OpenSUSE :: EID-belgium And The Config Module Are Not (yet) Available For 11.4

Mar 16, 2011

eID-belgium and the config module are not (yet) available for openSUSE 11.4. No big deal, I can wait as I'm sure it will be compiled once these days. Though, there's one thing that I'm interested in. The packages for pre-11.4 always required hal to be installed and running. With openSUSE 11.4 hal got removed as it is deprecated. Is there any chance the eID-belgium packages are going to be delivered without hal support / requirement? I can't think of pulling hal back in just for one app.

View 6 Replies


Ubuntu :: Gdlib-Config Not Found For GD CPAN Module

May 8, 2010

I installed GD Package from cpan in ubuntu 10.04, but I need gdlib-config for this module. I installed libgd2-noxpm but I continue to have this problem.

View 1 Replies View Related

OpenSUSE Install :: Failed To Load Module "fglrx" (module Does Not Exist, 0)

May 8, 2011

I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:

Failed to load module "fglrx" (module does not exist, 0)

I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?

View 5 Replies View Related

Debian :: How To Add A "module Config"

Mar 2, 2010

I'm trying to get sound to work on my DELL Inspiron 1525. I can hear sound, but extremely low. According to this web page [URL] I have to:

"add a module config for snd-hda-intel, e.g. in /etc/modprobe.d/local.conf"

I run on the terminal the following command:

$ head -n 1 /proc/asound/card0/codec*

The output is:

==> /proc/asound/card0/codec#0 <==
Codec: Conexant ID 2c06
==> /proc/asound/card0/codec#1 <==
Codec: Silicon Image SiI1392 HDMI
==> /proc/asound/card0/codec#2 <==[url][/url]
Codec: SigmaTel STAC9228

So what does this mean? The guy at the webpage has STAC9228, but I don't know what's mine, because there are three codecs (0, 1 or 2) and only the last one is the same as the one shown on the page. Despite this, I tried openning /etc/modprobe.d/local.conf with nano, but it was a new file, so I supposse there's nothing to add there. In the web page it says I have to add module config, but I don't really know what that is. Is it this one?: options snd-hda-intel model=ref

View 14 Replies View Related

OpenSUSE :: "canberra-gtk-module" Error Failed To Load Module "canberra-gtk-module"

Jan 28, 2010

OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!

now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": cannot open shared object file: No such file or directory ...and lots more

View 3 Replies View Related

OpenSUSE Install :: Mirroring Repositories With Rsync: Module Opensuse-full Is Broken?

Dec 1, 2010

The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:

rsync -rlpt -hi -stats /drive/repo


View 5 Replies View Related

Hardware :: Partport Module Is Seeing Parallel Port But Lp Module Doesn't Found Any Device

Mar 3, 2011

I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.

View 3 Replies View Related

Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?

Jun 1, 2009

When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:

[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists


Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.

Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.

View 3 Replies View Related

Ubuntu Servers :: Enable The Rewrite Module In Apache To Enabled The Module?

Jan 28, 2010

I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled

Now I create .htaccess in my apache folder (/home/user/apache), and I write this:

RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?

View 1 Replies View Related

Ubuntu :: Error While Hash Checking Of Torrent - The Sha Module Is Deprecated - Use The Hashlib Module Instead From Sha Import Sha

Jun 8, 2010


nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/ DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha

These errors occurred during execution:

[09:37:48] IOError - [Errno 5] Input/output error

Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.

View 2 Replies View Related

CentOS 5 :: Svn Server Config - Understanding Location Svnpath Parameter On Svn Config

Sep 7, 2009

I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config


View 1 Replies View Related

General :: Adding A New Kernel Module To Wireless Driver Module?

Apr 22, 2010

I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.

View 2 Replies View Related

Ubuntu Servers :: Config - Change / Add From The Default OpenSSH Config Files To Get Tunnelling To Work?

Jul 10, 2011

I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:

Code: ssh -ND localhost:8080 george@ I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.

View 3 Replies View Related

Slackware :: How To Save Needed Modules Config To Create .config?

Apr 9, 2011

I am running a server with a GRSecurity patched Kernel I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for Still I am not sure what to remove/optimize further now.

My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)

View 5 Replies View Related

General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27

Jan 30, 2011

I need to install module u32 into the netfilter module for kernel 2.6.27.

I did not see the source code in the kernel version I have. where can I find the code for U32 module.

I have checked "" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?

I building the kernel for a MIPS processor.

View 3 Replies View Related

OpenSUSE :: Can't The Module Be Compiled?

Feb 21, 2011

I installed the kernel source on Linux 11.3 with Yast2/pattern/kernel development. The tutorial gaves the command:

$ make -C /usr/src/kernel-source-2.6.8 M=pwd modules

But that command does not work. Linux complaints: no such file.

I check the path and find they like:


View 9 Replies View Related

OpenSUSE Install :: 11.3 & 11.4 Don't Config Usb

Jun 21, 2011

i have a dell studio 1536(service tag: d4tw6h1). when i install opensuse 11.3 and 11.4' the os don't confiig my usb port and can,t access to usb port. i haven't this problem when use xen kernel.

View 1 Replies View Related

OpenSUSE :: Using The Xorg Module For Conky?

Aug 6, 2010

conky require the Double Buffer Extension (DBE) to refresh correctly the screen, in older versions I can add the Load "dbe" in the Module section, but how can I do it with no xorg.conf file? VampirD Microsoft Windows is like air conditioning Stops working when you open a window.

Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with SUSE -


View 4 Replies View Related

OpenSUSE :: Can't Get Vbox Kernel Module

Nov 9, 2010

I have been trying to run my vmachines in virtualbox with no success so I decided to install upgraded packages for upgraded kernel, this means to install them from Virtualization-kernel-HEAD repo.The error is about that known issue where the kernel module can't start.

