so as the root user on my pc I don't understand why I can't put my name in the sudoers file or use the sudo command with the correct password.
View 9 Replies View RelatedHow to I get linux to stop prompting me for a password and remember it? For instance, when using the root user, I always get prompted, but I would rather only be prompted once per user session.
View 1 Replies View RelatedI am doing samba file sharing. I got struct in problem relating reading passwords. I have to read password whatever user enter from web interface and process it. And through that password and username the user must log on from windows system. I have to write appropriate shell script for this. this is all i am doing for sharing files through samba.
View 2 Replies View RelatedAttempting to set up a Samba network from my SuSE 11.2 desktop to a windows laptop. Using YaST, a Samba server has been created, and allow users to share has been clicked. Identity is not a domain controller. no trusted domains have been set, and no LDAP settings have been set.
Right now, each computer can see the other over the network. When clicking on the network from windows, a window pops up requesting a user and password.
Konqueror sees both computers under smb://. It also has a window that pops up requesting user name and password. Where do I set up these user names and pass words?
I am having a problem with some users who get locked out after more than 3 failed attempts at login. This is exactly what I want to see - they will eventually remember those stronger passwords (maybe?) - but how do I re-enable their access? I haven't tried this on a live box but I can easily recreate the situation via vnc to the server in question and I assume the result would be the same. I like the policy that leads to this but I do need to let them back in - eventually. Where is the blacklist kept and how do I edit/reset it?
View 3 Replies View RelatedI have couple of users in one machine. I can access the /etc/passwd,/etc/shadow and /etc/group files in this box. I have another box. I want to create some user accounts in the second box by just looking in the passwd, shadow and group files in the first box. I would just copy over the corresponding lines into the corresponding for whichever accounts I want to create as new and also change the lines for which I want to update the account information. Is this possible and will also the passwords work fine? Please also let me know there is any good tool for automatically doing this kind of stuff. Both the boxes that I have are Ubuntu machines though one is running Ubuntu 8.04 and the other is 10.04.
View 5 Replies View RelatedI have an ubuntu server set up in which i would like my shared media directory to be accessable with multiple usernames / passwords because I use my admisistrator username and password for samba as well, but I do not want to give out that password to all clients in my house. And, I would like to have write permissions but keep other users to read only. Is this possible or do i need to just make one separate username / password for samba sharing?
View 1 Replies View RelatedHow should I organize user logins and passwords within a 6 person firm? We have several desktops, portables, servers and virtual machines. Everyone should be able to log in on each PC. Ldap seems overkill. Would NIS be more suited?How can I integrate other passwords like samba, mysql, vpn, ... Into this strategy?
View 4 Replies View RelatedRunning SunGard Banner software on RHEL 4.2 x86-32 bit Linux server Oracle Application 10.1.2.3 samba enabled. Users run processes/reports that are logged in a daily log file. In our daily job submission log files the user password shows up as clear text.The password shows up as $PSWD (sample from the logfile):
$JOB
$BANUID
$PSWD
[code]...
I'm planning to centralize users and passwords and also create controls for user access to some equipment, for example, Linux Servers, Switches, routers and firewalls. In case of failure of the link between the ACS and AD or equipment to the ACS, this device would use local username and password.
At the moment, my AD structure is a Microsoft, Cisco ACS servers and Linux Standalone. I wish that both linuxs servers and network equipment were authorized by Cisco ACS on the accounts that are in Microsoft AD.
The configuration of the Cisco ACS to use the AD is done and no problems, the network equipment is OK too, but am having difficulties configuring the server for this solution.
1)If I installed the Alpha-1 11.10, is it easy to upgrade to newer versions later on until the Final Release?
2) How to make the desktop taskbar appear in ubuntu natty of Unity desktop as previous Gnome? Possible or not?
First off I got to say that Natty is pretty interesting. I really like the space-saving techniques with the omni-bar, vertical app panel, and very fast omni search (similar to windows 7 but much faster). It will take getting used to but I think in the end it will eventually make working much easier and quicker.
