I tried installed Virtualbox but when I click on the icon "Oracle VM Virtualbox" it acts like its loading then the window in the task bar disappears and nothing happens, there were no errors on the install mind you.
View 9 RepliesAdded the repo and installed Virtualbox.
Added user as vboxusers group
Added the following packages according to the error log
- make gcc kernel-source dkms
Finally /etc/init.d/vboxdrv setup reports an error
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel
[Code].....
I have installed Hydrogen with the add & remove software which seemed to install fine in OPenSuse11.3 but when I click the icon nothing happens at all
View 6 Replies View RelatedI got sick to DEATH of Adobe AIR and TweetDeck screwing up constantly, and then Adobe announces there will be no more Adobe AIR for Linux. Fine, screw 'em, I'll switch to something else. So I hunt around for the options, most of which suck. Then I discover Choqok is already installed on my machine (11.4). Except the POS doesn't work.
To use it, I have to authenticate with my Twitter account. So I click Add, select Twitter, it pops up the dialog. I leave the alias as Twitter, click the authenticate with Twitter button. The Firefox icon pops up and bounces around - but Firefox is already running. So nothing happens! No Twitter access, no page loaded, nothing. I shut down Firefox, try it again. Same deal. As usual, no one bothered to test this POS software before releasing it. how to get this **** to authenticate to Twitter in the absence of ANY useful documentation for this junk?
Is there a way to get Oracle virtualbox on Jessie yet? I only see one for wheezy at the oracle site.
View 3 Replies View RelatedI was notified by the updater that VirtualBox-3.2-3.2.10_66523_fedora12-1 (x86_64) was available to install. So I clicked [Install Update] and got the following Transaction error:The GPG keys listed for the "Fedora 12 - x86_64 - VirtualBox" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.
View 2 Replies View RelatedIm trying to run Arch Linux off Oracle vm virtualbox and everything going fine until It wants to wipe my entire hard drive. To be fully honest im afraid to touch it. I feel like it might bite my finger off if I poke at it in my usual way (first time ever using VM) so I was wondering if anyone has any tips or advice for me. Maybe someone elce has tryed this before and can tell me my computer wont explode when I partition. (I know it wont but I only have 1 computer and afraid to ruin it with my "experiments" cant afford a new one) I think because its VM it will only partition the space I set for it when I started the VM box. Just looking to be safe before I try it
View 4 Replies View Relatedhow to install linux redhat and oracle 11g in sun virtualbox?. That thing is giving me a lot of headache.
View 2 Replies View Relatedi have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI cannot remove several icons from my KDE panel. When I right click them, the "remove this icon" does not appear. Others are removable. Sounds like a permissions problem
View 9 Replies View RelatedWhen I click the Firefox icon, normally I can maximize and minimize in the window (either top or bottom panel). This has disappeared and I am not sure why. I had installed [URL... and suddenly after deleting/cleaning it up/restoring panels I cannot see why or how I can easily maximize or minimize any panel, not just Firefox.
View 4 Replies View RelatedI have seen when people click on an icon that is on the doc, it opens up a pop up window that has application you can click on. I have Cairo Dock. With it, I can add a shortcut menu and a Stack icon. From there,I can add applications, but they have a generic *.desktop icon. Is there any way to get the same Mac effect from Cairo Dock, or maybe even a shortcut to the applications folder in Ubuntu?By the way, can someone tell me the default path to the applications folder?"
View 1 Replies View RelatedWhen I right click on a desktop icon, a menu comes up. How can I modify this menu?
View 1 Replies View RelatedI have a Network file system that I would like to mount on demand. Is there a way (as a user, not as sudo) to make an icon om my desktop that I can click to mount and unmount. I would like the icon to be persistent - i.e., it should not go away when I unmount the share.
View 2 Replies View Related10.10....can't click on a desktop icon and get it to open...for example a mounted drive BUT if I right click and select open it will but none of the icons in the open drive will then open upon clicking...this is a relatively new install and it worked fine until very recently...I've swapped the mouse and moved it to another usb port.
