I am working with OpenCL (note that is different from OpenGL) and recently upgraded from nvidia driver 190.29 to 195.36.15 . After a bit of experimentation i decided to downgrade back to 190.29
However after i did this X complains that i have nvidia kernel module 190.42 and it does not match with nvidia drive 190.29 . Could some one tell me how to recompile the kernel module for 190.29??
I wish to recompile serial_core module to make a change in the way ioctl works. I don't wish to rebuild the whole kernel package. Can someone point me to the proper method?? I know I will need to download the kernel headers etc. But I would like to avoid the unneeded compiles of things I don't need to recompile.
View 1 Replies View RelatedI am using FC9, I want to write a module that will always show current time after booting.But for that I need not only to load module using insmod/modprobe, but also to compile that module during boot time.How can I perform this 2 steps correctly.
View 11 Replies View RelatedI have a asus M51 Se that not work with 4GB of memory ram, due to a bug of bios. Only work with one slot of 2GB. I find this link https://bugs.launchpad.net/ubuntu/+s...ux/+bug/316079 that help to solve my problem. But for that I have to change a file.
My question is I need to recompile the kernel that I have? if yes, how can i make that without installing other kernel.
This has got me stumped. I expected to do /etc/init.d/vboxdrv setup after the upgrade from 11.3 to 11.4 but the command fails. The log is (it seems to repeat so I only quote the final bits to make it fit into the wordcount limit):
Code:
make KBUILD_VERBOSE=1 -C /lib/modules/2.6.37.1-1.2-desktop/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules
[code]....
I have recompiled a few kernels, but all on 32bit systems so not sure if that has anything to do with it.
Running Arch Linux 64bit, most recent version.
Kernel Output:
Code:
My first thoughts was that it might be my grub bootloader configuration, so had a big play around with that but it didn't fix it. Also made sure support was built for filesystems. However almost all that Fstab mounts are ext3 anyway, and certainly the root and /boot are. Now thinking it may be a memory error so will run a check when I shutdown.
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
any tutorial which helps in boosting system speed by recompiling the kernel
View 9 Replies View RelatedI tried to run some virtual machine using Virtual Machine Manager but the guest OS (windows server 2003) was not able to "see" the rest of my network. I believe VMM did some NAT-ing (192.168.122.x subnet) so i'm not able to "see" my network. I tried various network setting in VMM but couldnt get it to pull my network IP (192.168.1.x subnet).So i installed VirtualBox as a work around because i know VB work when i tried it on my windows machine. I ran into some issue getting VB to run, i think it was that i need to compile the kernel to "optimize" it for VB. I am fairly new to linux so that the impression that i get when i research for the fix to get VB working. In some of the forum post people suggest few things and it seem to me like it to compile the kernel. After a few hours of working i finally got it to compile but the computer crashed during compilation.
I am guess what happened is that i was trying to optimize the kernel for VB but the version of kernel i was using (2.6.18-164.6.1.el5xen) is already optimized for xen (VMM) so it crashed. I am looking to restore or recompile the 2.6.18-164.6.1.el5xen kernel. I am not sure if this is the right thing to do to fix it. With my limited knowledge of linux that all i can think of.
I want recompile my linux kernel in debian 6 64bit,for finding source code what do i do?
i can't find kernel source in /usr/src.
I need to recompile a kernel and I am wondering why I have a /usr/srckernels directory instead of a /usr/src/linux directory?
I installed all the packages I thought I needed.... kernek-devel, gcc, make...
What am I missing to do this "correctly"?
I installed the latest security update for squeeze. It entailed an update of the kernel. Now when it boots, it give continuous kernel error messages about "can't enumerate usb .... " I have a custom kernel compiled from source (not sure about the patch level) from the same kernel 2.6.32. It seems to work OK. Should I worry about the security of this custom kernel or should I try to recompile it? I don't really know how to do any patching of the kernel source.
View 5 Replies View RelatedI've been playing around in attempt to see how small a usable kernel I can build. The theory is that it should mainly be useful for preparing a recovery disk or some such thing; disk drivers and a few network drivers are what goes in.
I built the kernel with the attached config. It boots, reaches the hdd (if I specify root as /dev/sda5 manually), then dies when it tries to start Plymouth (something about catching a SEGV signal). What needs to be enabled to run Plymouth? Alternatively, has anyone managed to remove plymouth from boot on Maverick?