It is in beta so I won't get ahead of myself and make assumptions but it seems like Ubuntu has sacrificed a lot of customizability with this release. A few things I've notice that maybe I can get some clarification on-
1. I cannot add panels or items to panels.
I would like to add the system-monitoring tools to my top panel so I can see when my CPU and RAM spikes.
In addition, pidgin no longer appears in my tasks bar. I'm guessing this is a bug? (I prefer it over Empathy. Rather not switch).
2. I cannot find a feature that leaves my vertical app bar visible all the time. When I make an application go full screen it pushes it out of the way. This is a bit annoying when I'm trying to find a file, folder, or application quickly.
Also when I open a file that I didn't mean to open I would like to see it popup in my app bar so I know instantly where to find it and close it. With this I will have to search for it.
Of course this all takes only a few extra seconds.
3. I cannot change the size of my apps in the app bar and it doesn't automatically resize. This might not be a big issue for some but I use my Linux OS solely for work. As a developer I often have upwards of 20 files open and it usually fills my screen when using my avant window navigator. This is significant since I have a wide and short monitor.
4. I am unable to change the orientation of the app bar. This goes back to the fact that I have a wide and short monitor. Because of this it may seem better to fill up space vertically by adding a vertical app bar, but I have so many apps and usually work in text-documents that it would be better for me to have a horizontal app bar.
5. Unable to remove unneeded buttons. My app bar is going to fill up very fast. I do not need a workspace switcher, a home folder, the applications button, or the trash visible in this app bar. I will use these rarely and I would rather make room for apps I use often.
6. Apps at the bottom of the app bar does not adjust context menu accordingly.
However I do like how Ubuntu is finally clipping unseen areas. I am using dual monitors and the one you are looking at is the short one. So when i take a screenshot I can see black area below. In previous versions I would be able to see the overflow. Does this also mean we are finally double image buffering as well?
7. I am unable to change desktop effects. I don't need a massive fancy shadow on every window. I prefer speed over desktop effects (but use Ubuntu for non-free software support).
8. I cannot move the Files & Folder button to the top. I would have use for this context menu since there is no longer a places button in the top panel. But I would rather have it at the top so I can access it easier.
9. Cannot clear recent file's history. As a developer I've worked on a couple adult entertainment related sites. I like to keep these hidden from my little ones for obvious reasons but now it seems there is no way to remove them from recent file history. There should be a context menu for this.
I installed Natty in a VirtualBox VM (running in XP), and all I see is an empty Desktop with background. No Launcher or anything else to run anything.
It is obviously running, because I can right click on the desktop, create a folder and navigate round. If I navigate to an application I can run it.
Rebooting to Classic works (if maybe a little slower than 10.10).
I wanted to try Unity, and assume it is trying to run.
I just upgraded to 11.4 and was surprised to find my desktop completely changed. The main reason I use Ubuntu is because I could customize the desktop environment how I wanted. Now I can't seem to move or adjust anything. Does anyone know how to move the menu and launch bars? The biggest thing I want to do is move the launch bar to the bottom of the screen.
View 1 Replies View RelatedJust upgraded to Natty and ... well my whole desktop changed, it has that weird menu on the side ... etc. Is there a way to get the old desktop back? (with my apps menu in the top bar like it was before)
View 5 Replies View RelatedI'm was running 64bit maverick on an intel i3 clarkdale desktop; pretty much vanilla with the compiz spinning cube desktop displaying on my 720p HDMI telly. On 'upgrading' to natty my pc refused to display anything on the telly but can still be connected to via ssh. Assuming unity was the culprit I installed gnome and deleted unity; after plugging in a VGA monitor I finallly got an output onto a display device, then managed to configure the HDMI telly as a secondary display. Gnome is just a backdrop with no panels at all; I managed to get panels by ctrl-alt-T and typing 'gnome-panel &'; but this was only a temporary fix. If I try to run a terminal now it locks X and I can only restart via the ssh session.
Currently all I have if I boot is the gnome backdrop. The pc auto logs on (as it did under maverick) so alternate logon screens can't be accessed as pretty much all I can do is run stuff via an ssh shell on my other pc.