View 1 Replies View RelatedI have a freshly installed ubuntu 9.10 but I can't connect wirelessly. When I click on the network icon, there are no wireless networks available. (Disabled?) And I've tried maybe activating it, but my Hardware Drivers come up empty. wireless adapter
[code]...
this morning I got a bad surprise: Firefox doesn't start upon my click on its icon.
Tried to uninstall and reinstall Firefox.... Even its icon disappeared from menus after reinstallation (no way to see it in the menu editor). I tried to start it from command line:
code
firefox %u
and got this reply from Ubuntu:
GLib-WARNING **: g_set_prgname() called multiple times
I am using Chrome now but I had some useful add-ons on Firefox and wouldn't like to loose them...
When I right click on the wireless icon (the four bars, which are empty and have an X by them now). I click information about the connection, and it says "no active valid connection found" (or something like that, it's in spanish).I right clic and clic "edit connections" and it shows me five tabs: cabled, wireless, broad band, vpn, and dsl. The wireless tab is empty, there are no connections.I looked at ubuntu help, and it says to put this in terminal:Quote:sudo lshw -C networkand that it should say either "CLAIMED, UNCLAIMED, ENABLED or DISABLED"but instead it says, really fast,CPUIDPCI (sysfs)(and something else too fast to read)I put in another series of commands to the terminal to give information-- I read these on another post, that they're necessary for someone (you! I hope) to tell me what's wrong and how to fix it.
(I got these results by copying them and putting them on a USB, obviously)any ideas would be welcome!!(in non technical language if possible, I don't know much about computers, though I'm learning!)
lspci
SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
[code]....
where can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.
View 4 Replies View RelatedWhen I click on the Ibus icon, I always get a message:
Code:
IBus daemon is not started. Do you want to start it now?
I click yes, and I get:
Code:
IBus has been started! If you can not use IBus, please add below lines in $HOME/.bashrc, and relogin your desktop.
I have no idea how to add the amentioned lines to the amentioned file, I guess its via terminal, but I dont know what do I have to type
I used to be able to open the Rhythmbox window by just clicking the Rhythmbox icon in the notification area. Now in Lucid it brings up a menu (isn't that what right click is for??) and I have to select "Show Rhythmbox", and sometimes I accidentally click on "Quit" and I have to start Rhythmbox again. It's a real PITA. Is there any way to make it the way it was before? I've looked at the Rhythmbox options and can't find anything about it. (Why do GNOME applications always have barely any options?)
View 9 Replies View RelatedI run Ubuntu 10.10, recently I got this problem. if I open more than one program, and click on icon of them on task bar to switch between them, KDE crash and restart with log in screen. now since 2-3 days this restart also happening when I ALT+TAB to switch between running programs .
View 4 Replies View RelatedBanshee will not run when I click its icon in the launcher. The little arrow appears next to it, and then nothing happens. I'm running Ubuntu 11.04. I ran it in the terminal and got this (x's inserted for username):
Code:
[Info 06:10:11.264] Running Banshee 2.0.0: [Ubuntu 11.04 (linux-gnu, x86_64) @ 2011-06-28 05:39:10 UTC]
[Info 06:10:12.004] Updating web proxy from GConf
[Info 06:10:12.034] All services are started 0.637278
[Code]...
Another piece of information that may be relevant: this started happening immediately after I installed a GStreamer plugin, specifically the one for aac, xvid, mpeg2, and faad. I've since uninstalled this package, but Banshee still will not load.
It was working until a recent update. I have the icon in my system tray. Networkmanager is running. I have tried to reboot the computer and restart the network manager. All switches that could turn the network off is on. Every time I click on the icon in the system tray it tell me the networkmanager is disabled.
View 11 Replies View RelatedUnder Gnome on 10.10, does anybody know how to make the Rubbish Bin open when one double-clicks the icon as opposed to single-click?
View 7 Replies View RelatedI have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedI try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies View RelatedI've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
View 1 Replies View Related