(That would require a modified mountall version, I know.) I'm using the mainstream kernel 2.6.32.27 sources on Maverick (yes, I know Maverick uses 2.6.35; but this does boot).
Hardware: Wireless-RTL8192SE b/g/n, uses an out-of-tree driver (r8192se_pci, from Realtek; Ubuntu builds in an older version of this driver); r8169 works for ethernet; ATI Radeon Mobility 3200 graphics, AMD Neo X2 cpu; SATA hd in AHCI mode.
I have been trying to run my vmachines in virtualbox with no success so I decided to install upgraded packages for upgraded kernel, this means to install them from Virtualization-kernel-HEAD repo.The error is about that known issue where the kernel module can't start.
View 3 Replies View RelatedIt is bad enough that the kernel gods have basically required that the whole kernel source tree be installed and configured to compile even a simple module but they have made it so a module compiled on one kernel will not work on any other.
To make the situation worse much of the configuration needed to successfully compile a module has been left out of open suse11.3. If you want to replicate the problems may I suggest you attempt to compile the usb-skeleton.c driver example code that is included with each kernel. If it is the intent of the linux community to limit driver development to the professionals then congratulations.
I'm using openSUSE 11.3 with an Intel Corporation Mobile 945GME Express Integrated Graphics Controller. The kernel driver in use is i915, however, in another distribution of Linux, two kernel modules are loaded: i915 and intelfb. I would like to know how to load module intelfb in openSUSE 11.3 as it seems to significantly improve my video card's responsiveness.
View 1 Replies View RelatedI want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedThat's it guys. I have successfully installed the proprietary ati drivers in past 6.34 and 6.35 kernels but not in latest .6.36. I'm wondering if this have something to do with compatibility or not.
Installation log shows me some errors I can't recognize:
Code:
I have just reinstalled OS 11.2 but this time the 64bit system variant. I installed the real-time kernel and saw that the apparmor module reported an error and wasn't loaded. I have never looked into apparmor and only knows it has something to do with security, and thus I wonder if it is important to do something with this issue? I plan to use the kernel-rt and have more or less always used a variant of this kernel flavour, often self built. Though I can not recall having seen that error before and I have not used a 64bit system before
View 2 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
I have been having some problems with virtualbox starting. So here is the issue: When I start a VM I get the following: Code: Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
[code]...
I am seeing quite a few entries about the usb. I am not sure if that is common or if its unrelated. I am running x86 11.3, and virtualbox 4.0.4 I have tried to uninstall, and even go back to 3.2
I just up-graded to the latest version of the stable 11.4 64bit kernel on my laptop and it appears that the repositories have not compiled the VirtualBox driver module for the current kernel ... When I make /vboxdrv setup the message is:
Recompiling VirtualBox vboxadd kernel module, NOT. It has been packaged
I think this means that the installed module will not recompile has it was packaged. My kernel version is the lattest :
2.6.37.6-0.5-1
And my VirtualBox was installed from the Virtualization repos (4.0.8.11-1) even made the Vendor change and all. The version Before the lattest (4.0.4-1.6) did not work either. With the same problem. It is very easy to install VirtualBox from the Sun site and every time there is a Kernel up-date one can always make /etc/vboxdrv setup.
I Just loaded 11.2 64 bit, initially the kernel was "default", however, after I installed my Nvidia drivers it changed to desktop, I'm not sure I understand? In GRUB my screen lists it as desktop. Is "default" somewhere? Was it replaced? Things seem to be working alright in most cases although I'm having inordinate problems with "virtual Box" and Vmware server. In Vbox the kernel module won't start.
View 7 Replies View RelatedI've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
I have installed Virtualbox PUEL in 64-bit 11.3. This is a fresh install. My computer has an onboard nvidia 8300GS graphics card. I do not think this is related to the issue. I added the virtualbox repository and installed the program via yast. when I type "VirtualBox" in the terminal I get the following output:
[code]...
I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011
[code]....
I've built my own kernel and now boot.preload complains about the missing preloadtrace.ko kernel module.
Where can one find the source for this module?
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
I need to customize debian live cd and to recompile the kernel.
View 1 Replies View RelatedI have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View Related