What I'd like to do is have my desktop how it was before natty trashed it. Preferably without unity or its very irritating scroll bar widgets.
I can't get uTorrent installed on my natty Ubuntu desktop pc. After downloading the file, I've copied all the files for the web admin to /var/www. When I run the executable, cpu load goes to 100% and nothing happens . When I go to localhost/ it says loading for a long time, and then " Can't talk to uTorrent client. Try reloading the page."
View 4 Replies View RelatedI installed the upgrade today and it gets to the login screen fine, lets me login ans then when the desktop loads it just has "flashes", when i click the menu mar (which cant be seen properly it flashes up then disappears. was working perfect as my backup server before this. Any ideas? i can't even cet a command prompt up!
View 4 Replies View RelatedI used the command "update-manager -d" to put Natty Beta 2 on my Acer Aspire One netbook. It worked perfectly, but took about 7 hours because the SSD is so slow. The upgrade replaces the Netbook Remix of Ubuntu 10.10. Now my desktop is full of icons that weren't there before. They are the files and folders in my home directory. Until yesterday, my desktop icons showed the contents of the subdirectory $HOME/Desktop instead. How can I restore the former behaviour?
The desktop icons are being provided by Nautilus. I know this because I can drill down into the Nautilus options using gconf-editor and un-check the box that makes Nautilus manage the desktop. This makes all the icons go away. So I know how to get (1) lots of icons [the wrong ones] or (2) no icons at all. I'd like an elegant clean way to achieve (3) just a few icons [the right ones]. [My idea of "elegant": some way to inform Nautilus about which directory to look in for the purpose of generating icons for the desktop.]
how the current full desktop stack looks like for Ubuntu Natty? I assume it should roughly look like this:
Unity
Compiz
Gnome
X
Is this correct? Any other levels that I missed? Where would Wayland stand (in the future) here? I assume it will just replace X?
I am using xRDP to remotely log into my desktop. I have my user set up to use the classic no-effects desktop when logging into the console. Problem is, when I log in via xRDP, it uses unity. How do I tell the machine to use classic no-effects when using xRDP?
View 1 Replies View RelatedI'm trying to put in an extra command on my skype.desktop launcher to make my webcam work properly, however whenever I add the ff. to the Exec line:
Quote: Exec=export LIBV4LCONTROL_FLAGS=3 && LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so skype the skype launcher doesnt work. However, it works fine when I try to run the same command on the terminal.
Trying to install openFOAM on natty desktop seems to be a problem adding openFOAM to the repo and later some compilation error
View 1 Replies View RelatedWhile I was trying to drag the Desktop icon to the places sidepane in nautilus file browser so that I can have it above Documents icon, I accidentally dropped it in Documents icon. I immediately deleted the "Desktop" shortcut that was created in "/home/user/Documents" but it was too late already and the damage has been done. When I try to create a new document on my desktop, it says "Error while coying to Desktop There was an error getting information about the destination. Show more details Error stating file '/home/user/Documents/' Desktop':No such file or directory" Now, I know that my desktop now is pointing me to a location in Documents folder which doesn't exist at all. I tried looking for any available settings/options in gconf-editor, but only in vain.
View 4 Replies View RelatedTrying to install ubuntu 11.04 drove me nuts until I found this page .
My system is an ASUS moderboard with an AMD chipset. The solution came when I entered the BIOS and disabled the cool&quiet feature for the chipset.
After installation, I have to keep cool&quiet disabled in order to run ubuntu. Re-enabling cool&quiet results in ramdon restarts or freezing
For years I've had ctrl + alt + 1-4 (keypad) as shortcuts to desktop 1-4. It's worked flawlessly under everything from Slackware, through Debian and even the gnarled mess that Ubuntu is becoming.But now, ctl + alt + 1 dumps whatever window is active on my desktop to the bottom left corner of that desktop. Ctrl + alt + 3 dumps it to the bottom right corner;A7 goes top left and you can guess the rest.
View 2 Replies View Related