I recently upgraded my flavor (Arch, latest version) and now I am unable to connect to samba (latest version; obtained through pacman) either through Windows or Linux. My error logs reveal: (/var/log/samba/log.smbd)
[code]....
nmblookup shows what it should but smbclient -L gives the generic "Error NT_STATUS_UNSUCCESSFUL". I also tried to reinstall Samba. I am not sure why it continues to try for CUPS, as I do not have printers listed in smb.conf.
Attempting to set up a Samba network from my SuSE 11.2 desktop to a windows laptop. Using YaST, a Samba server has been created, and allow users to share has been clicked. Identity is not a domain controller. no trusted domains have been set, and no LDAP settings have been set.
Right now, each computer can see the other over the network. When clicking on the network from windows, a window pops up requesting a user and password.
Konqueror sees both computers under smb://. It also has a window that pops up requesting user name and password. Where do I set up these user names and pass words?
On a fedora 10 server i have installed a samba server.When i log in from Mac OS X as user 'jody' with my password for the server,i get access to the directories on the server.But when user 'ani' logs in with her password for the server,the connection is refused.Both users can log in directly at the server.For user 'jody' the entries in the samba log are:
Working in CentOS. Want to have drag-and-drop SCP access to another system.
Opened up the file manager (nautilus) and went under File -> "Connect to Server". Filed in the information, hit connect. The connection will sit forever and will never properly establish. It creates an icon on my desktop, but noting else.
If I go into terminal, su to root, open nautilus and then repeat the process as a root user, then it works successfully. Connection established after I trust the remote host. File transfer works fine.
what is occurring when I attempt to connect as my normal user?
I am trying to establish an ssh connection to my server. I have a regular ssh connection working through the command line, so I know my key works and I have the port forwarding on the router correct.
When I go to Places -> Connect to Server the window comes up properly. The only problem is that the drop down menu only has one option in it for Service Type. It is Custom Location. I have had this set up in the past and there were other options there. I chose the ssh connection and everything was fine. Now it doesn't work.
I have tried to completely uninstall nautilus and reinstall it, but that didn't work. When I did uninstall it, I uninstalled gnome-session as well, and I reinstalled that one too.
I have Fedora 12. I just wanted to know that for demonstrating a DNS mechanism between clients and a host, how to establish a domain ? Do I have to configure an Apache server ?
Running Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
I am trying to install tomcat (apache-tomcat-6.0.24) on a Redhat machine.Post installation, I find the url: working fine untill I click on 'Tomcat Manager' where it gives me the following message: Failed to Connect.Firefox can't establish a connection to the server at localhost:8080.Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later. * Are you unable to browse other sites? Check the computer's network connection. * Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
Since a few days ago, I have too much problems to connect.When I try to connect to Internet with Firefox, the following message is printed out (, most of the times):Code:Unable to connect Firefox can't establish a connection to the server at URL...
I've been living a dormitory for a while and our net connection is very slow because of the download via torrent or rapidshare, hotfile etc.(we have 4megabit speed unfortunately) I want to establish a ubuntu server and there are 45 people in our dormitory. Which ubuntu server version I'll use? How much storage that I have (i thought 4 tb is enough)? What kind of commands do I going to use and permissions. I want to appoint one person as a admin others just can add a file (music, movies vs.) they wouldnt have to delete!
I have just installed Google Desktop. When I do a search it says: Unable to connect Firefox can't establish a connection to the server at 127.0.0.1:38552.
I'm having a problem whereby I'm able to send mail to a mailbox from several different email addresses and SMTP servers (gmail, RoadRunner broadband), but I'm unable to send mail to the same address from one particular account, the SMTP server for which runs on a mediaTemple (dv) 3.0 box with CentOS 5 Final.I've spent a full workday on the forums, trying to troubleshoot the issue, and I'm running out of ideas.The server on which I'm having the mail processing problem is a mediaTemple (ve) running Ubuntu 10.04 x64 (Linux 2.6.18-028stab070.7 #1 SMP Fri Oct 1 13:53:00 MSD 2010 x86_64 GNU/Linux), with ISPConfig 3. Here's how I setup the mail-related aspects of the Ubuntu box:
I have a home DNS server that has been working for some time today. Today I restarted to restarted it to clear the cache on it and now it refuses to answer and requests. Named starts fine with no errors. Here is named config file that worked for about 2 weeks fine and now doesn't want to work.
I have a strange problem where I can connect to any site except for [URL]... with the latest Firefox and Google chrome both can connect to [URL]... Using Ubuntu 10 not 7.10 FireFox: Unable to connect Firefox can't establish a connection to the server at [URL]...
* The site could be temporarily unavailable or too busy. Try again in a few moments. * If you are unable to load any pages, check your computer's network connection. * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Google Chrome: This webpage is not available. The webpage at [URL].. might be temporarily down or it may have moved permanently to a new web address. More information on this error Below is the original error message Error 2 (net::ERR_FAILED): Unknown error. Really Strange is that every other site is fine?