View 3 Replies View Related

OpenSUSE :: How To Recompiel The Apparmor Module

Sep 10, 2011

In case this is a thread in the wrong section please move it to the right one. Following situation applies.I am using openSUSE 11.1 with modified kernel. Code:# uname -aLinux linux-2c5j 3.0.4-41-desktop #1 SMP PREEMPT Sun Sep 4 18:51:01 CEST 2011 i686 i686 i386 GNU/Linux The compilation did run flawlessly with the SAKC script.However the module apparmor does not load. Infact:Code:# modprobe apparmorFATAL: Module apparmor not found. I understand that I have to recompile the module, right? There I have the first question: wasn't the apparmor module accepted into the kernel (and therefore should be already compiled and available with the normal kernel compile)? Or is this wrong. How can I recompile the apparmor module for my new kernel.

View 1 Replies View Related

OpenSUSE :: Ntfs-Config Don't Start In 11.4?

Mar 11, 2011

Ntfs-Config dont't start in OpenSuse 11.4 - Kde .

Output terminal:

host-002:/home/predieri # ntfs-config
Traceback (most recent call last):
File "/usr/bin/ntfs-config", line 102, in <module>
main(args, opts)


View 5 Replies View Related

OpenSUSE Network :: How To Config USB Wireless Lan

May 13, 2010

This is my 1st time to use openSUSE After install

lsusb -v
Bus 002 Device 002: ID 0411:0137 MelCo., Inc.
Device Descriptor:
bLength 18


View 1 Replies View Related

General :: Dynamic Ip Config In Opensuse 10.3?

Jul 25, 2011

I have comcast xfinity high speed dsl, with a dual boot win2000/opensuse 10.3 system. I'm connected in win2000, but I can't quite figure out how to configure comcast's dynamic ip address' in opensuse 10.3, either on command line, or in KDE with YAST (scream on the latter attempt).

I've looked up all man pages on ip cpnfig, but the problem is that my last internet connection was through a router with a static ip address, and I can't quite figure out the shell command from man pages ( I've tried dozens of combos like ip addr [change] {dynamic|on} etc. from what I could gather from man page instructions, but I can't seem to get the dev object and options worded just right), and I'm about ready to throw my monitor at the wall during every YAST attempt (and of course YAST doesn't pick up my dsl automatically and why it's asking for a comcast userid upon manual entry I haven't the slightest).

View 11 Replies View Related

General :: Using A Config Directory Instead Of A Config File?

May 7, 2011

I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device

<?xml version="1.0" encoding="utf-8" ?>
- <config>


View 1 Replies View Related

OpenSUSE :: Kernel Module Development Barked

Feb 27, 2011

It is bad enough that the kernel gods have basically required that the whole kernel source tree be installed and configured to compile even a simple module but they have made it so a module compiled on one kernel will not work on any other.

To make the situation worse much of the configuration needed to successfully compile a module has been left out of open suse11.3. If you want to replicate the problems may I suggest you attempt to compile the usb-skeleton.c driver example code that is included with each kernel. If it is the intent of the linux community to limit driver development to the professionals then congratulations.

View 9 Replies View Related

OpenSUSE Hardware :: Disable One Of Two Soundcards Using The Same Module?

Feb 8, 2010

I'm using Opensuse 11.2 with the fglrx-driver out of the ati-reposiotry.This fglrx-driver installs a HDA-HDMI-Audio driver using the snd-hda-intel module.My onboard via soundchip uses the same module: snd-hda-intelWith the hdmi-device set to the first device a few apps (like the flash-plugin) use the hdmi-device, which is not connected to any speaker.I can't switch the via-card to the first device in yast, because both cards use the kernel-module. I tried different things on /etc/modprobe.d/50-sound.conf with not results. And it is not possible to put the module on a blacklist, because both cards use it.Is there any way to disable the hdmi-device or to set the via-device to default?Here the output of aplay -l

Sub-Ger�te: 1/1


View 2 Replies View Related

OpenSUSE Hardware :: Sata_Sil Module Will Not Load

Apr 18, 2010

I have recently installed Silicon Image S3114 Raid Controller. It has support via the sata_sil module. It shows up in the diskcontroller information, however the module will not load. The reason being, it does not exist. I checked the directory and sure enough the compiled module sata_sil is not present. Also, I am weary about updated my kernel because of the trouble I had finding a os level that would run this dinosaur.
Suse 10.1
Kernel for ppc

View 1 Replies View Related

OpenSUSE Hardware :: Recompile The Kernel Module For 190.29?

Jun 2, 2010

I am working with OpenCL (note that is different from OpenGL) and recently upgraded from nvidia driver 190.29 to 195.36.15 . After a bit of experimentation i decided to downgrade back to 190.29

However after i did this X complains that i have nvidia kernel module 190.42 and it does not match with nvidia drive 190.29 . Could some one tell me how to recompile the kernel module for 190.29??

View 2 Replies View Related

OpenSUSE Hardware :: Kernel Module Intelfb

Jul 22, 2010

I'm using openSUSE 11.3 with an Intel Corporation Mobile 945GME Express Integrated Graphics Controller. The kernel driver in use is i915, however, in another distribution of Linux, two kernel modules are loaded: i915 and intelfb. I would like to know how to load module intelfb in openSUSE 11.3 as it seems to significantly improve my video card's responsiveness.

View 1 Replies View Related

OpenSUSE Install :: Error - Module Is Unknown - How To Fix It

Apr 20, 2010

After installing ncl 2 sp2, I restarted my computer. Now when I try to login I am getting the following error:Module is unknown. I am running openSuse 11.2 64-bit.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved