My application Help/Hilfe does not show anything. The following messages does appear instead:> Unable to load page> The requested URI "file:///fakefile#index" is invalidWhere do I get an index?I have jet reinstalled susehelp_en and susehelp_de but with no success.
I use (normally) OpenSuse/SUSE LinuxRelease 11.1Kernel Linux 2.6.27.45-0.1-pae Gnome 2.24.1
i am trying to update my system from a new clean install that i made i am running the update from yast and i am getting the listed message:
Code:
Subprocess failed. Error: RPM failed: rpmdb: /var/lib/rpm/Basenames: unexpected file type or format
error: cannot open Basenames index using db3 - Invalid argument (22)
I can't turn on my PC and write jet from my neighbors notebook. Because of problems with Windows updates und ubuntu vpn I installed today Windows 7 again and then openSuse. It was OK. Than I began with set up of different Programms for windows, like WinRar, Avira Antivir ect... As soos as it was done I wanted to begin with set up of openSuse... But the start menu is gone - there is nothing there now! Last time I could choose betwee 2 windows partitions, openSuse start-partition and openSuse fall-Save. -Now there is only "grub>" line
And I doesn't have any idea what I can do, I doesnt know where are startfiles, where is /boot/grub order, I don't know how can grub be used also. But I know that if I try to register my windows 7 agan at the same day, my windows lizens would get invalid. Has someone any idee what can be done?
i want to move the text of a file to another file,using sed command. how can i do it?
View 1 Replies View RelatedI found an icon theme I want to use. The problem is that it has no index file. Is there some kind of script I can run to automatically generate the index file? Or do I have to go about this manually?
View 3 Replies View RelatedI noticed that Ubuntu takes some time in building the file search index. It seems to do it overnight while my PC is powered down )Is there a way to build the index by a command so that I could do searches whenever I wanted, specially immediately after installing a new program?
View 4 Replies View RelatedI use nautilus at the moment on Ubuntu 10.10 Maverick. I use grep cli command to locate text words or comments in a folder containing hundreds of files, each having 5 or 6 text documents in Greek and English.
I am looking for a manager that will index all entries, and enable me to find a phrase or word within these documents quickly. I seen to recall that some time ago I saw a manager that was capable of this, that generated an index, as data was added, but have been unable to locate it with google.
I have a theme for Xubuntu 11.04 I would like to install. How would I do it, I have a Metacity-1 folder, a GTK-2.0 folder, and a theme.index file.
View 4 Replies View RelatedI just installed linux. How can I change the index.html file?
my dir is var/www/index.html
it doesnt allow me to delete it the index.html (permission denied) I can't move a file into it either. (permission denied)
So I made the upgrade to slackware64-current and all of a sudden after my next reboot, startx failed, and x refused to start the output was the following:
Code:
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux hd830 2.6.33 #3 SMP Sat Feb 27 19:42:32 CST 2010 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
Build Date: 23 February 2010 12:09:32PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 6 19:21:18 2010
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: Error inserting button (/lib/modules/2.6.33/kernel/drivers/acpi/button.ko): Invalid module format
WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.33/kernel/drivers/i2c/algos/i2c-algo-bit.ko): Invalid module format
WARNING: Error inserting agpgart (/lib/modules/2.6.33/kernel/drivers/char/agp/agpgart.ko): Invalid module format
WARNING: Error inserting drm (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm.ko): Invalid module format
WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm_kms_helper.ko): Invalid module format
FATAL: Error inserting i915 (/lib/modules/2.6.33/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support. Please also check the log file at "/var/log/Xorg.0.log" for additional information. So then after some googling I got the suggestion to downgrade udev-151 to udev-141, but that yeilded no results. So I did some more googling and a bunch of people who had the same problem said that downgrading module-init-tools worked, so I downgraded from module-init-tools 3.11 something to 3.6 and now, not only does my X no longer work, but no modules are being loaded I believe, for example I saw in my startup that fuse was not being loaded, ndiswrapper which I had installed was not loaded.
I am running debian lenny running apache (latest) i am trying to make a webserver. i put the index.html file in my www folder. it shows up when i go to my site (localhost) i put an index.php file in my www folder and when i try to go to my site it Downloads the index.php file instead of showing it.
View 2 Replies View RelatedI have my home network up and running. I can access my index file by the ip I gave to eth0 - 192.168.0.2
I put this same ip into etc/hosts:
192.168.0.2 localhost localhost.localdomain
One space separates the hostnames from the ip in /etc/hosts.
The hostname command returns: localhost.localdomain
I have /etc/resolv.conf configured the right way, so I can use my isp's DNS servers. I know this because yum works and I can ping anywhere by url. The next step is to learn to access the index file by url locally on my own network.
Is there a program available that would allow me to create an index in a pdf file that has no security restrictions on it? I know people can lock there files so I am not worried about thise but if I have open permissions on a pdf file how do I go about creating an index. It seems that by default you get the thumbnail view but I like to be able to click on a index list to go to a page.
View 2 Replies View RelatedI have a set of PDFs I'd like to index and made searchable. Most importantly, I'd like a web interface so I can search and access remotely. This morning I researched into several different options, but all seemed to fail.
Google Desktop Search - No good because web interface is only to the local host
Beagle - No good because it is no longer support and there are executation errors when running in Maverick
Recoll - No web interface
Strigi - No web interface(?)
I recall using one about 2 years ago that was deployed on Apache Tomcat, but I can't remember the name.
I need a script that can do this: A script that searches all directories and subdirectories for .html files When a .html file is found it creates a index.html file in that folder. It then edits the index.html file and inserts links to all of the .html files that are in that folder into the body. If no .html files are found, it searches for folders. It then creates a index.html file with links to all of the folders.
View 4 Replies View RelatedTrying to get scanning going with my all-in-one, and have been troubleshooting it for awhile, and nothing works. Could use expert advice on this topic for an HP c6380 All-in-One. Printing does fine. All attempts at scanning are failing. scanimage -L says the device is my webcam. I don't know if usb scanner is in /dev.
View 4 Replies View RelatedMy setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
Whenever I try to edit my index.html file with Winscp (SSH), it says I don't have the permission to do so. Is there anyway I can change that?
View 4 Replies View RelatedDo I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?
View 3 Replies View RelatedI am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
I am trying to scan with an All-in-One HP c6380. I get the message:Failed to start scanner: Invalid argumentwhen I press the scan button in the GUI.
View 14 Replies View RelatedI used to run this script just fine on my old server (Debian 5 Lenny x32)¦. but doesnt seem to work with this new one though both will have different software installed.I tell the script to load and I get: 04:55 -!- Irssi: Error loading module testScript/testScript: /user/.irssi/scripts/autorun/testScript.pl: invalid ELF header
The script code:
Code:
#/script load autorun/testScript.pl
use Irssi;
use Irssi::Irc;
#use strict;
use vars qw($VERSION %IRSSI);
[Code]...
I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
View 99 Replies View Relatedi have a weird issue with my web server. every time i enter my domain name instead of processing my index file it downloads it. wth could be the problem first time this ever occurred. recently installed webmin.
View 7 Replies View RelatedUbuntu 1010 server 64bitlighttpdFor the 1st domain,say domain1
I name the index file as:
/var/www/index.html
/home/lighttpd/default/http/index.html
[code]....
I want to remove the index.html file alone in the every directory via bash script, for example i have 5 directories in the path /var/www/vhost
anish
kumar
linux
question
friend
each directories have index.html file now i want to replace the index.html file alone from the other directory /var/tmp/vhosbak
anish
kumar
linux
question
friend
How we can do this using script?
Dear all
I am new to git (and storing multiple copies of my code).
I was using git for one month (git status, git add, git commit) to store my files.
I have problems to add more files to my branch
git add BasisExpansion.R
fatal: Unable to write new index file
this was working great unless the day my system administrator destroyed my main partition (it was an accident) and installed everything from scratch. My home directory stayed intact (I did not lose any files not git files that are stored under /home). But from this point of time git returns always that error. My system administrator creater the same user and group as my old user was but this didnot fix the problem.
I am not sure If I can recover my old git structure or would it be better to wipe out the old git dir and start a new one?
Can anyone point me to already built and mostly working utilities that will catalog the contents of (external) USB and flash media in a way that they might be searched?With cheap (under $100 US) terabyte external drives, it is too easy to get another drive and fill it. I'm looking for utilities or applications that will help me know what I have, cull the duplicates, and avoid the need to spin a drive just to see if it holds what I seek.
Years ago there were utilities that would read the contents of diskette media and create a printable "index" or "catalog" page. The pages were conveniently sized to match the diskette so that one could store the page in the diskette sleeve for future reference.Later, the pages got replaced with applications that stored a disketter ID along with each file name. One could then search for a name, or pattern, and discover which diskette held the file(s) of interest. Today we don't have diskette sleeves, but we do have cases for our external USB drives and wallets for our flash media. A printed index would be nice to have.
I need to create an index over a folder, subfolders and files. Preferably as a figure. Is there a quick and easy way to do that?
View 2 Replies View Related"I found this page:Index of /repositories/Emulators:/Wine/openSUSE_11.0I'm a little confusedI need more information, but then again, so do you, that isn't very descriptiveEdit/Delete Message Reply With Quote Quick reply to this messageimachavelView Public ProfileSend a private message to imachavelFind all posts by imachavelAdd imachavel to Your Contacts #2 (permalink) Add to imachavel's Reputation Report PostUnread Today,03:27imachavel imachavel is online nowStudent PenguinJoin Date: Dec 2009Posts: 81imachavel hasn't been rated much yetDefault Re: wine repositoriesdo I have to download all of those?
ARGH, I want to shoot myselfmaybe I'll move this thread to applications"I moved this here from games, don't know why I'm having such a hard time with wineoriginally decided not to mess with it too much, but now I'm wanting to use itanyway the page didn't look too confusing at first, but now I am struggling with it a little bit