I installed required updates on my linux installation (ubuntu 9.4) I am now unable to access my localhost, and get the following message from my browser: Failed to Connect Firefox can't establish a connection to the server at localhost. Though the site seems valid, the browser was unable to establish a connection. I checked my hosts file which has the following information:
I've had Dovecot up and running for months now without any problems whatsoever. Came in this morning and suddenly I can't connect to it. Thunderbird hangs with "Checking mail server capabilities..." and Windows Mail spits out the following error:
Code:
Cannot establish TLS with IMAP server 10.0.0.2:143, SSL_connect error 336142597
Configuration:
Account: Blah Server: foo User name: whatever
[code]....
Thing is, I'm not using TLS/SSL and have changed exactly nothing since the server was set up. I've tried having the mail clients use SSL/TLS in response to the above error, but that changed nothing.
I need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
I am trying to deploy Kerberos and LDAP so users will be able to login in to a server on the edge of the LAN, and afterwards be able to establish a SSH connection to all the computers in that LAN without the need to type any passwords, and without the need for me to manage SSH keys [beside the SSH keys on the login server] and local user accounts.
1. When i create the users in OpenLDAP i use a template that i created by reading documentation from the Internet. In the template one piece of information that is neede is the UID. Is there any clever way the keep track of the numbers so i do not assign the same UID to two users, besides using a pen and paper?
2. For the users to be able to establish SSH connections between the computers, the host is going to be added to the keytab like this: ktadd host/client.example.com Is is possible to replace client with something genric so i do not need to mange these keytab files between the hosts?
3. Users will be logging on the the server on the edge of LAN by using SSH keys. How can i configure the setup so the users will recieve a ticket automatically when the logon without executing kinit and without entering a password, just by having a valid SSH key?
4. krb5kdc is running on all the network interfaces in the server i want it to only run on eth1, how can this be done?
I am currently running the latest version of Bind, and for some completely unknown reason I can NOT get queries to work for PTR records. All queries to the servers for reverse name lookup get query denied:
Using domain server: Name: 66.150.173.1 Address: 66.150.173.1#53 Aliases:
Host 27.173.150.66.in-addr.arpa not found: 5(REFUSED)
And it shows in my logs:
I am at my wits ends with the piece of crap. Can anyone shine some light on why this damn Bind install won't respond to these queries?
I have one machine (out of a couple dozen) that continues to refuse to allow "vncserver :1" to start. It is perfectly happy with :2 - :9 but tells me :1 is already running - yet ps tells me that there is no running Xvnc instance. What have I done here and how do I get that session back? I've cleared the /tmp/.X11-unix entries but that did no good. Could I have checked something in Yast that is launching an invisible session?
started setting up my 3rd ubuntu server under the OS of Ubuntu Linux 9.04 64 bit. I have configured the server to allow root access and am using this to execute this file. As you can see from the screenshot of PuTTy, the file exists but is refusing to load up. I am also able to nano the file. I have tried moving the file to /root/ and still had no luck.
I need to force a shutdown. It seems I have lost an array and now the system refuses to shutdown. Code: echo o > /proc/sysrq-trigger gives the warning but no dice. reboot -f = nothing.
I have installed bind from the repos and am trying to setup a caching name server. After copying the stock name-cachinging.conf to named.conf, I tweaked named.conf to reflect my LAN:
options { listen-on port 53 { 127.0.0.1; 192.168.1.102; }; listen-on-v6 port 53 { ::1; };
I have a strange problem with evolution in Fedora 14. I run my own mail servers (Postfix and Dovecot) on localhost. This all worked great in F13 but now evolution refuses to connect to the localhost imap server. If I connect from my laptop (also F14) i.e. not from the localhost all works fine and great with evolution. I deleted all the config and started again to no avail. I also created a new user and logged in with this user and I still get the same so looks not to be user config issue. evolution --debug=evo.debug.txt returns nothing useful. Dovecot is listening on localhost as I can telnet to the imap port. Also other imap clients like Thunderbird work fine.
I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!
I am setting up a new server and am in the midst of testing RAID. This is an Ubuntu 9.10 server. RAID1 (/dev/md1) is spread across 12 one-terabyte SCSI disks (/dev/sdi through /dev/sdt). It has four spares configured, each of which are also one-terabyte SCSI drives (/dev/sdu through /dev/sdx). I have been following the instructions on the Linux RAID Wiki ([URL]....
I have already tested the RAID successfully by using mdadm to set a drive faulty. Automatic failover to spare and reconstruction worked like a champ. I am now testing "Force fail by hardware". Specifically, I am following the advice, "Take the system down, unplug the disk, and boot it up again." Well, I did that, and the RAID fails to start. It outright refuses to start. It doesn't seem to notice that a drive is missing. Notably, all the drive letters shift up to fill in the space left by removing a drive. The test I did was to:
[code]....
Is removing a disk from the bus a reasonable test in the first place? Meaning, is this likely to happen in a production environment by other means than a human coming by and yanking out the drive? Meaning, is there a hardware failure that would replicate this event? Because, if so, then I don't know how to recover from it.
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
=============================================================== [2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42) INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
